• 제목/요약/키워드: 진동안전기준

Search Result 122, Processing Time 0.024 seconds

화약산업의 발파안전 대책 - 소음진동 및 안전거리 설정을 중심으로 -

  • 안명석
    • Journal of KSNVE
    • /
    • v.2 no.1
    • /
    • pp.15-20
    • /
    • 1992
  • (1) 화약발파작업을 시작하기 전에는 필히 시험발파, 안전진단을 통해 공해 및 안전사고 발생요소들을 면밀히 분석하고 파악하여 발파공법, 천공공법, 사용폭약 의 종류, 사용약량 등을 결정하고 이에 따른 적합한 안전거리의 설정, 안전덮게, 안전망의 사용, 필요시 휀스철망 설치등의 안전조치를 완벽히 취해야겠다. 또한 현행 소음진동규제법에 의하면 폭약 사용시 7일전 신고의무 규정을 우리나라의 공사 현실을 감안해 볼 재검토 할 필요가 있다. (2) 선진국의 발파진동 기준을 우리나라 의 경우와 비교 분석해 볼때 우리나라의 경우 발파진동 안전기준은 도심지에는 대체 로 0.5cm/sec가 적당하고 고주택, 아파트 등이 밀집된 지역이나 건물지반이 특히 약한 곳은 0.2cm/sec을 적용함이 타당하다고 판단된다. 또한 도심지에서의 안전발파 를 위한 터널공법으로는 주변 생활환경 소음진동방지를 위한 심발법으로 브이 컷법 을, 여굴방지와 미려시공 등 공사시 안전사고, 소음진동을 방지하기 위한 공법으로는 슬러리, 파이 넥스 폭약을 이용한 정밀면 발파법을 권장한다. (3) 연화발사시 안전 거리를 3.deg. 기준 최소반경 129m, 12" 기준 최고 반경 200m로 설정하여야 겠다. 또한 연화발사시 발생하는 폭발 소음은 80 - 100dB 정도로써 대량으로 장시간 발사 시는 청력장해 등의 피해가 발생할 수 있으나 우리나라의 경우는 발사 총 시간이 대체로 30분을 초과하지 않으므로 관람자나 일반인들이 소음피해를 호소할 수준은 아니라고 결론지을 수 있다.수 있다.

  • PDF

A Study of the Vibration Safety Criterion on the Dynamic Behavior of Buried Pipeline with the Free Ends (양단자유 경계조건을 가진 매설관의 동적거동에서 진동안전 기준에 관한 연구)

  • 이병길;정진호;장봉현;안명석
    • Explosives and Blasting
    • /
    • v.22 no.3
    • /
    • pp.13-26
    • /
    • 2004
  • This work reports results of our study on the dynamic response of buried pipelines depending on their boundary conditions. We have studied behavior of the buried pipelines both along the axial and the transverse direction with a boundary condition of free ends. The buried pipelines are modeled as beams on elastic foundation while the seismic wave as a ground displacement in the form of a sinusoidal wave. The natural frequency, its mode, and the effect of parameters have been interpreted in terms of the free vibration. In order to investigate the response on the earthquake, the resulting frequency and the mode shape obtained from the free vibration have been utilized to derive the mathematical formula for the farced vibration. We have also completed the computer program to simulate the time-displacement graphs of the pipe lines with free ends for both cases of vibrations.

Estimation of Stiffness Limit for Railway Bridge Vibration Serviceability (진동사용성을 고려한 철도교량구조물의 강성한계 분석)

  • Jeon, Bub-Gyu;Kim, Nam-Sik;Kim, Sung-Il
    • Journal of the Korean Society for Railway
    • /
    • v.11 no.5
    • /
    • pp.489-498
    • /
    • 2008
  • In general, deflection limit criteria of bridge design specifications have been considered based on static serviceability and structural stability. Dynamic serviceability induced from bridge vibration actually has not been included in the criteria. Thus, it is necessary for deflection limit to be considered in order to check dynamic service- ability on bridge vibration. In this study, The allowable displacement of Korea Railway Bridge Design Specifications is compared to the frequency domain comfort limit and analyzed france code and japanese code. Korea Railway Bridge Design Specifications is regulated based on the train speed. Such is because the vibration time duration is partly considered. but this criteria is not satisfied with comfort limit. and, it is estimated to be capable to provide deflection limit considering dynamic serviceability. In order to evaluate the dynamic serviceability of various types of railway bridges in current public were selected and their dynamic signals were measured. and the result of the bridge-train interaction analysis according to the changes in bridge stiffness was compared to the comfort limit to suggest the stiff-ness limit to the dynamic serviceability, which should conveniently be applied at the field.

