• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.10
• /
• pp.296-302
• /
• 2019

In this study, a basic durability assessment was performed by selecting the main part of a trial product of a shale shaker, which is one of components for a mud circular system. For a preliminary durability assessment, it was assumed that the lifetime of the bearing for the vibrator motor and the stiffness of the support spring are affected by the vibration when the motor operates continuously. In the case of the motor, the initial p-p level was 0.72 g, but after 100 hours of operation, the p-p level was rapidly increased to 1.26 g. Bearing defects could be estimated through ball defect frequency analysis. In the case of the spring, the stiffness of the spring was reduced by approximately 3.78% at the end of 2,000 hours of the fatigue-durability test by applying excitation conditions to shale shaker body. In the future, we will analyze the influence of the particle removal efficiency of the shale shaker.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.11a
• /
• pp.840-845
• /
• 2004

Development of the linear motors is recently required to control a high-speed and high-resolution in the high-integrated and speed process industry. This paper presents vibration analyses as well as measurement standards of the newly developed linear motors through analyzing the vibration characteristics of the advanced products. Vibration experiments are conducted for identifying vibration level during operation. They are also included in the modal test to analyze dynamic characteristics. Analytic data using Finite Element Method (FEM) are compared with the results of the modal. The FEM and experiments make it possible to understand these characteristics. Further, through computer simulation for the behavior of moving part to be vibration source, the best acceleration pattern of moving part movement can be verified to achieve effective moving part positioning and reduce the vibration due to moving part movement.

• Journal of rehabilitation welfare engineering & assistive technology
• /
• v.8 no.1
• /
• pp.1-7
• /
• 2014

In this study, the effect of the automotive haptic-seat technology which can transmit the driving information by the vibro-stimulus from the seat was investigated to overcome previous system's limitation relied on the visual and audial method and to help handicap driving. A prototype haptic seat covers with 30 coin-type motors and driver module were developed for this sake. A driving simulator on the 6-DOF motion-base was used for driving situation and we executed the seat vibro-stimulus test with 10 young participants who have normal tactile sense. The haptic recognition ratio by 30 locations was measured and analyzed in the result. The intensity of vibro-stimulus was adjusted by input voltage of motors (1.5V,2.5V,3.5V). All vibro-stimulus locations at 2.5V and 3.5V could be recognized by all participants and even in the lowest recognition ratio of 1.5V. The results showed that the seat vibration stimulus could be useful to transfer the drivers' information while driving.

• Proceedings of the KIPE Conference
• /
• 2011.07a
• /
• pp.202-203
• /
• 2011

본 논문에서는 자동차가 전기모터로 주행하다가 배터리가 방전되면 엔진으로 구동할 수 있도록 연결해 주는 클러치 시스템에 적용된 BLDC 모터의 위치제어기를 제안한다. 클러치 시스템에 사용되는 BLDC 모터의 구동은 Hall 센서로부터 검출된 회전자 위치정보를 이용하여 위치제어를 수행하였다. PHEV 시스템에서는 클러치를 엔진과 전기모터로 연결해야 하므로 정확하고 빠른 위치제어를 위해 위치제어기를 적용하였고, 클러치 연결 시 진동을 최소화하기 위해 속도제어기를 사용하여 엔진의 속도와 클러치 모터의 속도를 동기가 되도록 하였다. 또한 위치제어를 하기 전에 클러치의 초기위치를 맞춰 줘야 하므로 모터의 위치정보를 이용하여 속도제어기와 전류제어기로 모터를 일정한 위치로 이동시켰다. BLDC 모터의 전압제어를 위한 PWM 방법은 기존의 바이폴라 PWM 보다 전류리플이 적은 유니폴라 효과를 내는 새로운 바이폴라 PWM 방법을 사용하였다. 제안된 알고리즘은 시뮬레이션과 실험을 통해 검증하였다.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.18 no.2
• /
• pp.115-124
• /
• 2004

