• Journal of Wetlands Research
• /
• v.15 no.3
• /
• pp.423-430
• /
• 2013

An algorithm to allow shoreline movement during numerical experiment on sediment transport, deposition or resuspension for general coastal morphology is proposed here. The bed slope near shoreline, i.e. mean sea level, is influenced by bed material, tidal current, waves, and wave-induced current, but has been reported to remain within a stable range. Its annual variation is not large, either. The algorithm is adjusting the bathymetry, if the largest bed slope within shoreline band exceeds a given bed slope due to continuous erosion at zones below the shoreline. This algorithm automatically describes retreat of shoreline caused by erosion, when used within a numerical system. The algorithm was tested to a situation which includes a continuous dredging at a point, and showed satisfactory development of concentric circle contours. Next, the algorithm was tested to another situation which includes sinking of eroded part of bed plate, and produced satisfactory results, too. Finally, the algorithm was tested to a movable-bed laboratory experimental conditions. The shoreline movement behind detached breakwater was reasonably reproduced with this algorithm.

• Journal of Korean Society for Geospatial Information Science
• /
• v.1 no.2 s.2
• /
• pp.83-96
• /
• 1993

The orthophto map is seen as the form of picture with the uniform reduced scale as the current terrain map. Thus it provides a reasonable feeling of scene and is easy to be interpreted. Furthermore, digital orthophoto is currently used as the basic terrain information data of the Geo-Spatial Information System(GSIS). Therefore, the orhtophoto map has high potential use as a future terrain map. This paper studies the method of producing orthophoto map by using the digital satellite imagery data taken from SPOT satellite of France. The production of orthophoto map requires the process of generating orthophoto imagery with digital elevation model, which process is called digital differential rectification. As the final accuracy of orthophoto map depends on that of digital elevation model, the precise and efficient production method of digital elevation model should be preceded. This study investigated the method of producing digital elevation model directly from SPOT satellite imagery and generated ortho-image by resampling the original SPOT imagery through digital differential rectification. Finally, Simple orthophoto map was made by overlaying the ortho-image and the contour map from digital elevation model.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.36 no.2
• /
• pp.59-66
• /
• 2018

This study examined the correlation among topography, forest type, soil and geology in Inje area where landslides occurred during heavy rainfall from July 11 to July 18, 2006 to assess the landslide susceptibility. In order to assess the susceptibility of future landslides, landslides occurred in Inje area were classified into slide type and flow type, and slope angle, aspect, curvature, ridge and valley were extracted from the area. The landslide susceptibility was assessed by applying diameter class, age class, density, and forest type to Bayesianbased LR (Logistic Regression) model and WOE (Weight of Evidence) model, and the fitness of modeling was verified by predict rate curve. As the results of susceptibility assessment, using all landslides without no distintion, it was found that 75% of the LR model and 73% of the WOE model were fit in terms of the top 20% of the landslides. According to slide type and flow type in the top 20% of the landslides, it was found that 71% of the LR model and 69% of the WOE model were fit in terms of the slide type. Whereas, it was found that 86% of the LR model and 82% of the WOE model were fit in terms of the flow type. That is, the results of the LR model showed higher fitness than the results of the WOE model, and the fitness of the flow type was higher than that of the slide type. Consequently, it suggests that it is reasonable to assess and verify the landslide susceptibility according to the types of landslides.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.23 no.4
• /
• pp.283-294
• /
• 2021

Solar radiation is an important meteorological factor in the agricultural sector. The ground exposed to sunlight is highly influenced by the surrounding terrains especially in South Korea where the topology is complex. The solar radiation on an inclined surface is estimated using a solar irradiance correction factor for the slope of the terrain along with the solar radiation on a horizontal surface. However, such an estimation method assumes that there is no barrier in surroundings, which blocks sunlight from the sky. This would result in errors in estimation of solar radiation because the effect of shading caused by the surrounding terrain has not been taken into account sufficiently. In this study, the shading effect was simulated to obtain the brightness value (BV), which was used as a correction factor. The shaded relief images, which were generated using a 30m-resolution digital elevation model (DEM), were used to derive the BVs. These images were also prepared using the position of the sun and the relief of the terrain as inputs. The gridded data where the variation of direct solar radiation was quantified as brightness were obtained. The value of cells in the gridded data ranged from 0 (the darkest value) to 255 (the brightest value). The BV analysis was performed using meteorological observation data at 22 stations installed in study area. The observed insolation was compared with the BV of each point under clear and cloudless condition. It was found that brightness values were significantly correlated with the solar radiation, which confirmed that shading due to terrain could explain the variation in direct solar radiation. Further studies are needed to accurately estimate detailed solar radiation using shaded relief images and brightness values.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.25 no.6_2
• /
• pp.645-651
• /
• 2007

In general, contours in digital vector maps, which represent terrain characteristics and shape, are created by 3D digitizing the same height points using aerial photographs on the analytical or digital plotters with stereoscopic viewing. Hence, it requires lots of task, and subjective decision and experience of the operators. DTMs are generated indirectly by using contours since the national digital maps do not include digital terrain model (DTM) data. In this study, model key points which depict the important information about terrain characteristics were extracted from the contours. Further, determination of the efficient and flexible grid sizes were proposed to generate optimal DTM in terms of both quantitative and qualitative aspects. For this purpose, a progressive sampling technique was implemented, i.e., the smaller grid sizes are assigned for the mountainous areas where have large relief while the larger grid sizes are assigned for the relatively flat areas. In consequence, DTMs with multi-grid for difference areas could be generated instead of DTMs with a fixed grid size. The multi-grid DTMs reduce computations for data processing and provide fast display.

