• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.8 no.6
• /
• pp.1188-1193
• /
• 2004

So far, there have been grossly 3 types of studies on GF(2m) multiplier architecture, such as serial multiplication, array multiplication, and hybrid multiplication. Serial multiplication method was first suggested by Mastrovito (1), to be known as the basic CF(2m) multiplication architecture, and this method was adopted in the array multiplier (2), consuming m times as much resource in parallel to extract m times of speed. In 1999, Paar studied further to get the benefit of both architecture, presenting the hybrid multiplication architecture (3). However, the hybrid architecture has defect that only complex ordo. of finite field should be used. In this paper, we propose a novel approach on developing serial multiplier architecture based on Mastrovito's, by modifying the numerical formula of the polynomial-basis serial multiplication. The proposed multiplier architecture was described and implemented in HDL so that the novel architecture was simulated and verified in the level of hardware as well as software. The implemented GF(2m) multiplier shows t times as fast as the traditional one, if we modularized the numerical expression by t number of parts.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.7 no.2
• /
• pp.147-156
• /
• 1996

In this paper we proposed a beam steering equation for the planar slotted waveguide array antenna. The tilt angle measured from the rotating axis and the aperture distribution of the antenna were the most important factors for the beam steering. From the equation, we calculated the frequency and phase distribution of the aperture for any desired beam direction. And we developed a high speed control algorithm delivering the phase data to the phase shifters of a one-dimensional phased array antenna. To reduce complexity of the control circuit and the phase delivery time, we proposed the serial phase repeating method. Because of its simplicity, we expect it can be useful for a large 2- dimensional fully phased array antenna.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.24 no.12
• /
• pp.962-968
• /
• 2014

The lattice Boltzmann method(LBM) has attracted attention as an alternative numerical algorithm for solving fluid mechanics since the end of the 90's. In these days, its intrinsic unsteadiness and rapid increase in computing power make the LBM be more applicable for computing flow-induced noise as well as fluid dynamics. The lattice Boltzmann method is a weakly compressible scheme, so we can get information about both aerodynamics and aeroacoustics from single simulation. In this paper, numerical analysis on Aeolian tone noise generated by tandem-twin square cylinders in duct is performed using the LBM. For simplicity, laminar two-dimensional fluid models are used. To verify the validity and accuracy of the current numerical techniques, numerical results for the laminar duct and the cylinder flows are compared with the analytical solution and the measurement, respectively. Then, aerodynamic noise of the twin tandem square cylinders is investigated. It is shown that the aerodynamic noise from the twin tandem square cylinders can be reduced by controlling the distance between the cylinders.

• Proceedings of the KIPE Conference
• /
• 2015.07a
• /
• pp.353-354
• /
• 2015

요즘, 태양에너지를 이용하는 웨어러블 전자기기가 많이 개발되고 있다. 이런 기기들은 태양전지에 도달하는 태양빛이 달라질 때, 태양전지와 컨버터의 연결방법이 시스템 효율에 많은 영향을 끼친다. 그래서 이 연구에서 9개의 테스트 경우를 5개의 다른 태양전지와 컨버터 연결방법으로 가정하여 전체 시스템 효율을 계산하였다. 5개의 연결방법은 직렬, 병렬, cascaded 컨버터, differential power processing (DPP) 컨버터의 직렬, DPP 컨버터의 병렬연결이다. 9개의 테스트 경우에서, 태양전지에 태양빛이 균일하게 도달할 경우, 병렬연결과 DPP 컨버터의 병렬연결이 가장 높은 효율을 보여주었다. 하지만 태양빛이 불균일하게 도달할 경우, DPP 컨버터의 연결이 가장 높은 효율을 보여주었다. 컨버터의 효율을 85%로 가정하면 DPP 컨버터를 병렬로 연결했을 경우, 이상적 경우를 제외한 8개의 테스트 경우에서 전체 시스템의 평균 효율은 99.36%였다. (이 계산은 Maximum Power Point Tracking 손실을 포함하지 않았다.)

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.36 no.1
• /
• pp.55-60
• /
• 2012

This experimental study investigated the characteristics of flow-induced vibration of two elastically supported circular cylinders in a side-by-side arrangement. In particular, the characteristics of the flow-induced vibration of the two cylinders are investigated by changing the flow speed at each spacing ratio L/D (L is the space between two cylinders and D is the diameter of the cylinder). To clarify the mechanism generating the flow-induced vibration of the cylinders, the flow patterns around the two vibrating cylinders are also investigated using a flow visualization test that reproduces the flow-induced vibration of the cylinders with a forced vibration apparatus. As a result, it is clarified that the flow-induced vibration characteristics of the two cylinders arranged side-by-side switch among four patterns as the flow between the two cylinders is switched. Among the three arrangements considered (tandem, staggered, and side-by-side), the arrangement that generates flow-induced vibration of the two cylinders most easily is the side-by-side arrangement.

