• 대한설비공학회지:설비저널
• /
• 제27권3호
• /
• pp.232-242
• /
• 1998

• 대한기계학회논문집
• /
• 제12권5호
• /
• pp.1158-1174
• /
• 1988

본 연구에서는 계단형 벽면조건을 없게 하기 위해서 비직교 좌표계(non-orth- ogonal coordinate system)를 사용하여 수치해석하였다. 비직교 좌표계를 이용한 수 치해석의 예는 Thompson등이 Laplace방정식 혹은 Poisson방정식을 해석함으로써 비직 교 격자망을 구성한 바 있고, Fahgri와 Asako는 대수적 비직교 좌표변환으로 유한차분 방정식을 유도하여 비정규경계면을 갖는 관로에서의 유동특성을 해석하였으며 이재헌 과 이상렬은 Fahgri와 Asako의 방법을 비정규경계면을 갖는 밀폐공간내에서의 자연대 류의 수치해석에 적용한 바 있다. 본 해석에서도 Fahgri와 Asako의 변환법으로 유한 차분방정식을 유도하였는데, 이 방법을 사용할 경우 확대관의 경사벽면을 계단형으로 만들지 않고 유한차분방정식을 유도할 수 있어서 계단형 벽면으로 인한 해의 오차를 제거할 수 있다. Fig.2는 본 해석에서 사용한 비직교 격자망을 나타낸다.

• 한국유체기계학회 논문집
• /
• 제2권1호
• /
• pp.96-102
• /
• 1999

Cross flow fans are used in various applications, especially in industrial ventilation applications and in room air conditioners, due to their superior performance characteristics. Unlike radial and/or axial fans, the design of cross flow fans have been mostly based on earlier experiences and experiments. In the present study, numerical computations of flow fields through a cross flow fan used in room air conditioner are performed to investigate the detailed flow fields and to study the effect of the blade shape on performance curves to aid better design of the fan. Despite some discrepancies between the two results, it is seen from the present study that the computational results agree quite well with the qualitative experimental results. It is also shown from the present study that by having a different shape of blade, it is possible to achieve about $15\%$ increase in flow rates. The stimulating results of the present study can be used in the design of high performance cross flow fans with the use of optimal design algorithm and experimental verifications.

• 대한기계학회논문집B
• /
• 제37권5호
• /
• pp.503-511
• /
• 2013

연료전지 시스템에서 공급기체 가습은 연료전지 성능효율과 전해질막 수명 향상 측면에서 중요하다. 판형 막 가습기는 일반적으로 유동 방향에 따라 직교류와 대향류로 구분되고 판과 막 사이에서 고온 다습한 공기와 저온 건조한 공기의 열 및 물질전달이 이루어진다. 본 연구에서는 현열 및 잠열 ${\varepsilon}$-NTU 법을 이용하여 입구 온도와 유량 변화에 따른 열 및 물질전달 성능 변화를 유동 방향에 따라 비교하였다. 이를 통하여 저유량 일 때 대향류는 직교류 보다 열 및 물질전달 성능이 높은 것을 알 수 있었고 유량이 증가함에 따라 성능 차이가 감소되는 것을 확인할 수 있었다. 그리고 입구온도가 증가함에 따라 열전달 성능 변화는 작은 반면 물질전달 성능 변화는 비선형으로 크게 감소되는 결과를 얻었다.

• 대한기계학회논문집B
• /
• 제39권3호
• /
• pp.271-278
• /
• 2015

직교류 핀-튜브 열교환기의 대류연절달에 대해 수치해석 연구가 수행되었다. 팬위치에 따른 열전달 성능변화를 조사하기 위하여 분사와 흡입형태로서 몇 가지 팬위치가 선택되었다. 열교환기의 튜브는 엇갈림 배열이며, 튜브의 온도와 유입공기의 온도는 각각 $50^{\circ}C$와 $30^{\circ}C$이다. 해석결과로부터 3차원 유동구조가 검토되었으며, 팬의 다양한 설치 위치에 따른 대류 열전달계수와 열교환기 입출구 사이의 평균 온도차에 대한 분석을 통해 열교환기 성능을 논의되었다.