• Journal of Korean Society for Geospatial Information Science
• /
• v.16 no.1
• /
• pp.83-93
• /
• 2008

The topographic effect is one of the most important component in the solution of the geodetic boundary value problem (geodetic BVP). Therefore, topographic effect should be considered properly for developing the precise geoid model, especially for the area where contains many mountains like Korea. The selection of gravity reduction method in the context of the precise geoid determination depends on the magnitude of its indirect effect, the smoothness and magnitude of the reduced gravity anomalies, and their related geophysical interpretation. In this study, Korean digital elevation model with 100m resolution was constructed and topographic effect was calculated by three reduction methods as like Helmert condensation method and RTM method and Airy-isostatic reduction method. Through the analysis of computation results, we can find that RTM reduction method is the best optimal method and the results shows that gravity anomaly and indirect effect of geoidal height are $0.660{\pm}13.009mGal$, $-0.004{\pm}0.131m$ respectively and it is the most gentle slow of the three methods. Through this study, it was found that the RTM method is better suitable for calculating topographic effect precisely in context of precise geoid determination in Korea than other reduction methods.

• The Journal of the Petrological Society of Korea
• /
• v.14 no.1
• /
• pp.24-37
• /
• 2005

In this study we examined the geomorphological and geological characteristics of the granite landforms in the Iksan area. Moreover we investigated the source areas of stones which are used to build the Mieruksaji west stone pagoda. Joint is most identifiable geomorphological and geological structure in the Iksan area. Direction of J1 joint appears to be N71°E∼EW, and that of J2 joint ranges N20°W∼N20°E. Cross-pattern joint is predominant in the study area, and linen.-pattern vertical joint is also observed. Tor and corestone are easily found as geomorphological features in the study area. Corestones forming for are almost 2∼3 m across and 2∼3 m or over 5 m high. Their hardness is mainly of hammer bounce. Tower-type and castle-type of for are characteristic in the Mireuksan granites. Other geomorphological features such as tafoni, gnamma are also observed in the study area. Petrographical and geochemical features of the stones used for the Mireuksaji west stone pagoda are compared with those of the granites cropped out nearby, and indicate that the stones from the Mieruksaji west stone pagoda are quite similar to the Mireuksan granites. In the Mireuksan we can easily find lots of old traces for rock cutting.

• The Journal of Engineering Geology
• /
• v.19 no.3
• /
• pp.373-387
• /
• 2009

Many cultural heritages with various periods including the 'Three Kingdoms Period' were discovered in Chulmamyeon, Busan. Detailed geomorphological and geological investigation was performed due to archaeological importance of the study area. Aerial photographic analysis for geomorphology and analysis of vertical sedimentary sections to interpret the sedimentary characteristics were carried out. Many pebbles with specific features were discovered during the investigation. The characteristics and origin of the pebbles are analysed based on their size, rock type and shape. The study area is located in a relatively low and gentle slope compared with neighboring regions. The strong N-S trending lineaments may influence the topographic features and the distribution of wells discovered in this area. The exposed sections during excavation are divided into several layers depending on colors and materials included. Some of the layers may be developed not by nature but by human activities. The similarity of the pebbles indicates that these pebbles may artificially be collected or produced for a specific purpose. This study shows that geomorphology and geology can be important in location and development of archaeological sites. The analysis and interpretation for the origin of the pebbles indicates that geological studies can be helpful to interpretation of archaeological studies.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.37 no.6
• /
• pp.96-105
• /
• 2010

This study identified the dynamic process of sandbar and vegetation distribution of the sandbar on the Tan-cheon River. The study area is located in the lower reaches of the Tan-cheon River that has been managed as an Ecosystem Reserve Area since 2002. For the study, the geomorphological process was analyzed through mapping analysis using a satellite image followed by analysis of the vegetation distribution through an on-site survey. The major findings were as follows : First, In the fluvial geomorphic process, various kinds of sandbars were developed in 1990s, the morphologic characteristics changing continuously. Second, In the distribution of vegetation on the sandbar, the sandbar shore was covered with bare sand substrate or intermittent annual vegetation because of the periodic fluctuation of the water-level due to intensive disturbances. Third, In the relationship between the sandbar formation and vegetation, four types of sandbars were classified: channel-shore stable bar, channel-shore unstable bar, mid-channel stable bar and mid-channel unstable bar, according to the fluvial disturbance & vegetation process. The study verifies that the vegetation distribution is reciprocally related to the geomorphological process. Accordingly, it is meaningful in the selection of plant species and the planting area of the sand bar. However, it is limited to the planting guidelines on river restoration projects. More diverse on-site experimental studies should be conducted.

• Journal of Korean Society for Geospatial Information Science
• /
• v.19 no.3
• /
• pp.107-114
• /
• 2011

In this study, when interpreting leakage using the concept of geographical dispersion based on grid, to choose an appropriate spatial resolution, the statistical characteristics of drainage path length and the pattern of change of hydrodynamic parameters have been observed. Drainage path length has been calculated using an 8-direction algorithm from digital elevation model, from which the hydrodynamic parameters of the watershed were estimated. The scales of topographical map for this analysis are 1:5,000 and 1:25,000, appling grid sizes 5, 10, 15, 20 m and 20, 30, 50, 100, 150, 200 m, respectively. As results of this analysis, depending on the scale of stream networks, the statistical characteristics of drainage path length by spatial resolution and hydrodynamic parameters of the watershed have been changed. Based on the above results, when interpreting leakage using the concept of the geographical dispersion based on grid, in the case of 1:5,000 scale topographical map, a spatial resolution of 5 m will be better showing geographical and hydrodynamic characteristics to apply to the well developed stream network in basins, spatial resolution of 5~20 m to the less developed stream network in basins. And in the case of 1:25,000 scale topographical map, spatial resolution below 50 m is more desirable to show above two characteristics to apply to both cases.