• Journal of Korean Society of Steel Construction
• /
• v.27 no.2
• /
• pp.231-241
• /
• 2015

The direct strength method (DSM) has been adopted by the NAS (2004) and AS/NZS 4600 (2005) for the design of cold-formed steel members. The method can be successfully applied to the design of welded steel members. This paper reviews the development of the DSM for welded steel structural members. The design strength formulae for welded section columns and beams for the DSM are based on the test results performed on welded H-section, C-section, circular and rectangular hollow section columns, plate girders and stiffened plates. The comparison between the design strength of welded sections predicted by the DSM and that estimated by existing specifications is also provided. The comparison verifies that the DSM can properly predict the compressive, flexural and shear strength of welded section columns and beams with the interaction between local and overall buckling.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.36 no.6
• /
• pp.1109-1116
• /
• 2016

There are various test methods for evaluating the reflective cracking resistance of asphalt concrete pavement. Repeated direct tensile test is cheap and simple compared to the other traditional experimental methods. Determination of failure criteria is needed to apply a repeated direct tensile test. Various methods were used to determine the number of failure of repeated direct tensile test. The number of failure was defined as the time to reach 10% of the initial load, this method can be satisfied with specified tolerance of 10%. When the thickness of specimen is increased to 50 mm from 30 mm, the failure number is increased by 13.6 times. Thus, this result shows that the thickness of pavement is a big influence on the reflective cracking resistance. Reflective cracking resistance of asphalt concrete is decreased according to the increase in opening displacement. The repeated direct tensile test can be used as a reflective cracking resistance factor in pavement design, because it can evaluate the reflective cracking resistance according to the pavement thickness, opening displacement, material properties etc.

• Journal of Navigation and Port Research
• /
• v.35 no.8
• /
• pp.643-647
• /
• 2011

In this paper, we study the application of DSSS(Direct Sequence Spread Spectrum) in underwater acoustic communication for robust the ISI(Inter-Symbol Interference. We confirm the application of DSSS in underwater acoustic communication in underwater by the simulation with underwater channel impulse response and experiment. As a simulation result, the BER of QPSK technique is $1.14{\times}10^{-1}$ and the BER of DSSS technique is $6.73{\times}10^{-3}$. And we performed the experiment of DSSS technique in underwater. As a experiment result, the BER of QPSK technique is $3.19{\times}10^{-1}$ and the BER of DSSS technique is $5.17{\times}10^{-4}$.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.10
• /
• pp.7021-7033
• /
• 2015

This study aims to verify the structured relationship between college students' stress and their stress in the meditating depression and self-efficacy. Findings of the research are summarized as follows. The study looked into how stress would directly affect depression and self-efficacy. It was found that the stress would have immediate effects on depression and self-efficacy. In addition, it was noticed that stress indirectly influences college students' subjective happiness in meditating factors of depression and self-efficacy. After the investigation on the immediate effects of depression in relation to the self-efficacy, results of the study indicated that depression has an immediate negative influence on the self-efficacy. Self-efficacy appeared to affect subjective happiness positively and directly. However, its indirect effects on the subjective happiness was confirmed. Although the study failed to find any direct influence of the stress on subjective happiness, it was learned that stress causes an indirect effect through the meditating factors of depression and self-efficacy. In conclusion, the study suggests that subjective happiness can be improved by stress and depression relaxation, and improvement of self-efficacy.

• Environmental and Resource Economics Review
• /
• v.15 no.3
• /
• pp.531-553
• /
• 2006

As energy conservation can be realized through changes in the composition of goods and services consumed, there is a need to assess indirect and total household energy requirements. The Korean household sector was responsible for about 55% of the country's primary energy requirement in the period from 1990 to 2000. And more than 60% of household energy requirement was indirect. Thus, indirect and total rather than direct household energy requirements should be the target of energy conservation policies. Increases in household consumption expenditure were responsible for a relatively high growth of energy consumption. Switching to consumption of less energy intensive products and decrease in energy intensities of products contributed substantially to reduce the increase in total household energy requirement.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.20 no.5
• /
• pp.107-115
• /
• 2006

