• Journal of Korean Society of Forest Science
• /
• v.84 no.1
• /
• pp.71-76
• /
• 1995

This study on Pinus desiflora in Kangwon Province has been performed for the purpose of classifying its growth area by geographical factors. To classify its growth area, the basic data which had were the measured values for annual ring width from cores were used. Individual variations in the measured values were removed through the standardization. Regional mean chronologies were estimated from the standardized values. The growth area was classified by the cluster analysis on the basis of the regional mean standardized indices. The results of this study shown that annual growth patterns to be clustered similar to geographical distribution in Kangwon Province. And the regional variations of annual growth patterns in the western part of Kangwon province were greater than those in the eastern part of Kangwon province.

• Journal of Korean Society of Forest Science
• /
• v.34 no.1
• /
• pp.57-62
• /
• 1977

Der Zuwachs des Durchmessers des Einzelbaumes kann durch die Differenzialgleichung dx/dt=k(M-x)+f(t) beschrieben werder, wobei f(t) die von den zuf$\ddot{a}$lligen $\ddot{A}$nderungen der Umwelt bedingte Fluktuation des Wachstums bedeutet. Nach dieser Gleichung kann das Wachstum des Durchmessers des Einzelbaumes in zwei Teile zerlegt werden: der erste systematische Teil k(M-x) repr$\ddot{a}$sentiert den Trend des Wachstums und der zweite Teil die Fluktuation f(t), die f$\ddot{u}$r die Wald bewirtschaftung von Praktischer Bedeutung ist. Die Studie zeigt die mathematische Ableitung zur Bestimmung von f(t).

• Journal of Korea Foresty Energy
• /
• v.1 no.2
• /
• pp.20-27
• /
• 1981

Populus alba x glandulosa shows greater growth performance in the lower part of the hill than in the upper part. In order to study this reason, correlation between the soil factors and the growth was examined. The results were as follows. 1. Annual mean height growth was 1.29m in foot hill but 0.7m in upper part, showing 184$\%$ better growth in the foot hill than in the upper part and the similar situation was shown in the diameter growth. The longer slope distance, the better growth: generally the good growth shows in the first harf of the distance. 2. High positive correlation shows between the growth performance and soil moisture: r=0.76 in the hight and r=0.71 in the diameter, and also positive correlation between soil depth and the growth performance. r=0.65 in the height and r=0.79 in the diameter. On the other hand, negative correlation between the slope and soil depth are considered as limiting factors to the growth. 3. A significant correlation appeared between growth performance and organic matter and between the growth performance and total nitrogen as well. This shows that the nutrient elements were contained much in the foot hill. 4. The correlation between the height growth and potassium, and between the growth and calcium and pH were shown . 5. However, no correlation was shown between the growth and available phosphate, magnesium and available managanese .

• Korean Journal of Environment and Ecology
• /
• v.17 no.3
• /
• pp.224-231
• /
• 2003

To develope reforestation methods for environmentally sound and ecological forest management, stand structure and radial growth of the trees were investigated and compared by species and study sites. Plantation forest studied on Betula costata, Betula platyphylla var. japonica and Betula davurica, was located at Jawoon-ni Nae-myeun, Hongcheon-gun and natural forest studied on Betula costata, was located at Jangjeon-ni Jinbu-myeun, Pyeungchang-gun. In 12.3 years after planting, differences of annual diameter increment among three Betula species were significant. The highest mean annual diameter increments, 7.67mm was measured in planting Betula costata, and followed by planting Betula platyphylla var. japonica and Betula davurica, and the lowest values. 4.32mm did in natural Betula costata. If planting Genus Beula in this district. Betula costata might be the best species. From these facts, massive planting of three Betula species in this district might have much problems, but might be evaluated as proper trial.

• Journal of Korean Society of Forest Science
• /
• v.100 no.1
• /
• pp.1-7
• /
• 2011

The objective of this study was to improve the performance of the existing individual-tree/distantindependent stand growth model in predicting the growth of Pinus koraiensis forest stands. The parameters of diameter growth and mortality prediction models were estimated using periodic annual increment (PAI) of permanent plots and the performance of the models were compared with that of the existing ones using mean anuual increment (MAI). The diameter growth model includes crown ratio, potential diameter growth and modifier to compute for competitions of trees of a stand. In deriving the mortality prediction model, the parameters were estimated based on PAI which was also estimated as the function of MAI due to the lacking of permanent plot data. The results of this study showed that the newly-estimated functions based on PAI provide more realistic patterns in diameter growth of individual trees. The new approach using PAI in mortality model seems to overcome the over-estimate problem by the MAI-based model in estimating mortality of stand trees.

• Journal of agriculture & life science
• /
• v.43 no.3
• /
• pp.7-14
• /
• 2009

Some results of the 5th Korean National Forest Inventory Program measured in 2007 were used to analyze annual diameter growth characteristics for major tree species distributed in Chungnam province. A total of 717 sample trees from 49 plots distributed in Chungnam province were measured and analyzed for annual diameter growth characteristics. As stand age and stand density increased, annual diameter growth rates for major species tended to decrease. The species of Prunus sargentii(2.14mm/yr) showed the best annual diameter growth rates and the others are Quercus serrata(2.10mm/yr), Pinus thunbergii(2.03mm/yr), Pinus densiflora(1.91mm/yr), and Castanea crenata(1.90mm/yr) in order. This information could be very useful to understand annual diameter growth characteristics for major species distributed in Chungnam province.

