• Proceedings of the SAREK Conference
• /
• 2003.07a
• /
• pp.137-137
• /
• 2003

• Journal of the Korea Institute of Military Science and Technology
• /
• v.18 no.4
• /
• pp.415-422
• /
• 2015

The flow field structures of dual jet-in-cross-flow were examined experimentally for in-lined perforated damage holes configuration using particle image velocimetry. Ensemble averaged in-plane velocity and vorticity data in the jet were determined to study the mean jet structure. Jets are formed by pressure differences between upper and lower airfoil surface. The flow structure of vicinity of the thru holes consist of a vortical structure that wrap around the jets like a horseshoe and develop further downstream through a pair of stream-wise vortices. The shape, size and location of the horseshoe vortex were found to be dependent on the angle of attack. In spite of the existence of battle damage holes, the effect on the control force was insignificant when the damage size was not large enough.

• Proceedings of the SAREK Conference
• /
• 2003.07a
• /
• pp.136-136
• /
• 2003

• Journal of Wetlands Research
• /
• v.16 no.1
• /
• pp.51-59
• /
• 2014

A sewage was treated using serially combined vertical and horizontal flow zeolite-filled reed bed. The sewage from the student dormitory of Changwon National University was fed into the reed bed for 10 minutes every 6 hours at the hydraulic load of 314 $L/m^2{\cdot}day$. The reed bed depth was 100cm and the zeolite mixture was filled in the reed bed. The mixture consisted of the same volume of two types of zeolite ; 0.5~1mm and 1~3mm in diameter. pH value decreased in vertical bed, while it increased in horizontal bed. But DO concentration in the effluent of both beds was higher than that in the influent. Average removal efficiencies of the entire treatment system were 99.22% SS, 95.56% BOD, 91.02% $COD_{Cr}$, 87.78% $COD_{Mn}$, 45.87% T-N, 99.88% $NH{_4}^+-N$ and 71.17% T-P. Most of T-N in the effluent was $NO{_3}^--N$. However, the concentration of $NO{_2}^--N$ in the effluent was lower than 0.04 mg/L. All removal efficiencies did not show a remarkable seasonal change.

• Proceedings of the KIPE Conference
• /
• 2013.07a
• /
• pp.345-346
• /
• 2013

본 논문에서는 단상 1.9kV/127V, 2kVA 용량의 양방향 지능형 반도체 변압기의 시작품을 제작하고 그 동작특성을 실험적으로 분석한 내용을 기술하고 있다. 제작한 반도체 변압기는 3대의 LLC 컨버터를 입력 측은 직렬로 결합하고 출력 측은 병렬로 결합한 AC-DC 컨버터와 1대의 하드스위칭 양방향 2-Stage DC-AC 컨버터가 직렬로 결합되어 있다. 제안하는 반도체변압기의 회로적인 특성을 분석하기 위해 PSCAD/EMTDC 소프트웨어를 이용한 시뮬레이션을 실시하였고 분석을 통해 얻은 결과를 바탕으로 하드웨어 시작품을 제작하고 다양한 실험을 통해 그 동작과 성능을 검증하였다. 먼저 1차적으로는 정상동작에 대해 실험을 실시하고 얻은 결과를 시뮬레이션 결과와 비교 분석하였다. 2차적으로는 전력의 흐름에 따른 동작을 실험적으로 분석하였다. 그 후에는 입력전압에 외란이 발생하였을 때 보상성능을 순방향 조류와 역방향 조류 2가지 경우로 나누어 실험을 실시하고 그 결과를 실험결과와 비교 분석하였다. 분석한 결과 제안하는 반도체변압기는 양방향 전력흐름이 가능하고 입력전압에 Sag가 발생한 경우에도 이를 보상하여 수전단이나 부하에 전력공급이 가능함을 알 수 있었다. 향후 단상 반도체 변압기 2대를 더 제작하여 3상 3.3kV/380V, 6kVA 용량으로 확대하여 실험을 실시할 예정이다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.36 no.2
• /
• pp.131-136
• /
• 2008

The characteristics of the flowfields around two circular cylinders in various arrangements were investigated by PIV. In tandem arrangement, the Strouhal numbers measured in the rear region of the cylinder of wake side were decreased with the space ratios, the flow between two cylinders was almost stagnated and the closer to upstream cylinder, the larger the width of the stagnated region was. The direction of vortex between two cylinders was opposed each other with the small difference(${\alpha}$=${\pm}1.0^{\circ}$) of the attack angle . In side by side arrangement, the flow velocity between two circular cylinders were increased with the space ratios.

• Journal of Korean Society of Water and Wastewater
• /
• v.25 no.4
• /
• pp.497-502
• /
• 2011

In order to examine the effects of combination of plug flow reactors in series on hydraulic characteristics, comparative tracer tests were conducted for the cases of the existing clear well and clear wells combined in series. From the results of tests, $T_{10}$/T within existing clear well was 0.62~0.68 depending on inlet flowrate, and that in the case of combination in series was 0.69~0.78. While it would be minor improvement in contact efficiency, it would be appropriate to combine two clearwell with pipe in series for expansion.

• Proceedings of the KIEE Conference
• /
• 2002.07d
• /
• pp.2463-2465
• /
• 2002

본 논문에서는 Home Automation을 위한 하드웨어와 제어용 프로그램의 개발에 목적을 두었다. Home Automation에 쓰인 하드웨어 부분에서는 8051 마이크로 컨트롤러를 사용했다. 본 논문에서 가장 중요한 부분은 플랜트끼리의 통신 알고리즘이며, 일반 가정용 IBM PC의 USB 포트를 이용한 화상 전달방법이다. 화상 전달에 필요한 DLL부분은 C++로 제작되었으며 전체적인 제어용 프로그램은 비주얼툴인 Visual Basic으로 제작하였다. 하드웨어는 각각의 플랜트에 따라 각각의 구동부가 있으며 몇몇 구동부에는 다중 통신을 위한 8051 마이크로 프로세서가 있다. 이 모든 장치의 데이터 흐름을 알 수 있도록 PC를 통해 디스플레이하며 PC와 직렬 통신을 통해 이 모든 것이 이루어진다.

• Proceedings of the SAREK Conference
• /
• 2007.11a
• /
• pp.534-539
• /
• 2007

The objectives of the present work is to investigate the influence of the solution cooled absorber(SCA), refrigerant drain heat exchanger(RSX), exhaust gas/solution heat exchanger(ESX) and high efficiency solution heat exchanger on COP for a double-effect series-flow absorption chiller. A simulation program has been prepared for the cycle analysis of absorption chillers. As a result, Solution heat exchangers(LSX, HSX) are a most effective element for the COP than the others. In spite of the poor contribution to COP, SCA make a rule to reduce the crystallization phenomena of LiBr solution at solution heat exchanger. And the optimum solution split ratio are varied with the relative size of RSX and LSX.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.20 no.10
• /
• pp.662-668
• /
• 2008

The objectives of the present work are to investigate the influence of the solution cooled absorber(SCA), refrigerant drain heat exchanger(RSX), exhaust gas/solution heat exchanger(ESX) and high efficiency solution heat exchanger on COP for a double-effect series-flow absorption chiller. A simulation program has been prepared for the cycle analysis of absorption chillers. As a result, solution heat exchangers(LSX, HSX) are the most effective element for the COP than the others. In spite of the poor contribution to COP, SCA plays an important role to reduce the crystallization phenomena of LiBr solution at solution heat exchanger. And the optimum solution split ratio varies with the relative size of RSX and LSX.