• Proceedings of the KIPE Conference
• /
• 2017.07a
• /
• pp.314-315
• /
• 2017

본 논문에서는 철도 직류 급전용 싸이리스터 이중 컨버터 전력 시스템의 병렬운전 제어기법을 제안한다. 싸이리스터 이중 컨버터 전력 시스템의 병렬운전 시 발생하는 순환전류 및 전류 불균형은 제안하는 병렬운전 기법을 통해 제어가 가능하다. 또한 제안하는 제어 기법은 동일한 응답을 가지면서 출력 측 전류 센서의 제거가 가능하다. 제안하는 제어기법의 타당성은 10kW급 축소모델의 시험을 통해 검증하였다.

• Proceedings of the KSR Conference
• /
• 2008.06a
• /
• pp.451-465
• /
• 2008

The DC over current relay(76i) and the DC under voltage relay(mid-point relay, 80A) used mainly with DC protective relay system of DC electric railway in Korea, But the DC fault selective relay(50F) is applying to recently mainly. In this study, simulation to compare 76i/80A and 50F in the methods of protection and the operational characteristics were executed through verifying a calculation of short circuit current and using PSCAD/EMTDC transition program. As a result of this study, it was proved that while 80A runs in relation to the scale of fault resistance, 50F runs regardless of the scale of fault resistance or the length of rail.

• Proceedings of the KIEE Conference
• /
• 2002.11b
• /
• pp.290-292
• /
• 2002

전기철도 급전계통은 차량 또한 이동 부하이고, 비정상적인 전기적 특성이 나타날 수 있으므로, 전기적으로 정확한 해석을 할 필요가 있다. 본 연구는 PSCAD/EMTDC 과도해석 프로그램을 이용하여 직류 전기 철도 시스템을 모델링 함으로써 전기철도 급전계통의 정확한 특성을 연구하는 것이다. 한전 계통으로부터 전력을 급전 받아 전기철도차량 부하에 공급되는 급전계통을 실제와 가깝게 모델링 함으로써 정상상태 해석과 사고 시 과도특성 분석 및 계통에의 영향 해석을 목적으로 한다. 프로그램 특성상 각각의 소자를 모델링 한 후 4단자망 이론에 근거, 각 소자를 결합하여 전체 계통을 구성한다. 각각의 소자는 전차선로, 정류기 및 제어기를 포함한 차량부 (전동기, 제어소자), 정류 변전소 등으로 구성된다. 이 논문에서는 급전계통의 정상상태 및 고장전류를 분석함으로서 제안된 모델을 검증한다.

• Journal of the Korean Society for Railway
• /
• v.19 no.6
• /
• pp.727-735
• /
• 2016

Smart transformers are effective at reducing the weight and increasing the efficiency of traction systems for railroad applications. A smart transformer generally consists of rectifier modules and the Dual-Active-Bridge (DAB) converter modules. The efficiency of the smart transformer depends on not only the electrical characteristics, but also on the control method of the converter modules. Especially, a DAB converter has a high order degree of freedom of voltage modulation to control the power transferred through the high frequency transformer, and a voltage modulation method, are very critical for the efficiency of the DAB converter. This paper proposes a new voltage modulation method for the DAB converter to increase the efficiency in the low/medium power transfer condition. The proposed modulation method controls the reactive power in the high frequency transformer, making it zero. And, the switching loss is dramatically reduced by using the received converter module as a diode rectifier. The feasibility of the proposed modulation method is verified by computer simulation of the 900Vdc DAB converter power control.

• Proceedings of the KSR Conference
• /
• 2006.05b
• /
• pp.722-727
• /
• 2006

• Proceedings of the KSR Conference
• /
• 2006.05b
• /
• pp.1088-1095
• /
• 2006

• Journal of the Korean Society for Railway
• /
• v.12 no.2
• /
• pp.254-259
• /
• 2009

DC transit system has been adopted in the metropolitan area, Korea since 1974. Electric multiple (EMU) in this system always reiterates that acceleration and retardation. When EMU decelerates using electric breaking, regenerative power occurs. Regenerative power can be consumed in vicinity EMU on the same line or in resistor. If DC transit system has inverter for reusing regenerative power, Energy efficiency in DC transit system and the replacement cycle of brake shoe in EMU will be increased and dust due to mechanical braking decreased. This paper present the developed inverter for regenerative power and its test equipment. Test for developed inverter is performed at test equipment and is divided into three items, which are regeneration mode, active filter mode, and system link test.

• Proceedings of the KSR Conference
• /
• 2008.11b
• /
• pp.185-189
• /
• 2008

D.C. traction systems can cause stray currents which could adversely affect both the railway concerned and outside installations, when the return circuit is not sufficiently insulated versus earth. As experience for several decades has not shown evident corrosion effects from a.c. traction systems and actual investigations are not completed, stary currents flowing from a d.c. traction system is issued. D.C. traction systems can cause stray currents can be corrosion and subsequent damage of metallic structures, where stray currents leave the metallic structures. There is also the risk of overheating, arcing and fire and subsequent danger to persons and equipment. Any provision employed to control the effects of stray currents be checked, verified and validated. Direct measurement of stray current is difficult and a provision employed to control the effects of stray currents is proposed.

• Proceedings of the KSR Conference
• /
• 2006.05b
• /
• pp.1215-1220
• /
• 2006

• Journal of the Korean Professional Engineers Association
• /
• v.31 no.4
• /
• pp.28-32
• /
• 1998