• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.8 no.4
• /
• pp.17-21
• /
• 1994

레이저 광원을 사용하여 정현적으로 극미세 진동하는 압전소자에 부착된 거울을 대상으로 마이켈슨 간섭계로 부터의 간섭신호를 감지해 변위의 크기와 주파수를 측정할 수 있는 진동측정 방법과 장치를 제시한다. 약 80[nm]~1.2[$\mu\textrm{m}$] 범위의 진폭을 가진 물체의 변위와 주파수를 매우 높은 정밀도로 측정하고, 빔의 파장보다 큰 진동물의 간섭신호를 컴퓨터로 처리하여 진동형태의 개형을 구해다.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1998.05b
• /
• pp.921-926
• /
• 1998

CANFLEX 연료봉 다발의 3000 시간 내구성 시험 기간 동안 속도센서를 사용하여 압력관 내부에 장전된 연료봉 다발의 진동을 측정하였다. 압력관 내부에 장전된 연료봉의 진동측정은 고온, 고압, 그리고 공간적 제약 때문에 가속도계나 스트레인 게이지 같은 접촉센서로는 측정할 수 없다. 비접촉 센서를 사용하면 이러한 난점을 해결하고 압력관 내부에 장전된 연료봉 다발의 진동을 측정할 수 있다. 속도센서는 비접촉 센서로서 가우스(gauss)의 크기를 감지하여 전압을 출력하는 센서이지만, 측정거리, 주파수, 그리고 속도와 가우스가 비선형이기 때문에 교정을 한 후에 사용하여야 한다. 본 본문에는 속도센서의 교정방법과 압력관 내부에 고온, 고압의 유체가 흐를 때 발생하는 연료봉 다발의 진동특성을 구하였다.

• 한국HCI학회:학술대회논문집
• /
• 2008.02a
• /
• pp.553-558
• /
• 2008

In this paper, we develop a vibration system which can generate diverse vibration effects in realtime by analyzing signals from the sound output of PC. This system is able to detect the occurrences of particular sounds in order to generate corresponding pre-programmed vibration patterns. It contributes to the improvement of the reality and the immersiveness of games and virtual reality applications. In addition, its advantage is to easily add vibration features to applications which were originally developed without consideration for vibration. Our system consists of an external DSP board for signal processing and a vibration pad which can be put on wrists. It is superior to other sound-driven vibration devices because its DSP board can detect more diverse sounds, has higher performance and does not interfere with PC. Also the wrist-wearable vibration pad is able to generate more realistic vibration than other mouse or joystick type devices.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.10a
• /
• pp.664-665
• /
• 2015

최근 IT기술이 점점 발달함에 따라 장애인의 일상생활을 편리하게 하는 도구들이 속속 개발되고 있다. 본 연구에서는 시각장애인들이 색상판별을 진동을 통해 감지할 수 있는 시스템을 개발하였다. 이것은 최근 대중화되고 있는 사물인터넷(IoT)의 기반이 되는 아두이노 기술을 접목하여 다양한 스위치와 센서로 입력 값을 받아들여 LED, 모터와 같은 외부출력장치를 제어함으로써 상호 작용을 만들어 낼 수 있는 시스템이다. 구체적으로 제안하는 시스템은 컬러센서를 통해 색상을 감지하고 색상 값을 수치 값으로 읽어 들이고 수치 값에 진동의 세기 주기 등을 달리함으로 시각장애인이 색상을 판별할 수 있도록 되어있다.

• Journal of Preventive Medicine and Public Health
• /
• v.24 no.1 s.33
• /
• pp.93-97
• /
• 1991

The time honoured tuning fork at present widely available for examining vibration sensation is brought about the problem of great interobserver variation. To resolve t his problem, author developed a divice using electric magnet that stimulates constantly tuning fork. The perception time of vibration from tunung fork by this device was tested on the index finger of dominant hand of twenty eight subjects. It was 12.44 seconds on average and ranged from 9.47 to 17.25. Coefficient of variation of it was 16.89 percent. Correlation coefficient between test and retest after 30 minutes was 0.957(p<0.01). This device is portable. Test procedure in non-invasive, non-aversive and simple, can be performed within one minute, and does not require the skilled technician. It is felt that this device testing vibration perception time is suitable as screening tool for early detection of occupational peripheral neuropathy.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.12 no.2
• /
• pp.361-366
• /
• 2017

