• 오토저널
• /
• 제7권2호
• /
• pp.18-26
• /
• 1985

최근에 들어 환경보전에 대한 시민의식이 고조되고 깨끗한 자연 및 생활환경을 유지하려는 노력 이 각계에서 일고 있다. 이와 관련된 문제점의 하나가 대기오염이며 이 오염원 중의 하나가 자 동차 배기물로서 특히 탄화수소(hydrocarbon:HC), 일산화탄소(CO), 질소산화물(NO$_{x}$)에 의 한 대기오염의 심각히 대두되어 왔으며 현재 환경청 등에 의해 국가적 차원에서 자동차 배기물에 대한 규젤ㄹ 강화하려는 움직임을 보이고 있다. 미국의 경우 연도별 배기규제기준을 살펴 보면 표.1 과 같으며, 국내에서도 88년까지 미국, 일본수준으로 신규제작차의 배출혀용기준을 강화할 계획으로 있다. 표1의 규제치르 보면 60년대의 비규제기간중의 배출량에 비해 탄화수소의 경우 96%, CO는 96%, NO$_{x}$는 76%의 감소를 보여주고 있으며 이 규제치는 5만mile을 규정된 방법으로 주행한 후 복잡한 사이클과정의 연방정부 시험절차 (Federal Test Procedure, FTP 또는 Constant Volume Sampling-Cold and Hot, CVS-CH)를 거쳐 만족하여야 한다. 상기의 규제치들을 만족시키기 위한 실용적 방법으로서 촉매전환기(catalytic converter)가 채택되고 있 으며 따라 본 해설에서는 자동차용 촉매전화기에 대한 자료들을 정리하여 특성, 문제점 등을 살펴 보고자 한다.

• 수산해양기술연구
• /
• 제36권3호
• /
• pp.249-256
• /
• 2000

In order to investigate the effectiveness of methanol, which has high latent heat of evaporation and oxygen contents, for DI diesel engine performance and exhaust emission, the methanol was injected at the suction port of DI diesel engine. The injector used for test was conventional gasoline engine injector and controlled the quantity of methanol per cycle by the power supply controller which designed specially for injector. The results shown that the maximum pressure point was delayed, the value of maximum pressure was decreased, and the concentrations of both NOx and Soot were decreased, as the methanol injection quantity increased, and also the thermal efficiency of engine injected methanol under the high load condition was similar to no methanol injection but under the medium load condition was decreased within the experimental conditions.

• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2005년도 후기학술대회논문집
• /
• pp.9-10
• /
• 2005

A study on the combustion and exhaust emissions characteristics by using Emulsion Fuel in Diesel Engine is performed experimentally. In this paper, the experiments are performed at engine speed 1800rpm, emulsion fuel ratio is 0%, 5%, 10%, 15%, 20%, 25%, and main measured items are specific fuel consumption, NOx and Soot emissions etc. The obtained conclusions are as follows. 1) Specific fuel consumption increase maximum 19.8% at low load, but is not effected at full load. 2) NOx emissions decrease 30% in case of emulsion fuel ratio 25% at full load. 3) Soot emission decrease 58.9% in case of emulsion fuel ratio 25% at full load.

• Journal of Advanced Marine Engineering and Technology
• /
• 제21권4호
• /
• pp.356-363
• /
• 1997

Many research works have been carried out to investigate the factors governing the performance of diesel engine. The area of the study has been focused on reducing both of NOx and smoke because of many difficulties to reduce them simultaneously in diesel engines. One of the efforts is an application of EGR technology to reduce NOx emission, which is very effective, but increases other emissions and makes fuel economy worse. In order to solve the problem, EGR is employed with water emulsified fuel and tested in this paper. Emulsified fuel is produced by centrifugal mixer and the amount of water is controlled by water injector and pulse generator, and EGR rate is controlled with 6-step control valve. The chamber pressure, fuel consumption and emissions are measured with various values of both EGR and water mixing rate, The results show that NOx emission is reduced much rather and smoke is also reduced simultaneously.

• 동력기계공학회지
• /
• 제8권1호
• /
• pp.18-23
• /
• 2004

The direct injection diesel engine is one of the most efficient thermal engines. For this reason DI diesel engines are widely used for heavy-duty applications. But the world is faced with very serious problems related to the air pollution due to the exhaust emissions of diesel engine. So, that is air pollution related to exhaust gas resulted from explosive combustion should be improved. Exhaust Gas Recirculation(EGR) is a proven method to reduce NOx emissions. In this study, the experiments-were performed at various engine loads while the EGR rates were set from 0% to 20%. The emissions trade-off and combustion of diesel engine are investigated. Hot and cooled EGR are achieved without cooling and with cooling respectively. It was found that the exhaust emissions with the EGR system resulted in a very large reduction in oxides of nitrogen at the expense of higher smoke emissions. Also, the reduction rates of NOx emissions for hot and cooled EGR are similar at load 20%.

