• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.4
• /
• pp.805-810
• /
• 2014

In this paper, the characteristics of a series-fed dipole pair antenna with an end-aligned strip pair director are studied. In the proposed SDP antenna, two strip dipole antennas with different lengths and a ground reflector are connected trough a coplanar stripline. The strip pair director placed above the second dipole element are two rectangular-shaped strips and is aligned at the ends of the two arms of the second dipole. The variations on the antenna performance for different lengths and widths of the director are analyzed, and optimal design parameters for the enhancement of the bandwidth are obtained. The optimized SDP antenna is fabricated on an FR4 substrate, and the experimental results show that the antenna has a frequency band of 1.65-2.95 GHz for a VSWR < 2, which shows enhanced bandwidth compared to the conventional SDP antenna.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.11
• /
• pp.2139-2144
• /
• 2017

In case of communication method and protocol applied to the industrial field, various kinds and methods are applied to the field according to the environment and hardware configuration specifications. In order to develop and construct an industrial monitoring system, the development of the equipment is carried out through hardware system analysis and communication protocol analysis each time, so that a lot of development costs and time are being entered. In this paper, we proposed a programmable protocol conversion algorithm to support the integrated monitoring of industrial equipment using various protocols. This method can extract the necessary data from the data transmitted by serial communication, NMEA, CAN, Modbus communication method and transmit it to Ethernet. We implemented a communication gateway module that supports various communication methods, and experimented with data conversion and transmission.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.8
• /
• pp.1839-1844
• /
• 2015

The low-density parity-check(LDPC) code has been adopted in many communication standards due to its error correcting performance, and the quasi-cyclic LDPC(QC-LDPC) is widely used because of implementation easiness. In the QC-LDPC decoder, a cyclic-shifter is required to rotate data in various sizes. This kind of cyclic-shifters are called multi-size circular shifter(MSCS), and this paper proposes a low-complexity structure for MSCS. In the conventional serially-placed two barrel-rotators, the unnecessary multiplexers are revealed and removed, leading to low-complexity. The experimental results show that the area is reduced by about 12%.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.10a
• /
• pp.1054-1057
• /
• 2015

Real time processing is important in the industrial field. In this paper, we implement for Modbus/RTU(Remote Terminal Unit) protocol using LabVIEW based on serial communication. In other to obtain the experimental data from torque sense and voltage/current meter, Modbus/RTU protocol is implemented by LabVIEW tool. Mechanical loss can be calculated by torque, RPM, voltage, and current. Source code consist of panel and block diagram. We confirmed these source code can be applied in industrial field.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.6C
• /
• pp.442-449
• /
• 2005

In this paper, we introduce three kinds of simplified high-speed decoding algorithms for turbo product decoder. First, A parallel decoder structure, the row and column decoders operate in parallel, is proposed. Second, HAD(Hard Decision Aided) algorithm is used for early-stopping algorithm. Lastly, P-Parallel TPC decoder is a parallel decoding scheme, processing P rows and P columns in parallel instead of decoding one by one as that in the original scheme.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2003.10a
• /
• pp.129-132
• /
• 2003

In this paper, which sees the Strong-ARM SA1110 it used the main CPU and RTP in VoIP system. It will be able to apply the information communication field it embodied. It used the Tynux_box2 with the hardware side and it composed a VOIP system. And it used the RTP which is a real-time protocol in software control portion. The development environment of the paper that used the Target board and a Linux PC for connection used the RS-232C, USB connection, Ethernet LAN. The VoIP the environment for a communication used the wave file in the substitution which changes analog signal with the digital signal. And For the communication of the both sides it used the socket. This paper explained the fact that against a general technique from the operation of VoIP system. Using the Embedded linux development board which explained an operational process of the RTP protocol.

• Journal of Digital Contents Society
• /
• v.3 no.2
• /
• pp.245-254
• /
• 2002

Currently, communication field for automation system can be divided by simple serial communication for communication between each internal devices and network base remote control system that is based on TCP/IP. In spite of great development of network, communication part for internal control is using simple RS232 base until present. Also, development techniques of system developed by object oriented program in modular programming techniques of each function unit. Currently, it developed by component base development technique that is parts unit of software. This is presented by the new alternative of software development techniques as techniques to composition independent operation unit including business logic and is connected to development of new system. Therefore, this research implemented internal communication Emulate in RS232C based on GUI that apply development techniques of component base. that is, I maked component to commnication control part between receiving and sending and, as composite it, Control part did to handling between send and receive data.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.3C
• /
• pp.286-292
• /
• 2006

Both composition and XOR are operations widely used to enhance security of cryptographic schemes. The more number of random permutations we compose (resp. XOR), the more secure random permutation (resp. random function) we get. Combining the two methods, we consider a generalized form of random function: $SUM^s - CMP^c = ({\pi}_{sc} ... {\pi}_{(s-1)c+1}){\oplus}...{\oplus}({\pi}_c...{\pi}_1)$ where ${\pi}_1...{\pi}_{sc}$ are random permutations. Given a fixed number of random permutations, there seems to be a trade-off between composition and XOR for security of $SUM^s - CMP^c$. We analyze this trade-off based on some upper bound of insecurity of $SUM^s - CMP^c$, and investigate what the optimal number of each operation is, in order to lower the upper bound.

• Proceedings of the KIEE Conference
• /
• 2003.11c
• /
• pp.975-978
• /
• 2003

본 논문에서는 주변의 잡음에 의해 통신 환경이 나쁜 시스템에서 통신의 안정성과 고속성과 원거리 통신의 구현을 중점으로 연구하였다 전동차와 같이 Serial Communication을 이용해 차량사이 통신을 하는 경우 주변의 고전압, 고전류의 잡음에 의해 통신 Packet이 파손될 수 있으며 심지어 통신 모들이 파괴되는 현상도 발생한다. 이를 위해 펄스트랜스 포머를 사용해 Hardware의 보호 뿐아니라 고속의 안정적인 통신을 현 할 수 있다. 이는 펄스트랜스 포머의 특성상 하드웨어적으로 분리된 통신선과 통신모듈로 인한 안정성과 원거리 통신을 실현 하였으며 동기통신을 통한 빠른 속도와 FM0, FM1, Manchester 부호 방식에 의한 빠르고 안정한 통신을 제공하기 때문이다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.9 no.4
• /
• pp.745-752
• /
• 2005

In this paper we propose and implement a digital part of a receiver system for identifying a moving object and its tracking position in wireless environment. We assumed UWB(Ultra Wide Band)-based communication system for target application and used serial communication method(RS-232). The proposed digital receiver consists of RS-232-type1/RS-232-type2 for input and output of serial communication, ID Detector for detecting IDs, and PISO&Buffer circuit to buffer input signals for appropriate operation of ID Detector. We implemented the digital receiver with minimal hardware(H/W) resource according to target application of UWB-based communication system. So it correlates input patterns with pre-stored patterns though repeated detecting method for multiple IDs. Since it has reference panerns in the Ve-stored form, it can detect various IDs instantly. Also we can program content and size of reference patterns considering compatibility with other systems .The implemented H/W was mapped into XC2S100PQ208-5 FPGA of Xilinx, occupied 727($30\%$) cells, and stably operated in the clock frequency of 75MHz(13.341ns).