The abnormal state of the main equipment across the industry is accompanied by abnormal rise of temperature, change in the vibration and noise. In this study, we developed a smart sensing module equipped with BLE, and developed a smart sensing device that can detect abnormal vibration due to its own flaws of the equipment by interfacing with an MEMS-based acceleration sensor. The smart sensing device developed in this study can be easily installed in a small space and can monitor the vibration status of the equipment in real time, and can easily inform the user of the steady state and the problem occurrence status with array LED display.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.11 no.2
• /
• pp.59-66
• /
• 2011

In this study, the vibration serviceability of pedestrian by travelling vehicles on the cable-stayed bridge with concrete tower was studied. Experiment variables were considered travelling speed of vehicles, pavement state of asphalt on the deck and weight of vehicles, preferentially. Especially, pavement grade states were considered by A and C grades by BMS (Bridge Management System) standard. The incremental ratio extent of vibration acceleration responses, asphalt pavement grade C over A, was construed to 1.23~1.43. Only, these results are valid within extent of the Scaled-Weight 228.0~1161.9 km/h kN. The vibration equations for acceleration responses prediction of bridge deck were proposed into three types, reliability 50%, 90%, 95% respectively. These equations can consider asphalt pavement grade, and the vehicle's weight and travelling velocity, which are the source of vibration, are combined into the term called, 'Scaled Weight'.

• Computational Structural Engineering
• /
• v.10 no.3
• /
• pp.157-165
• /
• 1997

This research aims to develop an algorithm of optimal transducer placement for health monitoring of large structural system. The structural vibration response-based health monitoring is considered one of the best for the system which requires a long-term, continuous monitoring. In its experimental modal testing, however, it is difficult to decide on the measurement locations and their number, especially for complex structures, which have a major influence on the quality of the results. In order to minimize the number of sensing operations and optimize the transducer location while maximizing the accuracy of results, this paper discusses about an optimum transducer placement criterion suitable for the identification of structural damage for continuous health monitoring. As a criterion algorithm, it proposes the Kinetic Energy Optimization Technique (EOT), and then addresses the numerical issues which are subsequently applicable to actual experiment where a bridge model is used. By using the experimental data, it compares the EOT with the EIM(Effective Indefence Method) which is generally used to optimize the transducer placement for the damage identification and control purposes. The comparison conclusively shows that the EOT algorithm proposed in this paper is preferable when a structure is to be instrumented with fewer sensors for monitoring purpose.

• Journal of the Korean Institute of Gas
• /
• v.4 no.1 s.9
• /
• pp.1-8
• /
• 2000

Third party damage is one of the causes intrimiting the safety of a buried pipelines and it is very important to detect third party damage on pipelines as soon as possible. The purpose of this study is whether third-party damage can be detected by accelerometer sensor and how far the third-party damage signal can propagate. And a pilot experiment was carried out in order to find third-party damage location. As a result, the detected signal's spectum is high frequency at short distances, as the distance is far, the signals in high frequency range are attenuated and those in low frequency range remain. It was also proved that third-party damage within 5.3km distance can be detected by monitoring vibration signals.

• Journal of Internet Computing and Services
• /
• v.24 no.2
• /
• pp.37-45
• /
• 2023

In line with the 4th Industrial Revolution, facility maintenance technologies for building smart factories are receiving attention and are being advanced. In addition, technology is being applied to smart farms and smart fisheries following smart factories. Among them, in the case of a recirculating aquaculture system, there is a motor pump that circulates water for a stable quality environment in the tank. Motor pump maintenance activities for recirculating aquaculture system are carried out based on preventive maintenance and data obtained from vibration sensor. Preventive maintenance cannot cope with abnormalities that occur before prior planning, and vibration sensors are affected by the external environment. This paper proposes an anomaly detection algorithm that utilizes ADTK, a Python open source, for motor pump anomaly detection based on data collected through current sensors that are less affected by the external environment than noise, temperature and vibration sensors.