• Journal of Digital Contents Society
• /
• v.5 no.1
• /
• pp.28-34
• /
• 2004

In this paper, we have analyzed the block error probability of orthogonal multicarrier 16 QAM signal in a frequency selective Rician fading environment. The block error probability is evaluated with several parameters such as normalized propagation delay $(\gamma/T_S),$, bit energy to noise power ratio $(E_b/N_0),$ and desired signal to undesired signal power ratio (DUR) in fast fading and slow fading channels. In the fast fading channel, The result shows that the block error probability rather in the fast fading channel achieves better performance than in the slow fading channel, when the error correction capability is one or two.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.39 no.2
• /
• pp.50-55
• /
• 2002

The standard approach of image resampling is to fit the original image with continuous model and resample the function at a desired rate. We used the B-spline function as the continuous model because it oscillates less than the others. The main purpose of this paper is the derivation of a nonuniform optimal resampling algorithm. To derive it, needing approximation can be computed in three steps: 1) determining the I-spline coefficients by matrix inverse process, 2) obtaining the transformed-spline coefficients by the optimal resampling algorithm derived from the orthogonal projection theorem, 3) converting of the result back into the signal domain by indirect B-spline transformation. With these methods, we can use B-spline in the non-uniform resampling, which is proved to be a good kernel in uniform resampling, and can also verify the applicability from our experiments.

• Journal of the Korea Society of Computer and Information
• /
• v.27 no.5
• /
• pp.77-84
• /
• 2022

In this paper, we propose a novel unsupervised feature selection method. Conventional unsupervised feature selection method defines virtual label and uses a regression analysis that projects the given data to this label. However, since virtual labels are generated from data, they can be formed similarly in the space. Thus, in the conventional method, the features can be selected in only restricted space. To solve this problem, in this paper, features are selected using orthogonal projections and low-rank approximations. To solve this problem, in this paper, a virtual label is projected to orthogonal space and the given data set is also projected to this space. Through this process, effective features can be selected. In addition, projection matrix is restricted low-rank to allow more effective features to be selected in low-dimensional space. To achieve these objectives, a cost function is designed and an efficient optimization method is proposed. Experimental results for six data sets demonstrate that the proposed method outperforms existing conventional unsupervised feature selection methods in most cases.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2014.11a
• /
• pp.12-14
• /
• 2014

본 논문에서는 AZB (All-Zero Block) 검출을 이용한 조기 부호화 단위(Coding Unit, CU) 결정 방법을 제안한다. HEVC 영상 코덱의 하드웨어 구현에서 이산여현변환(DCT)는 많은 부호화 자원을 필요로 하는 과정으로 DCT 수행 이전에 블록 내의 모든 양자화 계수가 0 이 되는 영블록(All-zero Block)을 미리 검출하여 DCT 및 양자화 과정을 생략하고 CU 의 부호화 과정을 조기에 종료함으로써 부호화 복잡도를 크게 감소시키는 방법을 제안한다. 기존의 SAD (Sum of Absolute Difference) 또는 SATD (Sum of Absolute Transform Difference)에 기반하는 AZB 검출 방법은 HEVC 에서 새롭게 추가된 큰 크기의 $16{\times}16$와 $32{\times}32$ DCT 에서 AZB 을 효율적으로 검출할 수 없는 한계가 존재한다. 본 논문에서는 DCT 변환 커널이 하다마드 변환 커널과 또 다른 정규 직교 변환 커널로 분할하여 표현할 수 있는 성질을 이용하여, 부화소 움직임벡터 추정 과정을 통해 생성된 하드마드 변환 계수에 DCT 를 생성하는 변환 커널을 곱하여 DCT 변환 커널을 생성한 후 양자화 계수를 이용하여 CU 단위의 AZB 을 검출하는 방법을 제안한다. 또한 AZB 검출과 움직임 벡터의 크기를 이용하여 현재 CU 의 부호화 과정을 조기에 종료하는 방법을 제안한다. 제안하는 AZB 검출과 CU 조기 종료 부호화 방법을 사용하면 평균적으로 34.7%의 부호화 시간을 감소시켜 부호화 복잡도를 크게 줄일 수 있다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.05a
• /
• pp.883-887
• /
• 2009

This paper presents a statistical analysis of the MSE of adaptation for the MPDSAP (Maximally polyphase decomposed Subband Affine Projection) algorithm for the an autoregressive (AR) inputs with P order. In subband structure, the Affine Projection (AP) algorithm is transformed to the Normalized Least Mean Square (NLMS) algorithm by applying the polyphase decomposition and the noble identity to the adaptive filter. And also, AR input can be pre-whitened by subband filtering with the Orthonormal Analysis Filters(OAF). In the subband structure, the pre-whitening of the AR(P) inputs provides simple and valid approximations for a statistical analysis of the MSE behaviors for the SAP adaptive filter.

