• Journal of Korean Society of Forest Science
• /
• v.17 no.1
• /
• pp.23-28
• /
• 1973

In this survey, to estimate volume growth of pitch pine (Pinus rigida Mill) stand, diameter growth was estimated. Among 223 sample trees, the number of rejected trees was 12, about 5 percent of total sample trees. The stand showed uniform growth and rejected trees included insect-damaged trees. Compared with reports made on forest classification basis, pitch pine a single species showed faster growth. Minimum, average and maximum value of D.B.H and mean annual diameter growth, of 16 year old pitch pine stand, were as follow. The correlation of each factors estimated by 9590 of confidence interval is shown in the table of correlation as bellow.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.279.2-279.2
• /
• 2014

반도체 선폭이 20 nm급까지 감소함에 따라 기존에 수율에 문제를 끼치던 공정 외부 유입 입자뿐만 아니라, 공정 도중에 발생하는 수~수십 나노의 작은 입자도 수율에 악영향을 끼치게 되었다. 이에 따라 저압, 극청정 조건에서 진행되는 공정 중 발생하는 입자를 실시간으로 모니터링 할 수 있는 장비에 대한 수요가 발생하고 있다. Particle beam mass spectrometer (PBMS)는 이러한 요구사항을 만족할 수 있는 장비로 100 mtorr의 공정 조건에서 5 nm 이상의 입자의 직경별 수농도를 측정할 수 있는 장비이다. PBMS로 입자의 수농도를 측정하기 위해서는 PBMS 전단에서 입자를 중앙으로 집속할 필요가 있다. 공기역학렌즈는 PBMS 전단에서 입자를 집속시키기 위해 일반적으로 널리 사용되고 있는 장비로 여러 개의 오리피스로 이루어져 있다. 공기역학렌즈를 지나는 수송 유체와 입자는 이러한 연속 오리피스를 거치면서 팽창과 수축을 반복하며, 관성력의 차이로 인해 입자가 중앙으로 집속된다. 그러나 기존 공기역학렌즈는 고정된 직경의 오리피스를 사용하기 때문에 설계된 공정조건 이외에는 입자의 집속효율이 감소한다는 단점을 지닌다. 따라서 공정조건이 바뀔 경우 공기역학렌즈를 교체해야 되며, 진공이라는 환경하에서 이러한 교체는 많은 시간과 노력을 요구로 한다. 본 연구에서는 이러한 공기역학렌즈의 문제점을 해결하기 위해 다양한 공정조건에서 교체 없이 사용할 수 있는 새로운 형태의 공기역학렌즈인 조기래형 공기역학렌즈를 제안하였다. 각각의 오리피스가 중공의 직경을 변경할 수 있는 구조인 조리개의 형태로 설계되어 있어, 공정조건에 따라 중공의 직경을 변경함으로써 입자의 집속을 결정하는 요소인 Stokes number를 조절 할 수 있다. 이러한 조리개형 공기 역학 렌즈의 성능을 평가하기 위해 수치해석적인 방법을 이용하였다. 공기 역학 렌즈 전단의 압력을 0.1~10 torr까지 변화시켜가며 다양한 공정조건에서 오리피스의 직경만을 변경하여 입자 집속 가능 여부를 판단하였으며, 조리개 형태의 구조상 발생할 수 있는 leak로 인한 입자 집속 효율의 변화도 평가하였다.

• Journal of Korean Society of Forest Science
• /
• v.83 no.2
• /
• pp.254-261
• /
• 1994

This study was conducted to investigate and interpret the stand structure of Korean Red pine (Pinus densiflora) stands in Kangwon province, so as to provide basics information for effective forest management. The results obtained in this study were as follows : 1. Number of trees distribution for each diameter class have left nonsymmetrical in Gosung districts, but symmetrical distribution in Pyungchang districts. 2. Height curve for D.B.H. Distribution becames liner shape in Pyungchang districts that more higher than Gosung districts. 3. Stand volume and number of trees per ha in Pyungchang districts are higher than Gosung districts. 4. D.B.H. growth increments during recent 5 years at large D.B.H. class has much lager than low D.B.H. class. 5. Total growth increments of D.B.H., height and volume in Pyungchang districts are or the higher than Gosung districts overtimes 15 years later.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.4B
• /
• pp.323-332
• /
• 2011

In order to properly manage trees in rivers, the impact of trees on flooding and their ecological characteristics need to be considered and a plan needs to be established. The hydraulic impact by trees is reduction of conveyance and hydraulic structure's function due to overturn arising from flow force. A field pulling test was carried out to measure the critical resistance force for when trees break in order to discover the level of resistance that trees inside the river have to external force. The relevant factors for discovering the critical breaking moment for trees include tree species, which determines the external characteristic of trees, tree diameter at breast height, and tree height. In this study, the correlation between critical breaking moment and diameter at breast height were used. The tree's limit or critical breaking moment was tested using 100 shrubs and tall trees with a breast height diameter of 4.9 to 32.8 cm. It was difficult to derive a correlation between diameter at breast height and critical breaking moment when shrubs and tall trees were being considered together, but when only tall trees were considered, a consistent correlation was found between them.

