• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2001.11a
• /
• pp.179-184
• /
• 2001

대부분의 제품 생산 시에는 시제품을 제작하여 이에 대한 성능 심사를 통해 미비한 부분을 보완하기 위한 재설계 작업과정을 필요로 한다. 설계 작업에 가장 중요한 부분인 특정 설계 변수에 대한 민감도의 파악은 설계 작업의 핵심적인 역할을 하고 있다. 대개의 경우 진동설계를 위한 설계변수로 구조물의 단위면적, 길이, 재료의 성질과 같은 물리적인 변수를 많이 활용하고 있으며 이러한 변수들에 대한 민감도 해석 기법들은 이미 많은 연구를 통해 실용화되고 있다. 그러나 이러한 변수만으로는 주어진 조건을 만족하도록 설계하기가 어려운 경우가 있다. 이런 경우는 부가구조물을 첨가하여 저진동 설계조건을 만족하는 구조물을 제작하는 것이 보편적이다. 한편, 구조물의 최적화 과정에서 고유진동수를 고려해야 하는 경우가 많다. 저주파 영역의 문제에서는 첫번째 고유진동수가 구조물의 진동량에 관계되는 중요한 요인이 되고, 또한 공진에 의한 문제가 발생했을 경우에는 고유진동수를 옮겨서 공진을 회피할 수 있기 때문이다. 본 연구에서는 에어컨 실외기의 진동을 저감하고 그로 인한 구조기인 소음을 저감하기 위하여 음압 레벨을 바탕으로 정한 관심 주파수 영역에 고유진동수가 존재하지 않도록 부가구조물을 최적화하였다. 최적화에 필요한 민감도는 신뢰성 있는 유한요소 모델을 구성하는 것이 쉽지 않으므로 실험으로 구한 주파수 응답함수를 이용하였다.

• Computational Structural Engineering
• /
• v.9 no.4
• /
• pp.117-126
• /
• 1996

Damage detection methods using structural tests can be divided into two methods, i.e., static and dynamic. The static methods which use the stiffness properties of the structure are simpler than the dynamic methods. However, static approaches are very sensitive to the displacement measurement noises and modeling errors. The dynamic methods also have limitations in acquiring the natural frequencies and mode shapes of the high frequencies. In this study, a method for the structural damage assessment using sensitivity matrices is developed, in which the drawbacks of the static and dynamic methods can be compensated. Based on the measurement data for the static displacements and dynamic modal properties, the damage locations and the degree of damage are determined using the presented sensitivity matrix method. The efficiency of the proposed method has been examined through numerical simulation studies on truss type structures.

• Journal of the Society of Naval Architects of Korea
• /
• v.29 no.2
• /
• pp.140-149
• /
• 1992

The new method, termed the substructural eigensensitivity synthesis method, utilizes the computational merits of the component mode synthesis technique and of sensitivity analysis for the design sensitivities of the dynamic characteristics of substructurally combined structures. It is shown that the eigensensitivities of the entire structure can be obtained by synthesizing the substructural eigensolution and the sensitivities of the eigensolution for the design variables of the modifiable substructure. The sensitivities of the eigenvalues and eigenvectors obtained by the new method are compared to exact eigensolutions in terms of accuracy and computational efficiency. The small errors in eigensensitivity due to the truncation of higher modes remain within a manageable and permissible range for further analysis. The advantage of the newly proposed method as compared to the direct application of sensitivity analysis of the whole structure is demonstrated through examples.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1998.05b
• /
• pp.909-914
• /
• 1998

제어봉구동장치는 원자력발전소에서 사용되는 기기로서, 가늘고 긴 수직 외팔보의 형상을 하고 있어 지진과 같은 동적하중에 취약한 구조를 갖고 있다. 따라서 발전소가 건설되는 지반의 다양한 지진하중에 대한 동적해석이 중요한 설계요건으로 되어 있다. 본 논문에서는 제어봉구동장치의 고유진동수를 제어하기 위한 기초연구로써 제어봉구동장치의 설계변경이 동적특성에 미치는 영향, 즉 고유진동수에 대한 설계 민감도 해석을 수행하였다. 해석 방법으로는 유한요소 프로그램의 구조 해석 결과에 변분법을 이용한 설계 민감도법을 사용하였다. 해석 결과는 유한차분에의한 결과와 일치함을 보였고, 제어봉구동장치의 초기설계 단계에서 유용한 정보로 활용할 수 있음을 확인하였다. 또한 이러한 결과는 최적설계 프로그램등과 연계되어 구조물의 설계 개선에 많은 도움을 줄 것으로 판단된다.

