• 한국기계연구소 소보
• /
• v.4 no.2
• /
• pp.31-39
• /
• 1982

• The Inventors News
• /
• no.17
• /
• pp.5-6
• /
• 2003

한국특허정보원 이종익 관리본부장 선임 - 어디서나 꽃 키우는 `캔 플라워` 등장 - 린나이코리아, 롯데기공 특허침해 소송에서 승소 - 세계적 기업가로 성장한 가정주부 - 특허 분쟁에서 승소하는 법 - 미니카드 바람이 불고 있다 - 아이버 게이버 박사 `발명에 집중하는 과학`을 강조

• Therapeutic Science for Rehabilitation
• /
• v.7 no.3
• /
• pp.47-58
• /
• 2018

Objective : This study was conducted to investigate the effects of iPad applications on improvement of attention and short-term memory in mild dementia. Methods : A single-case experimental study using A-B-A design was conducted. A total of 20 sessions, including 5 each for baseline phase A and A' and 10 for the intervention phase, were provided to the subject. Interventions were only provided during the intervention phase and were iOS-based iPad applications named "Memorado-Moving Balls" and "Circles." "Fit Brains-Matching Pairs" and "Fit-Brains-Spot the Difference" were used for each session to evaluate attention and short-term memory. MMSE-K, K-TMT-e A and B, and DST assessment tools were used pre- and post-intervention to assess attention and memory. Result : Fit Brains scores indicated improvement in both attention and memory during the intervention phase. K-TMT-e A showed 3 increased correct points and 3 reduced error points, and B showed 7 increased correct points and 2 reduced error points in post-tests, but the DST and MMSE-K showed no meaningful change. Conclusion : This single-case study identified improvements in attention and short-term memory in a person with mild dementia using iPad applications. Further studies regarding different applications and larger samples with long-term designs are necessary.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.40 no.5
• /
• pp.513-523
• /
• 2016

The stress concentration factors and stress intensity factors for a simple beam and a cantilever are analyzed by using finite element method and phtoelasticity. Using the analyzed results, the estimated graphs on stress concentration factors and stress intensity factors are obtained. To analyze stress concentration factors of notch, the dimensionless notch length H(height of specimen)/h=1.1~2 and dimensionless gap space r(radius at the notch tip)/h=0.1~0.5 are used. where h=H-c and c is the notch length. As the notch gap length increases and the gap decreases, the stress concentration factors increase. Stress concentration factors of a simple beam are greater than those of a cantilever beam. However, actually, the maximum stress values under a load, a notch length and a gap occur more greatly in the cantilever beam than in the simple beam. To analyze stress intensity factors, the normalized crack length a(crack length)/H=0.2~0.5 is used. As the length of the crack increases, the normalized stress intensity factors increase. The stress intensity factors under a constant load and a crack length occur more greatly in the cantilever beam than in the simple beam.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.10
• /
• pp.1163-1169
• /
• 2014

In this study, a fatigue assessment method for vehicle suspension systems having welded geometries was established under a bending loading condition. For the fatigue life estimation of the actual product's welded joints made of different steels, bending fatigue tests were performed on welded specimens with a simplified shape for obtaining the moment-fatigue-life plot. Further, geometry modeling of the simplified welded specimens was conducted. Results of finite element analysis were used to obtain the stress-fatigue-life plot. The analysis results were also used to calculate the stress concentration factors for notch-factor-based fatigue life estimation. The test results were compared with results of the general notch-factor-based fatigue life estimation for improving fatigue assessment. As a result, it was concluded that both the welded fatigue tests and the notch-factor-based fatigue life estimation are necessary for accurate fatigue assessment.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.13 no.1
• /
• pp.12-17
• /
• 2010

Oscillating Water Column (OWC) device has been widely employed in the wave energy conversion. Wave Focusing Device (WFD) is proposed to be helpful for improving the operating performance of OWC chamber. In the present paper, a Numerical Wave Tank (NWT) using two-phase VOF model is utilized to simulate the generation and propagation of incident regular waves, water column oscillation inside the chamber. The NWT consists of the continuity equation, Reynolds-averaged Navier-Stokes equations and two-phase VOF functions. The standard k- turbulence model, the finite volume method, NITA-PISO algorithm and dynamic mesh technique are employed. Effects of WFD on the operating performance of OWC chamber are investigated numerically.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2019.05a
• /
• pp.33-33
• /
• 2019