Effect of Ground Vibration on Surface Structures and Human Environments -Application of Blasting Vibration to Induced Seismicity in EGS Hydraulic Stimulation- (지반진동이 지상구조물 및 환경에 미치는 영향평가 -발파진동 사례를 통한 EGS 수리자극에의 활용-)

  • Lee, Chung-In;Min, Ki-Bok
    • Tunnel and Underground Space
    • /
    • v.23 no.6
    • /
    • pp.521-537
    • /
    • 2013
  • While microseismicity induced by hydraulic stimulation carried out for EGS is useful means in estimating the range of permeability increase, it also affect surface structures and environments. In order to establish a mitigation plan for microseismicity triggered by hydraulic stimulation, we reviewed world-wide guidelines on the impact of ground vibration on the surface structure and human environment by blasting. Case studies from Europe and USA on the microseismicity by hydraulic stimulation are presented and suggestions are made for the guidelines on ground vibration by hydraulic stimulation for the ongoing Pohang EGS project.

Consideration on the Relation between Vibration Level and Peak Particle Velocity in Regulation of Ground Vibration (지반진동 규제기준에서 진동레벨과 진동속도의 상호관계에 대한 고찰)

  • Choi, Byung-Hee;Ryu, Chang-Ha
    • Explosives and Blasting
    • /
    • v.30 no.2
    • /
    • pp.1-8
    • /
    • 2012
  • The only law related to airblast and ground vibration control in Korea is the Noise and Vibration Control Act enforced by the Ministry of Environment. But this law mainly deals with the annoyance aspects of noises and vibrations in ordinary human life. Hence, the law defines the safety criteria of ground vibration as the vibration level (VL) of dB(V) unit. The ground vibrations produced from blasting, however, have the unique characteristics that can be shown in shock vibrations, and the duration is also very short compared to the vibrations from machinery, tools or facilities. Hence, vibration regulations for blasting operations usually define the safety criterion as the peak particle velocity (PPV) considering the effect of ground vibrations to structural damage. Notwithstanding, there are several attempts that predict VL from PPV or estimate VL based on the scaled distances (SD; in unit of $m/kg^{1/2}$ or $m/kg^{1/3}$) without considering their frequency spectra. It appears that these attempts are conducted mainly for the purpose of satisfying the law in blasting contracts. But, in principle there could no correlation between peaks of velocity and acceleration over entire frequency spectrum. Therefore, such correlations or estimations should be conducted only for the waves with the same or very similar frequency spectra.

A Study of the Safe Measure on the Gun Powder Industries (화약산업의 발파 안전대책 -소음진동 및 안전거리 설정을 중심으로-)

  • 안명석
    • Journal of the Korean Society of Safety
    • /
    • v.6 no.4
    • /
    • pp.98-104
    • /
    • 1991
  • 본 연구는 국내외 문헌과 현장 데이타를 기준으로 하여 일부 외국 기술 자료를 인용 하여 정리 하였으며, 岩盤發破現場에서의 폭발사고에 대하여는 RION VM- l2B, LR-04Recoder등 소음·진동계를 이용한 안전진단 결과를 토대로 騷音振動에 따른 被害 및 防止對策을 위주로 기술하였고, 煙火發射現場에서의 一般安全守則과 Portable Sound Level-meter를 이용한 폭음측정 결과를 토대로 한 爆發騷音 및 Transite를 사용한 측정치를 정리하여 落下安定踞離 設定에 대하여 기술하였다.

