• Journal of Advanced Navigation Technology
• /
• v.24 no.6
• /
• pp.557-565
• /
• 2020

In order for thermal degradationIn, excore nuclear flux monitoring system, as a monitoring and signal processing methodology of reactor power, monitors neutron pulses generated during nuclear fission as frequency status, and converts them into DC voltage, and then log values resultantly. The methods realy applied in the nuclear power plant are to construct combination of counters and flip-flops, or diodes and capacitors up to now. These methodes are reliable for relative high frequencies, while not credible for reasonable low frequencies or extreme low values. Therefore, we developed the circuit that converts frequencies into DC voltages, into and into log DC values in the wide range from low Hz to several hundred high kHz. We proved their validities through testing them using real data used in nuclear power plant and analyzed their results. And, these methods will be used to measure the neutron level of excore nuclear flux monitoring system in nuclear power plant.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.19 no.3
• /
• pp.497-506
• /
• 2024

In this paper, medium-power wireless power transmission is implemented using the commercial power frequency (60 Hz). Since general magnetic induction wireless power transmission devices use more than several tens of kHz, the commercial power frequency (60 Hz) cannot be used as is. Therefore an AC/DC converter is used to convert the 60 Hz power frequency into DC, and a high-frequency power amplifier is used to convert DC into several tens of kHz. In magnetic induction wireless power transmission, the AC/DC converter and high-frequency power amplifier are removed, and a extremely low frequency wireless power transmission(ELF-WPT) system using commercial frequency consisting of only transmitting resonance tank, transmitting coil, receiving resonance tank, and receiving coil is implemented, and verified through wireless power transmission experiments.

• Asia-pacific Journal of Multimedia Services Convergent with Art, Humanities, and Sociology
• /
• v.7 no.6
• /
• pp.709-718
• /
• 2017

The installation of the elevator ARD(Automatic Rescue Device) system has been forced into law in these days in order to safely rescue passengers during power failure. The configuration of the ARD system consists of energy storage device, power converter and control systems. The EDLC(Electric Double Layer Capacitor) are used as energy storage device for rapid charge/discharge purposes. The power conditioning system (PCS) consists of bi-directional converter, 3-phase converter and control system. The dead-beat control system is adopted for most systems however it requires complex mathematical calculations, the high performance microprocessors are mandatory and thus it can be a cause of high manufacturing cost. In this paper the new control method for average current mode control is presented for simple structure. The control algorithm is applied to the single phase system and then expands to three phase system to meet the sysem requirements. The mathematical modeling using average modeling method is presented and analysed by PSIM computer simulation to verifie the validity of the proposed control methods.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.06a
• /
• pp.138.1-138.1
• /
• 2010

직접메탄올 연료전지는 액체 메탄올 저장의 이점을 가지고 있어 이동형 전원 등의 응용에 적합하며, 최근 군사용 통신 전원이나 노트북용 전원으로 사용하기 위한 연구가 활발히 진행 중이다. 그러나 연료전지 스스로는 초기 기동을 할 수 없고 부하의 응답 특성에 빠르게 대응하기 어렵다. 따라서 연료전지와 배터리를 하이브리드로 구성하면 이러한 문제를 해결할 수 있을 뿐만 아니라 연료전지에 대한 부하가 안정되어 수명 연장에도 긍정적인 효과를 얻을 수 있다. 본 연구에서는 직접메탄올 연료전지와 리튬 이차전지를 연계하여 하이브리드 시스템을 구성하고자한다. 시뮬레이션을 통해 채널 형상에 따른 유동 및 차압을 해석하였으며, Single Cell, Short Stack 및 Stack의 특성을 평가하였다. 또한 하이브리드 시스템은 연료전지 스택, 연료전지 운전 장치, 리튬 이차전지, BMS, PCM, DC/DC Converter 등을 구성하여 시스템의 특성 등을 관찰하고자한다.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.52 no.5
• /
• pp.230-237
• /
• 2003

Current mode control has been used for DC to DC converters for over twenty years. There are many different control schemes which use the inductor current signal in one way or another to control the DC to DC converter. In this paper, the state space averaging technique is applied for the analysis of flyback type current mode control circuit. We made real converter for the guarantee of stable output characteristic and proper design of feedback circuit. The validity of proposed method is verified from test result. The improvement of stability is confirmed by sinusoidal signal injection method with isolated transformer. It is known that phase margin is sufficient and gain crossover frequency fc is early 1/5 of switching frequency, fs, from the experimental result with frequency response analyzer.