최근 반복적인 도시침수 피해가 발생하고 있으나 다양한 강우 및 홍수 자료를 이용하여 실시간으로 침수분석을 실시할 수 있는 기술력이 부재한 실정이다. 한정된 시나리오에 따라 다양한 강우패턴에 의한 침수지역 파악에 어려움이 있으며, 불필요한 자료의 사용으로 인해 짧은 시간에 발생하는 도시침수에 대해 실시간으로 대응하는 데에 한계가 있다. 본 연구에서는 다양한 강우패턴과 극치강우 사상을 반영하기 위한 강우시간 분포법을 나타내고자 하였으며, 강우-유출 자료에 대한 최적의 자료조합을 선정하는 정량적 기준을 제시하고자 하였다. 지역 특성에 따른 극치강우사상의 시간분포에 대한 연구가 다양하게 진행되어 왔지만, 기존의 강우시간분포는 다양한 강우의 집중현상을 나타내기에는 한계가 있음을 보였다. 따라서 본 연구에서는 기존 강우시간분포 기법의 단점을 보완하고 극치강우사상의 집중지속시간 특성을 반영한 강우시간분포 방법과 Huff에 의한 강우시간 분포법을 사용하여 다양한 강우시나리오를 생성하였다. 본 연구에서는 부산 및 울산 연구대상지역의 도시유출해석의 입력 자료로서 사용하였다. 강우 및 유출 자료의 상관성 분석과 불확실도 분석을 기반으로 추후 홍수예측을 위한 최적의 입력 자료를 선정하고자 하였다. 위의 과정들을 통해 다양한 강우조건에 따른 연구대상 지역에서의 침수예상도를 분석할 수 있었으며, 선정된 극치강우사상을 통해 다양한 강우의 집중현상을 나타낼 수 있었다. 1차원 도시유출해석을 실시하여 구축한 강우-유출 데이터베이스의 최적화를 위해 불확실도 분석을 실시하였으며, 수리학적 특성이 고려된 입력 및 출력자료에 대한 사용자의 합리적인 판단을 위해 정량적 기준을 제시하고자 하였다. 더욱이 제시된 방법론을 이용함에 따라 지속적으로 나타나는 국지성 호우와 급변하는 수재해 양상에 능동적으로 대처하는데 도움을 줄 수 있는 기초자료를 제공할 것으로 판단된다.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.31 no.6
• /
• pp.381-388
• /
• 2018

This paper presents a generalized finite element formulation for plastic hinge modeling based on lumped plasticity in the classical Euler-Bernoulli beam elements. In this approach, the plastic hinges are effectively modeled using proper enrichment functions describing weak discontinuities of the solution. The proposed methodology enables the insertion of plastic hinges at an arbitrary location without modifying the connectivity of elements. The formations of plastic hinges are instead achieved by hierarchically adding degrees of freedom to existing elements. Convergence analyses such as h- and p-extensions are performed to investigate the effectiveness of the proposed method. The analysis results indicate that the proposed generalized finite element method can achieve theoretical convergence rates for both cases where plastic hinges are located at nodes and within an element, thus demonstrating its accuracy.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.23 no.6
• /
• pp.109-117
• /
• 2009

In this paper, an analytical model using equivalent magnetic circuits for the PMA-SynRG is presented. The lumped parameter model (LPM) is developed from machine geometry, stator winding and machine operating specifications. By the LPM, magnetic saturation of rotor bridges is incorporated into model and it provides effective means of predicting machine performance for a given machine geometry. The LPM is not as accurate as finite element analysis but the equivalent magnetic circuits provide fast means of analyzing electromagnetic characteristics of PMa-SynRG. It is the main advantage to find the initial design and optimum design. The initial design of PMa_RSG is performed by LPM model and FEM analysis, and the final PMA-RSG design is optimized and identified by FEM analysis considering actual machine design. The linear LPM and the nonlinear LPM are programmed using MATLAB and all of machine parameters are calculated very quickly. To verify justification of the proposed design of PMa-RSM, back-EMF is measured.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.511-511
• /
• 2015

국가적 측면에서 수자원의 효율적 관리는 국민의 안전 등 중요한 요소이며, 이를 위하여 수자원 장기 계획을 필요로 한다. 설계홍수량의 적정성 판단 및 첨두홍수량의 파악은 수자원 계획에 꼭 필요한 요소이다. 이를 산정하기 방법으로는 "설계홍수 추정 지침서(1993, 국토교통부)"에서 제시한 비유량법을 활용한 추정공식을 제시한 바 있다. 하지만, 기존에 제시된 비유량 산정 공식의 경우 유역면적 하나만을 매개변수로 하는 회귀식이기 때문에 급변하고 있는 강우 패턴 등의 반영이 어려울 것으로 판단되었으며, 특히 도시화 및 기후변화의 영향으로 인한 불투수면적의 증가와 집중호우 등의 극치수문사상이 발생됨에 따라 기존의 비유량법에 의해 첨두홍수량을 추정할 경우 많은 차이가 있을 것으로 예상된다. 또한, 하천기본계획 및 소하천정비종합계획 등 대부분의 하천관련 정비계획에서는 단위도법에 의해 산정된 홍수량을 계획홍수량으로 결정하고 있으며 비유량법에 의한 첨두홍수량은 계획홍수량의 적정성 검증 정도로만 활용하고 있으며 신뢰성에 의문이 제기되고 있는 실정이다. 따라서 도시유역을 대상으로 최근 수립된 하천기본계획 등의 계획홍수량 자료를 수집하고, 기존 비유량공식을 적용한 결과를 비교 검토하여 비유량 적용의 적정성을 판단하며 개선방안을 모색하고자 한다.