  • PDF

진동 및 충격 환경에서 GPS 수신기의 동작 특성

  • Gwon, Byeong-Mun;Mun, Ji-Hyeon;Choe, Hyeong-Don
    • Proceedings of the Korean Institute of Navigation and Port Research Conference
    • /
    • v.2
    • /
    • pp.419-422
    • /
    • 2006
  • 위성발사체와 같이 극환 환경에서 사용되는 전자 탑재물들은 진동이나 충격이 가해질 때 정상적으로 동작하지 못하는 경우가 많다. 그러므로 위성발사체에 탑재되는 모든 탑재물들은 발사전에 지상에서 다양한 환경시험을 통하여 그 성능을 검증해야 한다. 기준 클럭을 사용하여 항법해를 계산해야 하는 GPS 수신기는 특히 다른 전자 탑재물 보다 클럭의 안정도에 더 많은 영향을 받으므로 극한 진동 및 충격 환경에서 다양한 문제들이 나타난다. 본 논문에서는 위성발사체의 비행안전용으로 개발된 GPS 수신기의 진동 및 충격 환경시험 결과를 바탕으로 그러한 환경에서 기준 클럭이 영향을 받아 나타나는 다양한 동작특성을 설명하고, 기준 클럭의 중요성과 진동 및 충격 환경시험에서의 유의사항 및 문제 해결 방법에 대하여 설명한다.

  • PDF

해상 부유체의 진동 분석을 위한 AR-ARX 모델링에 관한 연구

  • Im, Jeong-Bin;Yang, Won-Jae;Kim, Jong-Ho;Lee, Dong-Ju
    • Proceedings of the Korean Institute of Navigation and Port Research Conference
    • /
    • 2012.06a
    • /
    • pp.157-159
    • /
    • 2012
  • 바람이나 파도에 의해서 해상 부유체의 진동이 발생하는데, 이러한 진동은 부유체와 부유체에 접안시킨 이동체 사이에 접촉을 야기하기 때문에 부유체나 이동체에 손상이 발생한다. 이 논문에서는 AR(Autoregressive) 모델과 ARX(AR with eXogenous) 모델을 이용하여 부유체에 발생하는 진동 모델링에 관해서 기술한다. 연구 방법은, 기준 잡음신호를 생성하여 기준 모델 계수를 구하고, 모의 충격신호를 생성하여 충격 모델 계수를 구한 후, 충격 신호만을 추출하여 가해진 충격의 정도를 분석 평가하였다. 본 연구는 향후 요트와 요트계류장의 안전확보 시스템 개발을 위한 기초 연구로 활용할 예정이다.

  • PDF

Establishment of Korea Gas Safety Standards for Hydrogen Appliance Inspection in Accordance with Hydrogen Law (수소법에 따른 수소용품 검사시행에 대비한 기술기준 제정)

  • Jung, Jae-Hwan;Kim, Wan-Jin
    • Journal of the Korean Institute of Gas
    • /
    • v.25 no.6
    • /
    • pp.80-84
    • /
    • 2021
  • As the Hydrogen law was enacted, 4 types of hydrogen appliances were designated as inspection products. The types of hydrogen appliances are water electrolysis equipment, hydrogen extraction equipment, stationary fuel cells, and mobile fuel cells. The establishment fo safety standards for hydrogen appliance inspection defines risk factors for each hydrogen appliance and stipulates safety standards to prevent risk factors. The main safety standards for each hydrogen appliance are hydrogen quality and safety control for water electrolysis, toxic substances emission prevention and carbon monoxide emission prevention for hydrogen extraction facilities, vibration safety for mobile fuel cells.

A Study on the Safe Blast Design to Increase Slope Stability (발파진동이 사면에 미치는 영향과 안전설계에 관한 연구)

  • 안명석;류창하;박종남;권중남
    • Explosives and Blasting
    • /
    • v.19 no.1
    • /
    • pp.85-92
    • /
    • 2001
  • 본 논문에서는 암굴착시 발파에 의한 암반사면의 균열방지 및 사면안정 재고를 위하여 대 구-포항간 고속도로 건설현장에서 시험발파를 실시하고 그 결과를 분석하여 천공깊이별 안전 발파패턴을 제시하였다. 또한 현지 탄성파 속도를 측정하여 발파에 의해 암반에 미치는 균열상태를 조사한 결과 탄성파속도의 감소가 40 ∼ 53%로서 암반 중에 균열을 발생시킨 것으로 나타났다. 발파진동 계측결과를 분석하여 암반에 균열을 일으킬 수 있는 진동속도 기준을 설정하여 균열권 범위를 추정하였으며 사면의 기하학적 형상을 고려하여 손상대를 최소화 할 수 있는 적정 안전설계 패턴을 제시하였다.

  • PDF