• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.8C
• /
• pp.711-720
• /
• 2012

In this paper, we introduce the implementation of driver fatigue monitering system and its result. Input video device is selected commercially available web-cam camera. Haar transform is used to face detection and adopted illumination normalization is used for arbitrary illumination conditions. Facial image through illumination normalization is extracted using Haar face features easily. Eye candidate area through illumination normalization can be reduced by anthropometric measurement and eye detection is performed by PCA and Circle Mask mixture model. This methods achieve robust eye detection on arbitrary illumination changing conditions. Drowsiness state is determined by the level on illumination normalize eye images by a simple calculation. Our system alarms and operates seatbelt on vibration through controller area network(CAN) when the driver's doze level is detected. Our algorithm is implemented with low computation complexity and high recognition rate. We achieve 97% of correct detection rate through in-car environment experiments.

• Magazine of the Korea Concrete Institute
• /
• v.11 no.1
• /
• pp.161-171
• /
• 1999

Impact resonance testing was carried out on small and large concrete blocks containing several types of artificial flaws respectively. Quantitative analysis of the observed peak frequencies in the impact resonance tests identifies the possible normal modes of concrete blocks containing flaws. and enables to determine the depth and size of the flaws in concrete blocks. In this study, concrete can be treated as a homogeneous and isotropic material. The flaw size and location at each section of artificial flaw series in small and large concrete blocks, determined through two-dimensional scanning of impact point and real-time fast Fourier transform, are in good agreement with real size location, respectively. Consequently, quantitative analysis method of vibration modes in the impact resonance tests, which can be applied for homogeneous and isotropic material, can be useful for the detection of flaws in any case of small and large concrete blocks in this study.

• Nuclear Engineering and Technology
• /
• v.20 no.4
• /
• pp.253-264
• /
• 1988

Our experience of neutron noise analysis in French-type 900 MWe pressurized water reactor (PWR) is presented. Neutron noise analysis is based on the technique of interpreting the signal fluctuations of ex-core detectors caused by core reactivity changes and neutron attenuation due to lateral core motion. It also provides advantages over deterministic dynamic-testing techniques because existing plant instrumentation can be utilized and normal operation of the plant is not disturbed. The data of this paper were obtained in the ULJIN unit 1 reactor during the start-up test period and the statistical descriptors, useful for our purpose, are power spectral density (PSD), coherence function (CF), and phase difference between detectors. It is found that core support barrel (CSB) motions induced by coolant flow forces and pressure pulsations in a reactor vessel were indentified around 8 Hz of frequency.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.22 no.1
• /
• pp.22-31
• /
• 2002

A Safety Monitoring System using a laser and 2-D arrayed photo sensors is developed. To monitor of the deformation and small rotation of structure the developed optical system using 2-D photo sensor array was used to detect the variation of optical orbit of laser which was induced by deformation of the structure. Also, an operating program to manage the system and an algorithm for the data acquisition and the database are introduced. In this study, we demonstrated the capabilities of this system by laboratory experiments before applying the system to the field.

• Nuclear Engineering and Technology
• /
• v.20 no.3
• /
• pp.170-178
• /
• 1988

An automated ultrasonic flaw detection system was developed for thin-walled and short tubes such as Zircaloy-4 tubes used for cladding heavy-water reactor fuel. The system was based on the two channels immersion pulse-echo technique using 14 MHz shear wave and the specially developed helical scanning technique, in which the tube to be tested is only rotated and the small water tank with spherical focus ultrasonic transducers is translated along the tube length. The optimum angle of incidence of ultrasonic beam was 26 degrees, at which the inside and outside surface defects with the same size and direction could be detected with the same sensitivity. The maximum permissible defects in the Zircaloy-4 tubes, i.e., the longitudinal and circumferential v notches with the length of 0.76mm and 0.38mm, respectively and the depth of 0.04 mm on the inside and outside surface, could be easily detected by the system with the inspection speed of about 1 m/min and the very excellent reproducibility. The ratio of signal to noise was greater than 20 dB for the longitudinal defects and 12 dB for the circumferential defects.

