• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1994.04b
• /
• pp.449-453
• /
• 1994

공작기계의 가공정밀도는 공구와 공작물간의 상대변위 크기로서 평가되는데, 이 상대변위는 가공중에 발생 하는 절삭력이 공구-척-주축-기계구조물-안내면-가공테이블-공작물로 이어지는 하중전달 폐곡선을 흐르면서 경로상의 정적, 동적 취약부의 주된 영향을 받아 생기거나 각 요소부품의 변형이 누적되어 생겨난다. 본 연구에서는 주축의 취약부를 규명하기 위하여 정적으로는 정적 처짐곡선을 이용하고, 동적으로는 진동모우드의 굽힘곡선을 이용하여 주축선단의 처짐에 가장 영향을 많이주는 부위를 파악하였다. 취약부의 개선방법으로는 주축지름을 변화시켜 주축선단 근처에서 굽힘이 집중되지 않도록 유도하였다. 그리고 구조개선의 효과를 확인 하기 위해서 기존 주축시스템과 개선 주축시스템의 정적, 동적 특성변화를 비교하였다.

• Geotechnical Engineering
• /
• v.11 no.3
• /
• pp.55-68
• /
• 1995

This paper is the analysis of the relationship between RQD and decay constant, blasting vi bration constant of cube root scaling and square root scaling, through experimental blast ins test in subway construction for excavation of shaft hole by bottom blasting. The magnitude of particle velocity is largely effected by the distance from blasting source, the maximum charge per delay and the properties of ground. In order to verify the effects of ground properties on blast-induced vibration, the relation-ship between magnitude of blasting vibration and Rock Quality Disignation which stands for joint property was studied. The results of test are verified that blasting vibration constant "K" and the absolute value("n") of decay constant relatively increse as RQD increased. According to the result, it can be predict the particle velocity by the blast -induced vibration in bottom blasting pattern.om blasting pattern.

• The Journal of the Acoustical Society of Korea
• /
• v.14 no.5
• /
• pp.83-88
• /
• 1995

The common practice for the identification of piezoelectric properties is based on the use of immittance of a resonator with a certain geometry and poling direction. In this paper, a new method is suggested to identify the complex-valued piezoelectric material constants. This method Is based on the minimization of differences between the analytical immittance and the experimental measurement of resonator. Non-linear minimization problems are formulated to find out the unknown properties relevant to the resonators. The immittance data used for identification are measured at a number of frequencies which cover the vicinity of resonance frequency and the low frequency region. To illustrate the proposed technique, the complex-valued coefficients are identified for a typical PZT4 ceramic composition.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2009.10a
• /
• pp.623-624
• /
• 2009

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2009.10a
• /
• pp.229-230
• /
• 2009

A method is suggested for the noise source identification using the sound intensity method. The suggested method does not need to install the grid using wire or thread during the sound intensity measurement for the noise source identification. It utilizes a camera to show the grid on the screen not installing the real grid for the sound intensity method.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2010.10a
• /
• pp.399-400
• /
• 2010

• Journal of KSNVE
• /
• v.4 no.3
• /
• pp.327-335
• /
• 1994

In this paper, to identify the dynamic characteristics of antenna system, the antenna is divided into 4 components and those were analyzed with a conventional FEM package MSC/NASTRAN. Using a Component Mode Synthesis Method, dynamic characteristics of total system is also identified. The Coherence of each component to total system is evaluated by using strain and kinetic component to total system is evaluated by using strain and kinetic energy. The improving strategy of dynamic characteristics is suggested by changing mass and stiffness of large coherence components.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2008.11a
• /
• pp.650-651
• /
• 2008

In this thesis, source identification tool for NI-PXI equipment is developed with LabVEIW. For the purpose of examining propriety of developed tool, simulation is performed with several signals that have different frequency range. After checking the coherence functions for concerned frequency domain, an experiment is conducted on an evaporator that cause the principal noise of a refrigerator.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1998.04a
• /
• pp.722-727
• /
• 1998

본 연구는 도시 인근발전소의 소음 유발 기기에 의한 환경소음의 실제적인 기여도를 평가하고 더욱 쾌적한 환경조성방안을 도출하기 위하여 수행되었다. 발전소 경계의 수음자소음을 기초로 각종 기기의 주파수 분석을 통하여 소음 유발 기기를 규명하고 소음원의 주 주파수 및 크기를 구하였다. 소음원의 전파경로를 파악하기 위해 소음레벨의 분포도를 구하였으며, 측정치와도 잘 일치함을 보여주었다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2014.04a
• /
• pp.482-484
• /
• 2014

국내의 슬라브도상, 자갈도상의 소음현안에 부합하여 소음저감설계 및 저감장치와 저감구조를 개바할 수 있는 합리적인 소음계산 및 영향인자 규명 모델을 현 모델과 더불어 발전시키고자 하며, 그의 한 예로 고속철도의 통과소음 측정 및 분석결과와 소음원 기여도 기술을 이용한 분석결과를 통하여 레일소음의 특성을 고찰하였다.