• Proceedings of the KIPE Conference
• /
• 2017.07a
• /
• pp.48-49
• /
• 2017

태양광 발전 시스템 구현에 있어 가장 큰 문제점 중 하나는 불균일한 태양빛 조건에서의 전체 시스템 발전량 감소이다. 이를 해결하기 위해 module-integrated converter (MIC), dc optimizer, differential power processing (DPP) 등 다양한 컨버터가 연구되고 있다. 그 중에서도 DPP 컨버터는 낮은 전력변환 손실로 높은 시스템 효율을 얻을 수 있어 최근 많은 주목을 받고 있다. 보통 그리드 연결형 태양광발전 시스템에 적용되는 직렬 DPP의 경우, 이미 많은 연구가 진행되고 있지만, 병렬 DPP의 경우 아직 많은 연구가 필요한 상황이다. 본 논문에서는 front-end 컨버터의 존재 유무에 따른 두 가지 병렬 DPP 컨버터 배열을 비교 분석 하였다. Front-end 컨버터가 적용된 병렬 DPP 컨버터 배열의 경우, dc 전압과 태양전지의 전압 차이를 최소화해 전력 변환 손실을 감소시킬 수 있지만, front-end 컨버터에서 추가적인 전력 변환 손실이 발생한다. Front-end 컨버터가 없는 경우, dc 전압과 태양전지의 전압차이가 커 DPP 컨버터에서 발생하는 전력 변환 손실이 커진다. 따라서 주어진 조건 아래 효율적인 병렬 DPP 컨버터 디자인을 위한 가이드라인을 본 논문에서 제시하고자 한다.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.52 no.4
• /
• pp.170-176
• /
• 2003

This paper introduces an improved pulse generator using power semiconductors and L-C circuit. The proposed circuit consists of the series connected boost converter structure. In the presented circuits, high voltage pulse is generated by series-connection of capacitors and IGBTs. The charging of capacitors and voltage balance of IGBTs are obtained automatically. To verify the proposed circuit, 1.8㎸, 40A pulse generator is manufactured and tested.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.7
• /
• pp.721-726
• /
• 2003

This paper present a waveguide slot 16${\times}$16 assay antenna with diaphragms for 38 GHz frequency band. Diaphragms are used to control the impedance and to minimize the return loss of the structure. A 20 dB Chebyshev array of 16 waveguide slots has been designed by optimizing the positions and sizes of the diaphragms. A serial feeding system with $\pi$- and T-junction power dividers has also designed to get a 20 dB Chebyshev power distribution. A 16${\times}$16 slot array was designed for a Fixed Wireless Access System at 38 GHz frequency band, manufactured using a computer controlled milling technique, and measured for the return -19 dB and the frequency band of 740 MHz.

• The Journal of the Acoustical Society of Korea
• /
• v.18 no.2
• /
• pp.32-39
• /
• 1999

In this paper, the characteristics of the ray tracing method (RTM) based on the cylindrical wave are discussed for the high frequency vibration analysis of two-dimensional structures. A ray tube describing the emanating cylindrical wave is used to derive the governing equation for incident reflected, and transmitted ray tubes which satisfies the condition at the coupled boundary. The suggested ray model is applied to panel array structures, and the predicted results for 2-panel, 3-panel, and 4-panel array structures are compared to those by Statistical energy analysis (SEA) and Wave intensity analysis(WIA). More enhanced prediction was obtained compared to the SEA, and similar prediction performance was observed to the WIA. Additionally, the RTM has a novel feature that it can estimate the spatially smoothed distribution of vibration energy and vibration intensity. It is expected that the present RTM can be used as one of the useful tools for the high frequency vibration analysis of two-dimensional coupled structures.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.4
• /
• pp.413-420
• /
• 2003

In this paper, the correction method of antenna beam direction errors is introduced which caused by frequency scan effect in active Phased may antenna for satellite communications. The antenna makes the beam directional error from frequency scan effect when it has dual beam may structure with asymmetrical series connection, their frequencies are different and for from each other, their 3dB beamwidth is narrow, and scan range is wide. By proposed equations, estimated beam direction error angles can be calculated and active phase shifter control values also can be calculated to compensate them. In this paper, the active phased array antenna system was fabricated to measure beam direction errors both before and after correction, which has dual beam from 32${\times}$4 main level array and 4${\times}$2 second level array, frequency deviation 500 MHz max.(6.7 %) at 7.25 GHz∼7.75 GHz ranges, 0$^{\circ}$∼${\pm}$35$^{\circ}$nm ranges, and 35.6 dBi gain with 2.2$^{\circ}$3 dB beam width. Its beam direction error by frequency san effect which was 2.5$^{\circ}$max., was reduced to 0.2$^{\circ}$max. after correction. This was 7 dB improvement of signal loss. The active phased array antenna can accurately track the target satellite for communications by this proposed correction method.