• 한국공작기계학회논문집
• /
• 제12권6호
• /
• pp.104-111
• /
• 2003

In order to collect the engine performance data and determine optimum engine conditions, engine performance test based on interface unit were tested This paper was carried out that engine' performance was developed using interface unit between personal computer and diesel engine. The results of the study are summarized as follows: Interface unit was developed. By using PAL, simulation was carried in order to logic's inspection. From this tea NO$_{x}$ were decreased, otherwise PM were increased. By using EGR system PM were increased by twice in the high load ranges, it was not seen to come into effect in the low load ranges. This system was tested D-l3 mode, the results were decreased more than 50% in the NO$_{x}$ emission.

• Journal of Advanced Marine Engineering and Technology
• /
• 제26권6호
• /
• pp.679-687
• /
• 2002

In this study, a cycle simulation using a two-zone model is carried out to investigate the effect of intake charging conditions such as oxygen concentration, temperature and pressure on NO emissions in a DI diesel engine. The model is validated against measurements in terms of cylinder pressure, torque, BSFC and NOx emissions with 2902 cc DI diesel engine. Calculated results can be summarized as follows. The oxygen concentration in the intake charge is decreased with increasing of EGR rate and equivalence ratio. As the intake oxygen concentration is reduced, the combustion pressure and the burned gas temperature decrease and, as a result, NO formation decreases. Also, the results show that as the intake pressure increases and the intake temperature decreases, NO emissions are effectively reduced.

• Journal of Advanced Marine Engineering and Technology
• /
• 제37권4호
• /
• pp.308-315
• /
• 2013

물혼합 에멀젼 기술은 물의 급속한 분리에 의하여 불안정한 연소를 나타낸다. 이러한 문제점을 해결하기 위하여 많은 연구가 진행되고 있는데, 본 연구에서는 연료펌프입구까지 혼합연료를 순환시킴으로써 물의 분리를 최소화하는 하이브리드형 혼합장치의 성능을 분석하였다. 원통형 실험용 보일러에 버너를 부착하였으며 연료와 물의 유량을 조절하고 흡기유량을 제어하면서 배기농도와 화염온도를 계측하였다. 실험결과 배기농도와 화염온도를 유사하게 유지하는 경우 연료 소모율이 12% 저감되었으며, 흡기 유량과 디젤유 유량을 동일하게 유지하는 경우 질소산화물이 45.5%, 일산화탄소가 98.5% 스모크가 97.2% 감소하였다.

• 한국대기환경학회:학술대회논문집
• /
• 한국대기환경학회 2003년도 추계학술대회 논문집
• /
• pp.145-146
• /
• 2003

질소산화물은 천연가스, 석유, 석탄과 같은 화석연료 연소 시에 배출되는 대표적 오염물질로 산성비를 유발시키며, 오존, PAN, aldehyde와 같은 광화학 산화물을 형성하여 광화학 스모그를 유발한다. 따라서 NOx 제어의 필요성은 더욱 강조되고 있다. NOx 처리 공정 중 대표적인 SNCR(Selective Non-Catalytic Reduction)공정은 N-계열 시약(환원제)을 노내의 온도가 90$0^{\circ}C$에서 110$0^{\circ}C$인 구역으로 주입하여 NOx가 복잡한 단위반응들을 거쳐서 N2와 $H_2O$로 분해되는 저감기술의 하나로서 초기 설치비가 저렴하고 단기간에 쉽게 설치 가능한 기술이지만, 대부분 외국기술의 도입에 의존하고 있는 실정이므로 국내개발을 필요로 한다. (중략)

• 항공우주시스템공학회지
• /
• 제11권2호
• /
• pp.9-15
• /
• 2017

제올라이트 촉매를 이용한 에탄올의 연소 성능 향상 가능성과 질소산화물 및 일산화탄소 배출 특성을 검증하기 위해 촉매 반응 생성물, 에탄올, 케로신을 연료로 사용하여 마이크로 가스터빈 엔진 구동실험을 수행하고 그 결과를 비교하였다. 촉매 반응 생성물의 추력은 케로신의 추력보다 낮았으나 에탄올을 사용했을 때에 비해 평균적으로 5% 정도 향상되었다. 촉매 반응 생성물의 질소산화물과 일산화탄소 배출량은 전반적으로 케로신에 비해 매우 낮게 측정되었다. 결론적으로 제올라이트 촉매를 이용하여 에탄올을 개질하는 경우, 에탄올의 친환경성을 유지하면서 엔진성능을 개선할 수 있는 가능성을 확인하였다.