The existing DLC system functionally has two defects. One is it has to be controlled by operators whenever customer's portion of loads are increased more than predefined objected load. Therefore, it may be possible for propagating uncontrolled loads if operators make a mistake. The other one is that currently used DLC algorithm is usually focused on ON/OFF load control not concerning about reliving participated customer's inconvenience. Therefore, that is a major obstacle to attract customer participating in demand response program. This paper represents direct load control system using active database. By using active database, DLC system can control customer's load effectively without intervening of operator. And by using dynamic programming based on the order of priority for DLC algorithm, it is possible to maximize participating customer's satisfaction.

• International Commerce and Information Review
• /
• v.18 no.1
• /
• pp.235-258
• /
• 2016

This study is to arrange the amount of foreign direct investment(FDI) inflow into the country between 2011 and 2013, using the Input-output Table on the basis of the bench-mark table of the same period, based on the Industry Relation Table. As a result, the average amount of FDI inflow of the three years was estimated 15.3 trillion won, and the average gross product inducement amount 45.8 trillion won. The characteristic of FDI inflow is that it is weighted in the industries with the high index of the sensitivity of dispersion and the high index of the power of dispersion, such as chemical products, electric and electronic equipment and metal products. It is especially anticipated to attract FDI to the industry with the high index of the sensitivity of dispersion used as the intermediary product.

• Korean Journal of Plant Resources
• /
• v.11 no.1
• /
• pp.9-14
• /
• 1998

Two types of somatic embryos were directly induced from the immature zygotic embryos of the wild prunus yedoensis in Mt. Halla after 16 weeks of culture on MS medium supplemented with 0.1mg/L $GA_3$ and 0.1mg/L BAPor 0.5mg/L $GA_3$ and 0.1mg/L BAP. One was normal single embryo with a single basal part. Normal somatic embryos germinated successfully on 1/2 MS medium. However, abnormal nulticotyledonary somatic embryos, formed shoots only on hormone free MS medium and about 80% of shoots rooted on MS medium with 0.5mg/L IBA. The mximum frequency (62.5%) of normal somatic embryos was directly obtained from the zygotic embryo 30 days after full blooming but it was decreased with further maturation.

• Journal of Korea Society of Industrial Information Systems
• /
• v.20 no.6
• /
• pp.67-78
• /
• 2015

The objective of this paper is to analyze survival rate and factors of FDI(Foreign direct investment) using FDI data of Ministry of Knowledge and Economy. Kaplan-Meier estimation was used. The result was as follows. M&A of FDI was much more risk than Greenfield FDI. .FDI to the IT-service industry was much more risk than FDI to the manufacturing industry. Partnership under 50% was much more risk than partnership over 50%. The accumulated survival rate of M&A was higher then Greenfield until fourth period but was lower than Greenfield after fourth period. The accumulated survival rate of M&A was lower than others from the first period to last period. There was no difference between Partnership under 50% and partnership over 50% to 4th period. After 4th period, Accumulated survival rate of partnership under 50% was higher than accumulated survival partnership over 50%.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.12
• /
• pp.2618-2624
• /
• 2009

Harmonics (or distortion in wave form) has always existed in electrical power systems. It is harmless as long as its level is not substantial. However, with the recent rapid advancement of power electronics technology, so-called nonlinear loads, such as variable frequency drives for motor power/speed control, are increasingly finding their way to shipboard or offshore applications. In this paper a new approach to direct torque control (DTC) of induction motor drive is presented. In comparison with the conventional DTC methods the inverter switching frequency is constant and is dramatically increased, requiring neither any increase of the sampling frequency, nor any high frequency dither signal. The well-developed space vector modulation technique is applied to inverter control in the proposed DTC-based induction motor drive system, thereby dramatically reducing the current harmonics. As compared to the existing DTC approach with constant inverter switching frequency, the presented new approach does not invoke any concept of deadbeat control, thereby dramatically reducing the computations.