• Computational Structural Engineering
• /
• v.7 no.1
• /
• pp.91-98
• /
• 1994

Design sensitivity analysis method for the vibration of vehicle structure is developed using adjoint variable method. A variational approach with complex response method is used to derive sensitivity expression. To evaluate sensitivity, FEM analysis of ship deck and vehicle structure are performed using MSC/NASTRAN installed in the super computer CRAY2S, and sensitivity computation is performed by PC. The accuracy of sensitivity is verified by the results of finite difference method. When compared to structural analysis time on CRAY2S, sensitivity computation is remarkably economical. The sensitivity of vehicle frame can be used to reduce the vibration responses such as displacement and acceleration of vehicle.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1995.04a
• /
• pp.287-291
• /
• 1995

다구찌 방법을 이용하여 안정거울 시스템의 민감도 해석, 강건설계 및 공차설계를 행하였다. 민감도 해석을 통해 안정거울 시스템의 안정화 성능에 크게 영향을 미치는 7개의 중요한 설계변수를 도출하였다. $m_{M}$이 안정화 성능에 가장 크게 영향을 주므로 공차범위를 줄여야 한다. $m_{M}$, $m_{B}$, $K_{MB}$ , $p_{3}$, $b_{3}$는 공차범위가 크게 안정화 성능에 영향을 미치지 못함을 알 수 있다. 기타의 변수들은 각각 하한공차 및 상한공차로 주어진다.

• Journal of the Korean Society for Precision Engineering
• /
• v.20 no.2
• /
• pp.209-217
• /
• 2003

In this paper, the dynamic system modeling and the state sensitivity analysis of the spin-coater system are proposed for the reduction of the vibration. In the respect of modeling, the spin-coater system is considered to be composed of servomotor, spindle, supporting base and so on. Each component of model is combined and derived to 3 dimensional equations. The combined model is verified by experimental values of actual system in the frequency domain. By direct differentiation of the constraint equations with respect to kinematic design variables, such as eccentricity of spindle, moment of inertia, rotational stiffness and damping of supported base, sensitivity equations are derived to the verified state equations. Sensitivity of design variables could be used for vibration reduction and natural frequency shift in the frequency domain. Finally, dominant design variables are selected from the sensitivity analysis.

• Journal of the Microelectronics and Packaging Society
• /
• v.31 no.1
• /
• pp.1-6
• /
• 2024

Spiders detect even tiny vibrations through their vibrational sensory organs. Leveraging their exceptional vibration sensing abilities, they can detect vibrations caused by prey or predators to plan attacks or perceive threats, utilizing them for survival. This paper introduces a nanoscale crack-based sensor mimicking the spider's sensory organ. Inspired by the slit sensory organ used by spiders to detect vibrations, the sensor with the cracks detects vibrations and pressure with high sensitivity. By controlling the depth of these cracks, they developed a sensor capable of detecting external mechanical signals with remarkable sensitivity. This sensor achieves a gauge factor of 16,000 at 2% strain with an applied tensile stress of 10 N. With high signal-to-noise ratio, it accurately recognizes desired vibrations, as confirmed through various evaluations of external force and biological signals (speech pattern, heart rate, etc.). This underscores the potential of utilizing biomimetic technology for the development of new sensors and their application across diverse industrial fields.

• Journal of Power System Engineering
• /
• v.16 no.2
• /
• pp.11-16
• /
• 2012

In this paper, the authors formulate the sensitivity analysis algorithm for the natural frequency of a torsional shafting by expanding the transfer stiffness coefficient method. The basic concept of the present algorithm is based on the transfer of sensitivity stiffness coefficient, which is the derivative of stiffness coefficient with respect to design parameter, at every node from the first node to the last node in analytical model. The effectiveness of the present algorithm is confirmed by comparing the results of the sensitivity analysis and those of the reanalysis for the natural frequencies of a torsional shafting with a constant cross section. In numerical calculation, the design parameter is the diameter of the shaft element of the torsional shafting.

• Journal of Korean Society of Steel Construction
• /
• v.10 no.2 s.35
• /
• pp.279-290
• /
• 1998

An existing Damage Index Method is verified to demonstrate its feasibility for detecting structural damage in truss bridges (1) for which modal parameters are available for a few modes of vibration and (2) for which baseline modal information is not available from its as-built state. The theory of approach to detect locations of damage and to identify baseline modal model is summarized on the basis of system identification theory and modal sensitivity theory. The feasibility of the Damage Index Method is demonstrated using a numerical example of a truss bridge with 11 subsystems of 211 members and for which only two modes of vibration were recorded for post-damaged state.