This paper suggested the vibration characteristic improvement by variation mode of ring type ultrasonic motor. Design for the piezoelectric ceramic and elastic body of stator were calculated by the finite element method(FEM) that consider the resonance frequency, vibration mode and coupling efficiency etc. Through the result of vibration analysis from 6 order mode to 8 mode, the 7 order mode was gained very an excellent results that it was the coupling efficient, minimum power loss and bending vibration value. Here over 7 order mode, was acquired that an output current for input voltage was very a large increased results. The result of vibration calculation, from thickness 0.5[mm] to 2[mm], know the fact that the vibration displacement at 0.5[mm] is an high value too. From such analysis result, this paper was manufactured the ultrasonic motor of outer diameter 50[mm], inter 22[mm] having the about 43.86[KHz] resonance frequency. We have gated that a simulation result is 42.2[KHz] and an experiment result is 43.86[KHz]. Then, a propriety of this paper was established the result almost similar to though comparison, investigation of simulation and experiment result.

• Journal of the Institute of Electronics Engineers of Korea TE
• /
• v.39 no.2
• /
• pp.118-123
• /
• 2002

A torque transmission system, which is composed of serveral gears and couplings, is flexible. Therefore, the torsion vibration occurs when the motor speed abruptly changes. Consequently, for accuracy characteristic response of motor, we must suppressed vibration. Therefore, vibration suppression is very important motor control. In order to suppress the vibration, various control method have been proposed. Specially, one method of vibration suppression is used disturbance observer and filter. The disturbance observer is used to suppress the vibration in this method. By feedback of the estimated torsion torque, the vibration can be suppressed. The coefficient diagram method is used to design the filter and proportional controller. But using coefficient diagram method, not adapted controller parameter in disturbance. In order to solve this problem. we used fuzzy controller for auto tuning controller parameter $K_P$. We proved of this approach is confirmed by simulation. 

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1995.04a
• /
• pp.208-212
• /
• 1995

공기 압축기는 건설 및 토목공사 현장 등의 산업현장을 비롯하여 각종 공장에서 광범위하게 사용되고 있다. 공기 압축기에 공급하는 동력은 전기를 사용한 모터와 연료를 사용한 엔진으로 구분할 수 있으며 전기가 공급되지 않는 사용현장에서는 엔진 구동형 공기 압축기가 선택될 수 밖에 없다. 엔진 구동형 공기 압축기는 발생소음도가 모터 구동형보다 훨씬 높음으로 인하여 주변환경에의 소음으로 인한 피해를 줄이기 위하여 방음형의 개발이 절실하게 요구되고 있다. 따라서 본 연구는 기존의 비방음형 공기 압축기에 대하여 방음형을 개발하여 시제품을 제작하고 평가하는데 그 목적이 있다.

• The Journal of the Acoustical Society of Korea
• /
• v.38 no.3
• /
• pp.363-369
• /
• 2019

Various studies have been conducted for the diagnosis of noise condition of complex rotary machines. In this study, diagnosis index using vibration signal is developed for the efficient and objective assessment of noise condition of a blower motor. The noise most commonly caused by the abnormal blower motor are Tick/Click noise and Tone noise. According to cause and noise characteristics, time-frequency analysis is used to diagnose Tick/Click noise, and smoothing in frequency domain is used to diagnose tone noise condition. The noise condition of the blower motors were diagnosed using the developed index and these results are compared with the diagnostic results by the experts. As a result, the agreement rate was about 95 %.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2008.04a
• /
• pp.196-201
• /
• 2008

This paper is about electromagnetic vibration source in outer rotor type of BLDC motors. Experiments are carried out with three pole-slot combinations which are 6 slots, 12 slots, and 24 slots with 4 poles rotor. According to results, vibration sources separate into electromagnetic and mechanical factors. Using the finite element method (FEM), It is analyed that vibration characteristics of electromagnetic source in each type. This paper shows electromagnetic sensitivity to vibration, and introduces necessary point in lower vibration motors. Also rotor balance is important to prevent uneven distribution of magnetic flux between rotor and stator.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.942-945
• /
• 2003

Noise cause is dividing to fluid noise by exhaust flow of fan and vibration noise by rotational vibration of motor. Until now, measuring method has been used to measure vibration by the accelerometer, this method has been not measured for the vibration in some parts of brush and commutator because of motor construction. This research was purposed on the accurate analysis. using laser vibration analyzer, of noise cause against the difficult part in old times. By using this measured data, we would like to use for the design of silent motor.