• Journal of IKEEE
• /
• v.24 no.4
• /
• pp.975-981
• /
• 2020

A 10 GHz LC voltage-controlled oscillator (VCO), which controls an amplitude of output signal, is proposed to improve the phase noise. The proposed amplitude control circuit for the LC VCO consists of a peak detector, an amplifier, and a current source. The peak detector is performed detecting the lowest voltage of the output signal by using two diode-connected NMOSFET and a capacitor. The proposed 10 GHz LC VCO with an amplitude control circuit for output signal is designed using a 55 nm CMOS process with a supply voltage of 1.2 V. Its area is 0.0785 ㎟. The amplitude control circuit used in the proposed LC VCO reduces the amplitude variation 242 mV generated in the output signal of the conventional LC VCO to 47 mV. Furthermore, it improves the peak-to-peak time jitter from 8.71 ps to 931 fs.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.14 no.5
• /
• pp.43-49
• /
• 2000

In this paper, a new control method is presented to reduce acoustic resonance phenomena of metal halide lamps with electronic ballasts. A behavior of frequency controlled resonant inverter is analyzed and the transfer function is obtained. An integrator as a current controller for ballast is employed. By using both a disturbance of the lamp power and spread spectrum effects for reducing acoustic resonance, an amplitude modulation is done by using the current controller with 200[Hz] sinusoidal wave. Arc stabilities of MH 250[W] lamps are studied with changing the modulation index. Experiments with two MH 250[W] lamps, made by different manufacturers, showed the validity of the proposed method.

• Journal of Satellite, Information and Communications
• /
• v.7 no.3
• /
• pp.135-139
• /
• 2012

A digital controller can simply realize a complex operation algorithm and power control process which can not be applied by an analog circuit for a solar array regulator(SAR). The digital resistive control(DRC) makes an equivalent input impedance of the SAR be resistive characteristic. The resistance of the solar array varies largely in a voltage source region and slightly in a current source region. Therefore when the solar array regulator is controlled by the DRC, the Advanced Incremental Conductance MPPT Algorithm with a Variable Step Size(AIC-MPPT-VSS) is suitable. The AIC-MPPT-VSS, however, using small signal resistance and large signal resistance of the solar array can not limit the absolute value of the solar array power. In this paper, the solar array power limiter is suggested and the BUCK-BOOST type SAR which is fully controlled by the digital controller is verified by simulation.

• Proceedings of the IEEK Conference
• /
• 2003.07c
• /
• pp.2485-2488
• /
• 2003

본 논문에서는 DSP를 이용하여 운동하는 물체의 회전량을 측정하는 실린더형 진동 자이로스코프(이하 자이로) 제어기를 개발하였다. 진동 자이로를 구동하기 위해서는 정밀 진동제어와 신호 처리와 같은 고급 제어 기술이 필요하다. 정밀진동제어는 진동 자이로를 구동하기 위해 필요한 핵심기술로써 기존의 PLL(phase-locked loop)방식은 외부환경에 민감하여 구현이 까다로울 뿐만 아니라 자이로 개개의 고유 진동수가 다르기 때문에 대량 생산에 어려움이 있었다. 또한 자이로 출력 신호로부터 회전량을 검출하기 위해서는 진폭과 당향성 검출의 본 회로뿐만 아니라 잡음 제거와 신호 증폭, 온도 보상과 같은 전처리 과정도 필요하다. 본 논문에서는 DSP를 통해 정밀 진동제어와 잡음 제거, 방향성 검출 등의 기능들을 구현하였으며 증폭과 진폭(회전량) 검출은 아날로그 회로를 이용하였다. 또 한 외부와의 인터페이스를 위해 D/A 회로를 설계하였고 이들을 실험을 통해 검증하였다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.36 no.7
• /
• pp.674-679
• /
• 2008

In this paper, we introduce a new design approach for self-sustained resonant accelerometer, that takes advantage of the automatic gain control (AGC) loop to achieve a stabilized oscillation dynamics. Fundamental idea of this accelerometer is to maintain uniform amplitude of oscillation under input accelerations. Through system modeling and loop transformation considering the envelope of oscillation, the controller is designed to maintain uniform amplitude in oscillation under dynamic input acceleration. The simulation results demonstrate the feasibility of the proposed accelerometer design, which is applicable to control grade inertial measurement system in industrial and civil application fields.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.4
• /
• pp.212-218
• /
• 2013

In this paper, a linear motor piston amplitude estimator using phase lag filter has been implemented. In order to control the cooling capability of a refrigerator or an air conditioner in which liner compressors are applied, the piston speed should be controlled. The piston speed control can be obtained by adjusting the frequency or the stroke of linear motors. The dynamic performance of linear compressors depends on how accurately the stroke or the piston amplitude is estimated. A linear motor piston amplitude estimator using phase lag filter is proposed and the superior performance of our estimator is verified via some simulation studies.