• 대한기계학회논문집B
• /
• 제41권10호
• /
• pp.667-673
• /
• 2017

공개소스 전산유체 해석 라이브러리인 OpenFOAM을 이용하여 음극 지지체형 고체산화물 연료전지의 온도균일성에 관한 연구를 수행하였다. 3가지 유형의 유동흐름(병행류, 대향류, 직교류)에 대하여 수치해석이 이루어졌다. 다공성 물질내에서의 기체의 흐름은 유효확산계수를 이용하여 계산하였고 분리판의 리브 영향도 고려하였다. 전기화학반응의 계산을 위하여 실험식으로부터 얻은 집중내부저항 모델이 사용되었다. 수치해석 결과 대향류가 가장 균일한 온도분포를 나타내었다.

• 대한기계학회논문집
• /
• 제19권8호
• /
• pp.1940-1949
• /
• 1995

A numerical study for a two dimensional multi-jet with crossflow of the spent fluid has been carried out. Three different distributions of mass-flow rate at 5 jet exits were assumed to see their effects upon the flow characteristics, especially in the jet-flow region. For each distribution, various Reynolds numbers ranging from laminar to turbulent flows were considered. Results show that a fully developed laminar flow exists above a certain Reynolds number whose exact value depends upon the mass flow rate distribution. AS the Reynolds number increases, the flow becomes transitional from downstream and finally a fully developed turbulent flow forms in the jet-flow region. The critical Reynolds number where the fully developed turbulent flow forms is quite dependent upon the distribution of mass-flow rate. One interesting result is that the distribution of the skin friction coefficient along the inpingement plate in the jet-flow region shows a consistent dependency on the Reynolds number, i.e. inversely proportional to the square root of the Reynolds number, regardless of flow regime.

• Journal of Biosystems Engineering
• /
• 제20권1호
• /
• pp.66-72
• /
• 1995

A numerical study for a two dimensional multi-impingement jet with crossflow of the spent fluid has been carried out. To study the flow characteristics especially in the jet flow region, three different distributions of mass flow rate at 5-jet exits were assumed. For each distribution, various Reynolds numbers ranging from laminar to turbulent flows were considered. Calculations drew the following items as conclusion. 1) A periodical fully developed flow was observed from the third protrusion. This was also observed from previous experimentally by Whidden at al. The Nessult number at the protrusion surface increased mildly as going downstream. 2) The low Reynolds number turbulence model of Launder and Sharma was found to be adequate for the prediction of fluid flow and heat transfer characteristics of two dimensional multi-jet configuration. 3) The Nusselt number at the protrusion surface was nearly proportional to the square root of the Reynolds number.

• 설비공학논문집
• /
• 제21권5호
• /
• pp.282-290
• /
• 2009

A ceramic monolith heat exchanger is studied to find the performance of heat transfer and pressure drop by numerical computation and $\xi$-NTU method. The numerical computation was performed throughout the domain including fluid region in exhaust gas-side rectangular ducts, ceramic core and fluid region in air-side rectangular duct with the air and exhaust in cross flow direction. In addition, the heat exchanger was also analyzed to estimate the performance by conventional $\xi$-NTU method with several Nusselt number correlations for flow in rectangular duct from literature. By comparisons of both performances by the numerical computation and the $\xi$-NTU method, the effectiveness by $\xi$-NTU method was closest to the result by numerical computation within a relative error of 2.14% when Stephan's Nusselt number correlation was adopted to the $\xi$-NTU method among the several correlations.

• Journal of Biosystems Engineering
• /
• 제20권1호
• /
• pp.58-65
• /
• 1995

A numerical study for a two dimensional multi-jet with crossflow of the spent fluid has been carried out. Three different distributions of mass-flow rate at 5 jet exits were assumed to see their effects upon the flow characteristics, especially in the jet-flow region. For each distribution, various Reynolds numbers ranging from laminar to turbulent flows were considered. Calculations drew the following items as conclusion. 1) The development of the free jets issued from downstream jets was hindered by the crossflow formed due to jets. Consequently, the free jet was developed into the channel flow without any evident symptom of impingement jet flow characteristics 2) The crossflow induced the pressure gradient along the cross section of jet exits and the value of the pressure gradient increased as going downstream. The crossflow generated also the turbulent kinetic energy as it collied with the downstream jets. 3) The skin friction coefficient along the impingement plate was affected more by the distribution of mass flow rate at jet exits rather than by the Reynolds number. The skin friction coefficient was inversely proportional to the square root of the Reynolds number, regardless of flow regime when a fully developed flow was formed in the jet flow region. 4) The distribution of the skin friction coefficient along the impingement plate was found to be controlled by adjusting the distribution of mass flow rate at jet exits.