• Journal of the Korean Society of Propulsion Engineers
• /
• v.22 no.6
• /
• pp.94-103
• /
• 2018

The purpose of designing composite lattice structure which applied to launching vehicle and tactical missile body is to minimize the thickness and weight for applied load. It is usually made of carbon fiber; fabricating with filament winding process over silicon mold, and provided with a window opening for inspection purpose if necessary. In this paper compression test is conducted without window opening in lattice structure and preliminary FEA is carried out to confirm its accuracy. And then FEA is performed for the case of window opening to evaluate the soundness and the safety factor of the structure. We have calculated for two kinds of window shape; rectangular one and hexagonal one. And we have calculated safety factors of the lattice structure with window opening in every case based on failure strength of rib and knot with varying the thickness and location of the window for hexagonal shape. Through our investigation, we have found out the followings; (1) the hexagonal shaped window is shown higher safety factor than rectangular one, (2) a window in a certain location is shown higher safety factor than others, (3) although the soundness of window structure is improved as increasing its thickness, a window of a certain thickness is shown higher safety factor than others because of stress concentration.

• Journal of Korean Society of Steel Construction
• /
• v.10 no.3 s.36
• /
• pp.497-508
• /
• 1998

The objective of this study is to examine fatigue behavior of as-welded butt-welded joints with incomplete penetration from fatigue tests. The test results are the following. In static tests, tensile strength and yield strength of butt-welded joints are constant regardless of incomplete penetration. And in fatigue tests, fatigue strength of fully penetrated butt-welded joints satisfies fatigue limits, prescribed in Korean Specifications and JSSC, respectively. The results show that as the magnitude of incomplete penetration increases, fatigue strength decreases. In fractured surfaces, full and incomplete penetration specimen show different shapes, it is because that stress concentration factor vary with structural geometry in bead toe and root tip, and certify in FEM analysis. This study suggests that defects such as incomplete penetration from welding must be avoided in order to attain the sufficient life of steel structures.

• Journal of the KSME
• /
• v.16 no.4
• /
• pp.41-48
• /
• 1976

재료의 피로문제에 대해서는 꽤 오래 전부터 많은 연구가 이루어져왔고, 피로의 현상파악에서부 터 피로이론의 구명, 나아가서는 실제문제로서의 피로설계, 피로수명예측 등에 기여한 업적은 아 주 크다 하겠다. 그러나 종래의 피로문제연구의 방향이, S-N 곡선에서 얻어지는 피로한계강도 (더 정확한 표현으론 피로파괴한계강동)에 바탕을 두고, 정력확적인 설계관례인 안전계수의 도입 을 빌려, 피로강도를 실용화할려는 선에서 이루어져 왔다고 보겠다. 재료의 피로한계강도란, 그 정의로 미루어, 다분히 정적으로는 극한강도 또는 피로강도의 개념에 견주어 질 수 있는 공칭응 력으로써 탄성학적으로 해석될 수도 없고, 다만 탄역성이론의 개념을 바탕으로 근사해석례만이 허용되고 있을 뿐이다. 재료에는 소위 평활재이건 절결재이건 간에 또 검출여부에 관계없이, 내외 부에 대소각종의 결함이나 역학적 불연속부가 잠재해있음은 이미 공지의 사실이며, 이들 결합, 불 연속부등이 외하중하에서 응분의 응력집중원이 되어 재료를 전반적인 파괴로 몰고 갈 수 있다 함 도, 또한 이러한 역학적거동이 피로파괴에 까지 확장해석될 수 있을 것이란 것도 이미 잘 알려져 있는 터이라 하겠다. 재료내외부의 제결합을 응력집중이 극대인 crack로 대체해서 외하중하에서 의 응력장거동을 해석한 선형탄성파괴역학(LEFM)은, 바로 이러한 실제재료의 강도설계에 보다 큰 정확성을 부여한 방법론적 학문이라 하겠고, 나아가서는 재료의 파괴기구를 파헤치는데 진일 보적인 역학적인 수법이라 하겠다. 취성파괴, 연성파괴에 바탕을 둔 파괴역학(LEFM)을 피로파괴 에 적용시키는 데는 상당한 문제점들을 수반할 것임은 충분히 인지되나, 제한된 경계조건하에서 의 적용 예는 종래의 어떤 방법에 의한 것 보다도 피로강도설계, 안전사용 피로수명예측 등에 획기적인 진전을 보여주고 있다. 파괴역학은 crack 재의 강도학이고, 더 구체적으로 음력학대계수 (stress intensity factor) K 또는 이와 연연되는 parameter 인 strain energy release rate(G), crack-tip plactic zone size r$_{p}$,.rho., crack-tip opening displacement .phi., strain intensity 등을 쓰는 재료강도학이기 때문에, 이 수법을 피로파괴에 적용시킴은, 종래의 공칭응력으로 피로 문제를 다루던 방법과는 판이하다 하겠다. 본고에선 파괴역학의 관점에서 피로구열의 안정성장을 논하고, 과거 10여년간의 피로 crack문제에 대한 연구방법, 실험방법 등을 소개하는 방향으로 고 를 진행시켜 나가겠다.