• Journal of Biomedical Engineering Research
• /
• v.23 no.3
• /
• pp.181-187
• /
• 2002

The objective of the present study was to two-dimensionally investigate the characteristics of flow and wall shear stress under pulsatile flow in the aneurysm which is a local dilatation of the blood vessel for pulsatile flow. The numerical simulation using the commercial software were carried out for the diameter ratios(ratio of maximum diameter of aneurysm to the diameter of blood vessel) ranging from 1.5 to 2.5 and Womersley number, 15.47. It was shown that a recirculating flow at the bulge was developed and disappeared for one Period and the strength of vortex increased with the diameter ratio Especially. at time of 3.19s. the very weak recirculating flow was developed at the left upper sites of the aneurysm. The maximum values of the wall shear stress increased in Proportion to the diameter ratio. However. the Position of a maximum wall shear stress was the distal end of the aneurysm(z = 35mm) regardless of the diameter ratios.

• Korean Journal of Materials Research
• /
• v.9 no.9
• /
• pp.883-889
• /
• 1999

The pure Al or-(1,2,3wt%)Cu alloy internal chill with 4,6,8,12 and 15mm ø, respectively, was inserted at the center of a graphite mold with the size of 95mm ø$\times$200mm H. The molten metal with the same composition as the internal chill was poured into the mold at the pouring temperature of $750^{\circ}C$ and the cooling rates, solidified structures and chemical segregation were analyzed. The results represented that there was remarkable increased in cooling rate as well as decrease in grain size, secondary dendrite arm spacing and chemical segregation as the ratio of ingot to internal chill diameter was increased to 8. However there was a considerable drop of the internal chill effect when this ratio exceeded 8, resulting from incomplete melting of internal chills. The optimum ratio for the maximum internal chill effect of pure Al and-(1,2,3wt%)Cu allolys was 8 at the given pouring temperature.

• Journal of Korean Ophthalmic Optics Society
• /
• v.17 no.4
• /
• pp.469-476
• /
• 2012

Purpose: The purpose of this study is to investigate the changes of asphericity according to diameter and direction of the cornea. Methods: The changes of asphericity according to diameter and direction of cornea is measured by using Pentacam(Oculus Co., Germany), as targeting 57 adults (average $27.0{\pm}4.8$, 20 men, 37 women) without any ophthalmic diseases, which may be effective in eyesight, and refractive surgery. Results: As diameter increases in every direction based on the corneal vertex, asphericity has attentively increased (p<0.05), and the size of asphericity in each direction from every measured diameter showed as superior > nasal > inferior > temporal. In group comparison by nearsightness and astigmatism level, asphericity measured high when nearsightness and astigmatism levels were higher, and this appears to be statistically attentive.(p<0.05). Conclusions: Asphericity of cornea significantly increased according to increase of diameter of cornea, and as measured figure or increased quantity appeared differently in all directions based on corneal vertex, so it helps to understand shape of cornea, and considered that is the part to be considered during manufacturing and fitting of RGP lenses.

• Korean Journal of Environment and Ecology
• /
• v.17 no.3
• /
• pp.224-231
• /
• 2003

To develope reforestation methods for environmentally sound and ecological forest management, stand structure and radial growth of the trees were investigated and compared by species and study sites. Plantation forest studied on Betula costata, Betula platyphylla var. japonica and Betula davurica, was located at Jawoon-ni Nae-myeun, Hongcheon-gun and natural forest studied on Betula costata, was located at Jangjeon-ni Jinbu-myeun, Pyeungchang-gun. In 12.3 years after planting, differences of annual diameter increment among three Betula species were significant. The highest mean annual diameter increments, 7.67mm was measured in planting Betula costata, and followed by planting Betula platyphylla var. japonica and Betula davurica, and the lowest values. 4.32mm did in natural Betula costata. If planting Genus Beula in this district. Betula costata might be the best species. From these facts, massive planting of three Betula species in this district might have much problems, but might be evaluated as proper trial.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2000.11a
• /
• pp.92-97
• /
• 2000

Low-velocity impact damage of a thick pressure vessel by composite materials was studied using the modified Herzian contact radius theory. Impactors of various masses and various tup shapes were dropped freely in the range of 20m to 200mm height. With acceleration gage and strain gage installed on the impactor, impact force and acceleration and Contact radius were measured. After a test, the samples were radiographed to scan the state of damage. Compared with hemispherical tup of 12.7mm diameter, the contact radius of hemispherical tup of 25.4mm diameter was bigger. And the experimental data and the theoretical data was different due to the mechanical properties difference. The acceleration value was changed linearly according to the height.

• Journal of Wetlands Research
• /
• v.21 no.4
• /
• pp.298-304
• /
• 2019

In this paper, the analytical method to derive wind fragility for urban street tree in Korea was shown. Monte Carlo Simulation method was used to determine the probability of failure for urban street tree. This probability result was used to determine wind fragility parameters for four types of tree based on the study of street tree species in urban area in Daegu, Korea. Wind fragility for street tree was presented in terms of median capacity and standard deviation of the natural logarithm of the capacity. Results showed that the dominant factor affecting the probability of failure of tree under wind load was their diameter. Moreover, amongst the four types of tree chosen, the tree with height 7m and diameter 35cm had the lowest probability of failure under wind loading, whereas the tree with height 8m and diameter 30cm could resist the least wind loading. The median failure wind speed for urban street tree with height 7m were 43.8m/s and 50.6m/s for diameter 30cm and 35cm, respectively. Also, for tree with height 8m, their median failure wind speeds were 38.7m/s and 45.4m/s for tree with diameter 30cm and 35cm, respectively.