• Journal of Korean Society of Forest Science
• /
• v.100 no.1
• /
• pp.62-69
• /
• 2011

Six commonly used non-linear growth functions were fitted to individual tree height-dbh data of eight major tree species measured by the $5^{th}$ National Forest Inventory in Chungcheong province. A total of 2,681 trees were collected from permanent sample plots across Chungcheong province. The available data for each species were randomly splitted into two sets: the majority (90%) was used to estimate model parameters and the remaining data (10%) were reserved to validate the models. The performance of the models was compared and evaluated by $R^2$, RMSE, mean difference (MD), absolute mean difference (AMD) and mean difference(MD) for diameter classes. The combined data (100%) were used for final model fitting. The results showed that these six sigmoidal models were able to capture the height-diameter relationships and fit the data equally well, but produced different asymptote estimates. Sigmoidal growth models such as Chapman-Richards, Weibull functions provided the most satisfactory height predictions. The effect of model performance on stem volume estimation was also investigated. Tree volumes of different species were computed by the Forest Resources Evaluation and Prediction Program using observed range of diameter and the predicted tree total height from the six models. For trees with diameter less than 30 cm, the six height-dbh models produced very similar results for all species, while more differentiation among the models was observed for large-sized trees.

• Journal of Korean Society of Forest Science
• /
• v.90 no.1
• /
• pp.105-112
• /
• 2001

This study was carried out to analyze the genetic variation and to estimate both heritabilities and genetic gains for height and diameter growth of 20-year-old open-pollinated progenies of Korean white pine in three different sites. For there, analysis of variance for both height and diameter growth was conducted to see if there exist significant differences among families, sites, blocks, and their interactions exist or not and to analyze the variance components for each factor. Mean height and diameter at Gapyeong site were 7.65m and 11.92cm, respectively. they were 7.42m and 11.35cm at Gwangiu site, 6.13m and 8.41cm at Youngdong site, and 7.12m and 10.68cm for the overall sites. The family No. 20 showed the most excellent growth of 7.99m in mean height and 12.14cm in mean diameter for all sites surveyed. The estimates of heritabilities for individual-tree and family were, 0.35~0.73 and 0.65~0.83 for height growth, and 0.12~0.40 and 0.46~0.75 for diameter growth, respectively. For the combined data from all the sites, the estimates of individual tree heritability were 0.60 for height and 0.20 for diameter, and those of family were 0.91 for height and 0.77 for diameter. Heritability estimates varied with testing sites, and those for height were higher than those for diameter in all sites. Given equal intensity of selection, combined selection method provided the most efficient genetic gains for both height and diameter growth.

• Journal of Korean Society of Forest Science
• /
• v.62 no.1
• /
• pp.87-95
• /
• 1983

The effects of the pine needle gall midge, Thecodiplosis japonensis, on the growth of the Korean red pine, Pinus densiflora, were examined for the natural forest stands at nine locations: Seocheon-gun, Boryong-gun, and Hongseong-gun in Chooncheongnam-do, where consequence of the infestation had been different. To estimate the economic threshold level of the pine needle gall midge, the growth impacts due to the insect were examined with terminal shoot growth, and cambial growth by analyzing the growth horizontally and vertically. The results obtained are as follows: 1) In general, the growth impacts of the red pine trees were significant for the five consecutive years since damage had occurred, and its maximum retardation was shown in the second and the third years. 2) Simultaneous retardation occurred in both terminal and cambial growth of the tree, probably due to cumulative characteristics of the feeding behaviour. 3) Strong correlation was found between terminal and cambial growth of Korean red pine and this was true for the trees infested by pine needle gall midge. Thus retardation in cambial growth due to the insect may be estimated with that in terminal growth. 4) Infestation was greater on slope facing north than south even though the history of the infestation had been similar. 5) The stem volume of 13-year-old, infested Korean red pine was reduced by more than 75-85%, compared to same aged, uninfected pine in yield table. Thus, much longer period is required to recover the normal growth.

• Journal of Forest and Environmental Science
• /
• v.13 no.1
• /
• pp.66-80
• /
• 1997

Pinus koraiensis is one of the major speciese which have been recently planted for ten years and consists of 31% of total plantation. Presently young stand less than 30 years consists of 87% of total forest, but tending thinning of it is hardly carried out and the desirable direction for the thinning is not established yet. The objective of the study is to introduce the optimum thinning plan and thinning method through the long-run experiment of tending thinning for the Pinus koraiensis stand. The experiments carry out to interprete its growth model on the subject of two thinning experimental plots and yield table of Pinus koraiensis. As the basic step for understanding the thinning process, a theoretical growth model which is suitable to express the growth process is required. For that purpose, three growth functions (Mitscherlich, 4 parameter Richards, 3 parameter Richards) are applied to the diameter growth of the sample trees which are taken in the two plots. The results show that 3 parameter Richards is the most suitable. It is also verified that the diameter growth, the height growth, and the decrease in the number of stocks can be estimated by this function. To estimate the growth change of single tree, growth model including parameter h which is related to the occupation area of single tree are introduced. The parameter h can be estimated by using the data of the diameter growth obtained from the established experimental plots. Therefore, if both verification and modification of the usefulness of the model suggested is made, equations which tell about the thinning effects could be drived by estimating the growth process of single tree in advance.