• 한국신재생에너지학회:학술대회논문집
• /
• 2008.05a
• /
• pp.546-549
• /
• 2008

Hyundai Motor Company has made an effort to develop fuel cell electric vehicle and its subsystem in recent years. This paper deal with the development of electric drive system applied to Hyundai's fuel cell electric vehicle. This system is composed of three main components such as motor, inverter and DC/DC converter. The specifications of each system is introduced briefly and experimental result of its main components is presented. In addition, we introduce the development status of power semiconductor device, film capacitor, inductor and permanent magnet.

• Proceedings of the KIPE Conference
• /
• 2007.11a
• /
• pp.118-120
• /
• 2007

일반적인 AC/DC변환 장치는 안정화된 직류 전원을 얻기 위해 대용량의 커패시터와 고속의 전력용 반도체 스위칭 소자를 사용한다. 하지만, 이러한 소자의 사용으로 인해 입력측의 고조파 손실 및 역률 저하의 문제점을 갖게 되고 고속 스위칭에 따른 스위칭 손실에 의한 효율이 저하되는 문제점을 갖게 된다. 따라서 본 논문에서는 역률개선이 가능하고 스위칭 손실이 저감되는 ZVS 방식을 이용한 새로운 형태의 역률개선용 소프트스위칭 방식의 부스트 컨버터를 제안한다.

• Proceedings of the KIPE Conference
• /
• 2017.11a
• /
• pp.17-18
• /
• 2017

본 논문에서는 수소자동차(Fuel Cell Electric Vehicles: FCEVs)용 고전압 직류 변환장치 (High Voltage DC-DC Converter: HDC)의 소프트 스위칭 셀 최적 설계 방안을 제시한다. 선정된 소프트 스위칭 셀에서 손실 분석을 통해 최적의 공진 네트워크 설계를 제안한다. 제안하는 설계 방안의 타당성은 실험 분석을 통해 검증한다.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.8 no.5
• /
• pp.442-449
• /
• 2003

This paper discusses how to generate the reference compensation voltages in Dynamic Voltage Restorers (DVR) by use of PQR instantaneous power theory. Sensed three-phase terminal voltages are transformed to PQR coordinates without time delay. Since the reference voltage in PQR coordinates is a single dc value, the voltage controller for DVRs is simple and easy to design. Proposed control method can be implemented by feedforward controllers or by feedback controllers. This paper verified the theory by a feedforward controller of a DVR with simulation and experiment.

• Proceedings of the KAIS Fall Conference
• /
• 2011.05a
• /
• pp.12-16
• /
• 2011

최근 정부의 녹색성장(Green Growth) 정책으로 대규모의 풍력발전소 단지가 배전계통에 적극적으로 도입, 운용되고 있다. 풍력발전기의 대표적인 타입 중에 DFIG(Doubly-Fed Induction Generation)는 MSC와 GSC라는 2가지 요소로 구성된다. MSC(Machine-Side Converter)는 발전량을 이용하여 발전기의 토크 또는 회전속도를 제어하며, 발전기에 여자 전류를 공급함으로써 고정자에서 유입되는 무효전력 제어를 담당한다. 그리고 GSC(Grid-Side Converter)는 전력변환 장치의 직류단 전압을 제어하고, GSC와 배전계통 사이의 무효전력도 제어한다. 본 논문에서는 상기의 이론을 바탕으로 PSCAD/EMTDC를 이용한 DFIG 모델링을 수행하여, 다양한 Simulation으로 모델링의 유효성을 확인하였다.