• Explosives and Blasting
• /
• v.35 no.4
• /
• pp.1-9
• /
• 2017

This study undertakes an evaluation of blast effect through the analysis of the contribution rate and effect that different artificial joint number, artificial joint spacing and artificial joint angle have on blast velocity. Blast velocity according to the different state of the artificial joint was obtained using AUTODYN, a dynamic analysis program. The result of the numerical analysis was subjected to further normalization analysis. For the contribution rate of design factors was analyzed using the robust design method. The orthogonal array used in the analysis was $L_9(3^4)$ and each parameters were having 3 levels. The result of normalization analysis regarding the artificial joint angle was indicated a tendency in which blast velocity decreased. The result of analyzing blast velocity regarding artificial joint spacing and artificial joint angle was indicated a tendency in which blast velocity decreased as artificial joint spacing increased when the angle was perpendicular. In the case of blast velocity contribution rates they were ranked in the descending order of artificial joint angle, artificial joint number, artificial joint spacing.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.20 no.8
• /
• pp.701-713
• /
• 2009

This paper studies a method for reducing performance degradation due to losing sub-carrier orthogonality caused by power transient between physical channels in LTE uplink transmission. The pattern of inter-carrier interference(ICI) caused by power transient is different from what has been studied for doppler shift, in that its pattern occurs at front and rear sides of channels in each period of power transient. The reason of ICI's occurrence results from power difference between channels, power transient duration, multi-path channel delay spread, and numbers of sub-carrier. New criterion is proposed to find out number of taps of multi-tap equalizer enough to improve the ICI. The scheme is to determine the number of taps of multi-tap equalizer when a normalized interference or a normalized ICI is greater than a normalized noise. Simulation results show that the number of taps is flexibly adjusted according to SNR(Signal to Noise Ratio) of a received signal to improve Bit Error Rate(BER), while the complexity of the proposed scheme is reduced down to 88 percentage of the classical method.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.45 no.6
• /
• pp.27-37
• /
• 2008

Applications of 3D data increase with advancement of multimedia technique and contents, and it is necessary to manage and to retrieve for 3D data efficiently. In this paper, we propose a new method using the sliced shape which extracts efficiently a feature description for shape-based retrieval of 3D models. Since the feature descriptor of 3D model should be invariant to translation, rotation and scale for its model, normalization of models requires for 3D model retrieval system. This paper uses principal component analysis(PCA) method in order to normalize all the models. The proposed algorithm finds a direction of each axis by the PCA and creates orthogonal n planes in each axis. These planes are orthogonalized with each axis, and are used to extract sliced shape image. Sliced shape image is the 2D plane created by intersecting at between 3D model and these planes. The proposed feature descriptor is a distribution of Euclidean distances from center point of sliced shape image to its outline. A performed evaluation is used for average of the normalize modified retrieval rank(ANMRR) with a standard evaluation from MPEG-7. In our experimental results, we demonstrate that the proposed method is an efficient 3D model retrieval.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.15 no.1
• /
• pp.61-68
• /
• 1991

The system such as railway bridge can be modelled as the restrained beam with intermediate supports. This kind of structures are subject to the moving load, which has a great effect on dynamic stresses and can cause sever motions, especially at high velocities. Therefore, to analyze the dynamic characteristics of the system due to the moving load is very important. In this paper, the governing equation of motion of a restrained beam subjected to the moving load is derived by using the Hamilton's principle. The orthogonal polynomial functions, which are trial functions and satisfying the geometric and dynamic boundary conditions, are obtained through simple procedure. The dynamic response of the system subjected to the moving loads is obtained by using the Galerkin's method and the numerical time integration technique. The numerical tests for various constraint, velocity and boundary conditions were preformed. Furthermore, the effects of mass of the moving load are studied in detail.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.17 no.7 s.124
• /
• pp.638-648
• /
• 2007

A principal components analysis of the entire median HRIRs in the CIPIC HRTF database reveals that the individual HRIRs can be adequately reconstructed by a linear combination of several orthonormal basis functions. The basis functions represent the inter-individual and inter-elevation variations in median HRIRs. There exist elevation-dependent tendencies in the weights of basis functions, and the basis functions can be ordered according to the magnitude of standard deviation of the weights at each elevation. We propose a HRIR customization method via tuning of the weights of 3 dominant basis functions corresponding to the 3 largest standard deviations at each elevation. Subjective listening test results show that both front-back reversal and vertical perception can be improved with the customized HRIRs.