• Parasites, Hosts and Diseases
• /
• v.23 no.1
• /
• pp.123-139
• /
• 1985

The present survey was undertaken to observe the geographical distibution of matacercaria among the sweetfish, Plecoglossus altivelis, the most important second intermediate host of Metagonimus yokegawai, which were collected during the period from 1983 to 1984 in south-eastern coastal areas of Korea. The results obtained were summarized as follow: 1. A total of 668 sweetfish collected from 70 chins (=streams) in the above coastal arcus was examined for the metacercariae, and 432 (64.7%) among them were infected with metacercariae of M. yokogawai. The mean number of metacercariae in a fish was in the range from 0 to 29,604 and the mean number of the metacercariae in a fish was 640.3. 2. It was observed that the mean infection rate showed 46.45 in Gangweon-Do (=province) . The infection rates varied from stream to stress showing 100% in Namdae stream(Gangnun-city) , Obsib stream (Samchok-gun) and Dongmak, 95.0% in Hosan stream, 90.0% in Gungchin stream, and Namdae stream (Yangyang-fp) ,80.0% in Hwasang stream,50.0% in Daebong stream,45.0% in Yonghwa stream, 30.0% in sangchsn stream and Sachsn stream, 20.0% in Munam stream and Okgyoe stream, 15.0% in Imweon stream, 10.0% in Namchsn stream. And no metacercarial infections in their fish host were found in the areas of Mulchi stream, Sangun stream, Gosamun stream, Jonchon stream and Gagok stream. 3. It was observed that the mean infection rate showed 50.9% in Kyangsangbuk-Do (=province). The infection rates also varied from stream to stream showing 100% in Songchon stream, Osib stream (Yongdok-gun) and Daejong stream,60.0% in Pyanghae stream and Gunmu stream,50.0% in Buhwung stream and stream, 25.0% in Nagok stream, 20.0% in Oangbi stream, 10.0% in Namhodong stream. And no metacercarial infections in their fish host were found in the areas of Namdae stream (Uljinup) and Chaksan stream. 4. It was observed that the mean infection rate showed 67.6% in Kyangsangnam-Do(=province). The infection rates varied from stream to stream showing 100% in Taehwa river, Hwiya river, Inchfn stream, Miryang river, Nam river, Hwagae stream, Koha stream, Sosang stream, and Tongchon stream,90.9% in Yancho stream,90.0% in Hoihwa stream,80.0% in Chindong stream, 66. YoA in Chingyo stream, 40.0% in Hoyam river. And no metacercarial infections in their fish host were found in the areas of Chinjon stream, Sanchan stream and Jukch6n stream. 5. It was observed that the mean infection rate showed 94.6"A in 0h511anam-Do(=province). The infection rates varied from stream to stream showing 100% in DongchEn stream, Isachon stream, Somjin river(GoksEng-gun) , Ssmjin river(Kurye-gun) , S6si stream, Gokchsn stream, Kohung stream, Kwansan stream, Youi stream, stream, Unj6n stream and Apnae stream, 92.3% in Tamjin river, 90.9% in Okkok stream, 84.6% in Songgen stream. And no metacercarial infections in their fish host were found in the area of Ypmgpl stream. 6. On the other hand, the infection rate showed 100% in Inchsn river of Chollabuk Do (=province) (=province) and Kangsn stream of Cheju-Do(=province) .

• Journal of the Mineralogical Society of Korea
• /
• v.24 no.4
• /
• pp.289-300
• /
• 2011

Atomistic origins of carbon solubility into silicates are essential to understand the effect of carbon on the properties of silicates and evolution of the Earth system through igneous and volcanic processes. Here, we investigate the atomic structure and NMR properties of dissolved carbon in enstatite using Raman spectroscopy and quantum chemical calculations. Raman spectrum for enstatite synthesized with 2.4. wt% of amorphous carbon at 1.5 GPa and $1,400^{\circ}C$ shows vibrational modes of enstatite, but does not show any vibrational modes of $CO_2$ or ${CO_3}^{2-}$. The result indicates low solubility of carbon into enstatite at a given pressure and temperature conditions. Because $^{13}C$ NMR chemical shift is sensitive to local atomic structure around carbon and we calculated $^{13}C$ NMR chemical shielding tensors for C substituted enstatite cluster as well as molecular $CO_2$ using quantum chemical calculations to give insights into $^{13}C$ NMR chemical shifts of carbon in enstatite. The result shows that $^{13}C$ NMR chemical shift of $CO_2$ is 125 ppm, consistent with previous studies. Calculated $^{13}C$ NMR chemical shift of C is ~254 ppm. The current calculation will alllow us to assign potential $^{13}C$ NMR spectra for the enstatite dissolved with carbon and thus may be useful in exploring the atomic environment of carbon.