• Tunnel and Underground Space
• /
• v.20 no.1
• /
• pp.65-72
• /
• 2010

Crack-controlled blasting method which utilizes notched charge hole has been proposed in order to achieve smooth fracture plane and minimize the excavation damage zone. In this study, the blast models, which have a notched charge hole, were analyzed using dynamic fracture process analysis software to investigate the effect of the geometry of a notched charge hole and decoupling indexes of the charge hole on crack growth control in blasting. As a result, crack extension increased and damage crack decreased with the notch length. Ultimately, stress increment factors and resultant fracture patterns with different notch length and width were analyzed in order to examine the effect factors on the crack growth controlling in rock blasts using a notched charge hole.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.12 no.4
• /
• pp.35-44
• /
• 2008

A self-centering energy-dissipative(SCED) bracing system has recently been developed as a new seismic force resistant bracing system. The advantage of the SCED brace system is that, unlike other comparable advanced bracing systems that dissipate energy such as the buckling restrained brace(BRB) system, it has a self-centering capability that reduces or eliminates residual building deformations after major seismic events. In order to investigate the effects of torsion on the SCED brace and BRB systems, nonlinear time history analyses were used to compare the responses of 3D model structures with three different amounts of frame eccentricity. The results of the analysis showed that the interstory drifts of SCED braced frames are more uniform than those of BRB frames, without regard to irregularity. The residual drift and residual rotation responses tended to decrease as irregularity increased. For medium-rise structures, the drift concentration factors(DCFs) for SCED systems were lower than those for BRB frames. This means that SCED-braced frames deform in a more uniform manner with respect to building height. The effect of the torsional irregularity on the magnitude of the DCFs was small.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2012.05a
• /
• pp.929-929
• /
• 2012

제주도는 연평균 강우량이 1,975mm에 달하는 우리나라 최다우 지역이지만 하천은 주로 한라산 정상을 중심으로 남 북사면 방향으로 급한 경사를 이루며 발달하고 있으며 하천연장은 대부분 15km 내외로 내륙지역의 하천에 비하여 매우 짧은 특성을 보이고 있다. 투수성이 높은 지질학적 특성으로 인하여 집중 호우시 짧은 기간 동안만 유출이 발생하고 평상시 대부분의 하천은 건천의 상태로 유지되고 있다. 향후 기후변화에 의하여 강우량 및 강우강도의 증가로 인한 강우패턴 변화로 집중호우 및 강력한 태풍의 가능성이 지속적으로 증가할 것으로 예측되고 있으나 제주도에서는 기초 수문자료의 확보조차 어려운 실정이며 강우사상에 따른 하천유출 특성 해석 연구는 거의 전무한 실정이다. 본 연구에서는 제주도 도심부에 위치한 화북천 유역을 대상으로 SWAT 모델 및 WMS(HEC-HMS) 모델을 이용하여 장단기 강우에 따른 유출 특성을 해석하고자 한다. 유역 내 수문 기상 자료는 기상청 관할 AWS 및 기상관측지점 자료를 수집하여 사용하였으며 DEM(미국 USGS), 토지피복도(국가수자원 종합정보시스템), 토양통도(농업과학기술원)의 자료를 각각 구축하여 모델의 입력자료로 사용하였다. 또한 제주특별자치도 수자원본부에서 운영하는 화북천 하류지점의 실 관측자료를 이용하여 모델의 결과치를 검 보정 하였으며, 모의결과의 적합성을 판단하기 위하여 상관계수의 제곱( ), 평균 제곱근 오차(RMSE), 모형 효율성계수(ME)를 이용하였다. 모델링 기법을 이용하여 장기간(2008.1.1~2010.12.31) 동안의 유출량을 산정한 결과 2008년에는 전체 유역 평균 강우량 중에서 5.66%가 유출되었으며, 2009년도에는 3.47%, 2010년도에는 8.12%가 유출되었다. 화북천 유역은 단일강우 40~50mm 발생시에도 유출은 발생하지 않으나 선행강우가 발생시에는 20mm의 강우에도 반응을 하고 50mm 이상에서 급격한 유출이 발생하는 특징을 도출하였다. 향후 유역 내의 많은 실측 유출량 관측자료를 구축하고 모델 개선을 통하여 모델링 기법을 적용한다면 보다 정밀한 하천유출량 산정 및 유출특성 해석이 가능할 것으로 판단된다.