• Proceedings of the Korea Society for Simulation Conference
• /
• 1999.10a
• /
• pp.229-234
• /
• 1999

화력발전소 제어는 디지털 분산제어시스템에 의해서 이루어지고 보일러의 각종 프로세스는 대부분 PID제어기에 의해 제어되므로 PID제어기의 최적 조정은 보일러 프로세스의 안정적 운전에 가장 중요한 요소라고 볼 수 있다. 이러한 PID 제어기는 분산제어시스템 제작사에 따라 구현방법을 달리하고 있으므로 PID제어기의 최적조정을 위해서는 구현된 PID 제어기의 알고리즘을 이해하는 것이 필요하다. 본 논문에서는 먼저 화력발전소 보일러 디지털 분산제어시스템의 국산화 개발품에 채용된 PID제어기와 화력발전소에서 사용 중인 주요 외국 제작사별 PID제어기의 알고리즘에 대하여 기술한다. 임의의 모델링된 프로세스에 대하여 릴레이 피드백을 이용하여 임계진폭과 임계주기를 구하고 Ziegler-Nichols 주파수응답법을 이용하여 적합한 PID제어기 파라미터를 산출한 후 각각의 PID 제어기에 산출된 파라미터를 적용 시뮬레이션하여 PID 제어기들의 성능을 비교 분석하고자 한다.

• Journal of the Korean Society for Precision Engineering
• /
• v.12 no.9
• /
• pp.167-174
• /
• 1995

This paper experimentally demonstrates the feasibility of using shape memory alloy(SMA) actuators in controlling structural vibrations of a flexible cantilevered beam. The dynamic characteristics of the SMA actuator are identified and integrated with the beam dynamics. Three types of control schemes; constant amplitude controller(CAC), proportional amplitude controller (PAC) and sliding mode controller(SMC) are designed. The CAC and PAC are determined on the basis of physical phenomenon of the SMA actuator, while teh SMC is formulated in a mathematical manner. The proposed controllers are implemented and evaluated at various operating condirions by investigating the control level of suppression in transient vibration.

• The Journal of the Acoustical Society of Korea
• /
• v.18 no.5
• /
• pp.52-57
• /
• 1999

It is very important to design of QAM modulator of high spectral efficiency for high speed data transmission. In this paper, typical 16-QAM modulator is designed by modification design of DDFS(direct digital frequency synthesizer). DDFS generates sinusoidal waveform digitally to the frequency setting word. Phase modulation is accuratly made by control of a generated phase increment value and amplitude modulation is accomplished in the D/A converter output by control of amplitude level. For the suppression of harmonics and glitch, dual-structured DDFS is studied to improve the spurious characteristics. P-Spice is used for design and simulation in mixed mode. Also we can get the satisfactory results of designed 16-QAM modulator from the constellation output.

• Proceedings of the IEEK Conference
• /
• 2000.09a
• /
• pp.15-18
• /
• 2000

회전기에서 발생하는 소음성 잡음의 경우 능동잡음 제어를 이용 진폭이 상대적으로 큰 주기성 저주파 잡음 제어로 상당한 감쇄효과를 얻을 수 있다. 본 논문에서는 주기적 저주파 잡음을 효과적으로 제거하는 부밴드 능동잡음제어 구조를 제안하였다 이 구조에서는 QMF를 이용, 진폭이 큰 주기적 저주파신호를 분리하여 적응측엽제거 원리를 적용하여 저주파 신호를 제거한다. QMF에서 발생하는 지연은 각 필터를 통과한 신호경로에 적응필터를 사용하여 보상하였다. 그리고 적응필터 성능향상을 위해 최적 적응이득을 해석적으로 구하여 사용하였다.