• Korean Journal of Mineralogy and Petrology
• /
• v.34 no.4
• /
• pp.265-275
• /
• 2021

Findings of microplastics and nanoplastics from diverse natural environments have increased demand for research of the fate and transport of the potentially toxic plastic particles in soils and groundwater. Weathering of microplastics would generate a significant amount of nanoplastics, but nanoplastics research is scarce because of technical difficulties in detecting nanoplastics in environments and analyzing nanoplastics adsorption to mineral surfaces. In the current study, we tested a possibility using quartz crystal microbalance (QCM) for application to nanoplastics adsorption analysis on mineral surfaces. In silica (SiO₂)-packed column experiments, a measurable adsorption capacity for polystyrene nanoparticles often requires injection of unrealistically high ionic strengths or concentrated nanoplastic particles. The current test shows that QCM can measure polystyrene nanoplastics adsorbed onto SiO₂ surface under the low ionic strengths and nanoplastics concentrations, where typical column experiments cannot. QCM is a promising tool for understanding the interaction between nanoplastics and mineral surfaces and thus transport of nanoplastics in soils and groundwater.

• Korean Journal of Crystallography
• /
• v.17 no.2
• /
• pp.60-65
• /
• 2006

표면 및 계면층의 결정구조, 결함구조, 불순물 편석, 표면의 전자 구조, 원자 진동 등과 같은 산화물의 표면물성은 촉매, 센서, 소결, 마찰, 부식 등과 같은 분야에서 그 특성을 좌우한다. 고체 표면의 결정구조 해석 수단으로 저에너지 이온산란 분광법이 유용한 도구로 알려져 있는데, 이 방법의 뛰어난 표면민감성은 표면에서의 효과적인 이온 중성화 과정에 기인한다. $He^+$, $Ne^+$, $Ar^+$ 등과 같은 이온은 Auger 중성화 과정에 의하여 쉽게 중성원자화 되고, 중성화 확율의 타겟에 대한 의존성이 낮기 때문에 이온빔으로서 종종 사용된다. 산란각도를 180$^{\circ}$로 고정하여 산란이온 검출기를 설치한 직충돌 이온산란 분광법의 경우는 산란된 이온의 궤적이 입사궤도와 거의 동일하기 때문에 산란궤적의 계산이 간단해지고, 수 층 깊이의 원자구조의 해석이 가능해진다. 본 고에서는 고체 표면의 원자구조를 실공간에서 해석할 수 있는 직충돌 이온산란 분광법에 대하여 측정의 기본원리, 측정장치, 간단한 분석 예 등에 관하여 기술하고자 하며, 다음 편에서는 복잡한 표면구조를 가지는 반도체 표면에서 직충돌 이온산란분광법의 이용하여 해석한 예를 중심으로 기술하고자 한다.

• The Journal of the Acoustical Society of Korea
• /
• v.16 no.4
• /
• pp.21-28
• /
• 1997

In this study, comparison between Harris-theoretical values and experimental data of load-deflection characteristics in bearing was made. The experiments are conducted under the conditions of the various radial loads and speed of shaft. In the case of non-defective ball bearing, the experimental data agreed well with the Harris-theoretical values for the small steady radial load but not for the large steady radial load. For the radial load bearing, the experimental results show that the stiffness of bearing at the single and multiple defective bearing are bigger in the radial defectiion than in the axial deflection. Load-deflection characteristics for the bearing defect part make it possible to detect the presence of a defect in bearing.