• Journal of Korea Port Economic Association
• /
• v.37 no.1
• /
• pp.103-119
• /
• 2021

Ports in Korea have been increasing in terms of volume while they have performed functions and roles such as industrial ports in promoting industries of their hinterlands as well as commercial ports supporting imports and exports. Nevertheless, specialization degree is different from port to port by cargo type and the changes in cargo volume. This study aims to analyze the structural changes and the degree of concentration and specialization by cargo type and port between 2001 and 2020. Top 10 ports were analyzed in terms of traffic volume by categorizing liquid, dry, general cargo and containers. HHI(Herfindahl-Hirschman Index), LQ(Location Coefficient), and shift-share analysis were employed in order to identify the degree of concentration, specialization and changes in cargo volume by port and cargo type. As a result of the analysis, the degree of port concentration and specialization for each cargo of 4 categories have maintained a high level, and no significant difference were found in fluctuations over the past 20 years. As a result of calculating the flucation of cargo volume through the shift-share analysis, the growth rate of liquid cargo was high in Yeosu Gwangyang Port, Pyeongtaek Dangjin Port in dry cargo, and Busan Port in general cargo and container ports. The result implies that it is not expected that the structural changes including degree of cargo concentration, specialization and relative fluctuation of cargo volume is significant in Korean ports in the future since the effects of economies of scale and clustering were achieved to the great degree.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.14 no.3
• /
• pp.49-57
• /
• 2010

Most previous research on the seismic response of structures with plan irregularities have focused on the relationship between the eccentricity and the amount of torsion. This approach cannot provide the direct relationship between the irregularity and the damage. Therefore, an investigation on the relationship between the eccentricities of buildings with plan irregularities and the damage index was performed. Inelastic dynamic time-history analyses were performed on one-story buildings with various eccentricities. For the damage assessment, a 3D damage index was adopted to reflect the effect of the bi-directional response and torsion. Based on the analysis results, buildings with eccentricities of 10%, 20% and 30% will suffer 3~5%, 13~18%, and 33~47% more damage than their regular counterparts, respectively.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.30 no.4
• /
• pp.1-9
• /
• 2002

There is the high possibility of crack initiation from mechanical joints, which are widely used in aircraft fuselages, due to the development of stress concentration and contact pressure. In this paper, the mixed-mode stress intensity factors at the surface and deepest points of an inclined quarter elliptical corner crack in mechanical joints are analyzed by the weight function method. The coefficients included in the weight function are obtained by finite element analyses for reference loadings. Critical angle at which mode I stress intensity factor becomes maximum is determined by analyzing the variation of stress intensity factors along incline angle of crack and the effects of the amount of clearance and crack depth on the critical angle are investigated.

• Journal of the Korean Society for Railway
• /
• v.10 no.6
• /
• pp.806-811
• /
• 2007

The derailment is defined as phenomena in which the wheels run off the rail due to inordinate lateral force generated when wheel flange contacts with the rail. Derailment coefficient is typical standard assessing running safety and derailment. The traditional method measuring by strain gage adhered to wheels is very complicated and easy to fail. It also requires too much cost and higher measurement technique. Therefore it can hardly ensure safety because we can't confirm at which time we need to identify safety. In this paper, we principally researched the method measuring easily wheel load generated by contacts between wheel flange and the rail, and lateral force. Correlation of vibration and displacement which was related physical amounts of wheel load and lateral force, was investigated and analyzed through analysis, experiment and measurement. And it is presents new measurement method of derailment coefficient which can estimate derailment possibility only by movement of vibration and displacement, by which we understand the rate for acceleration and displacement to contribute wheel load and lateral force and compare actual data of wheel load and lateral force measured from wheel.