• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.29 no.5
• /
• pp.543-550
• /
• 2011

The gravity anomaly is a basic geophysical data applied in various fields such as geophysics, geodesy and national defense. In general, the gravity anomaly is used through a interpolation process based on the constructed database. The gravity variation, however, is appeared in various shapes depending on the topography and the density of the underground structures. Therefore, the interpolation could lead to a large differences if the gravity fields do not satisfy the assumptions on the signal behavior like linear or a certain degree polynomials. Furthermore, the interpolation does not reflect the physical characteristics of the gravity such as the harmonic condition. In this study, the gravity modeling using the plane Fourier series and radial basis functions are performed to overcome the problems in the usual interpolation. The results of the modeling is analyzed for the case of the gravity referenced navigation focused on the signal characteristics. Based on the study, it was found that the results from modeling are not much different to that from the interpolation in a smoothly varied area. In case of the highly varied area, however, a large differences are appeared among the three methods. Especially, the Fourier series shows the most smooth variations in the modeled gravity values while the highest variations appeared in the interpolation. Applying to the gravity referenced navigation, it was found that the modeling is more effective in calculation cost. It is considered that the results from this study provides a basis on effective modeling of the gravity fields in terms of the signal characteristics and resolution for various application fields.

• Economic and Environmental Geology
• /
• v.30 no.1
• /
• pp.67-77
• /
• 1997

Seismic data from Lake Tanganyika indicate a complex tectonic, structural, and stratigraphic history. The Lake Tanganyika rift consists of half grabens which tend to alternate dip-direction along the strike of the rift. Adjacent half-grabens are separated by distinct accommodation zones of strike-slip motion. These are areas of relatively high basement, and are classified into two distinct forms which depend on the map-view geometry of the border faults on either side of the accommodation zone. One type is the high-relief accommodation zone which is a fault bounded area of high basement with little subsidence or sediment accumulation. These high-relief areas probably formed very early in the rifting process. The second type is the low-relief accommodation zone which is a large, faulted anticlinal warp with considerable rift sediment accumulated over its axis. These low-relief features continue to develop as rifting processes. This structural configuration profoundly influences depositional processes in Lake Tanganyika. Not only does structures dictate where discrete basins and depocenters can exist, it also controls the distribution of sedimentary facies within basins, both in space and time. This is because rift shoulder topography controls regional drainage patterns and sediment access into the lake. Large fluvial and deltaic systems tend to enter the rift from the up-dip side of half-grabens or along the rift axis, while fans tend to enter from the border fault side.

• Journal of the Korean association of regional geographers
• /
• v.5 no.2
• /
• pp.133-142
• /
• 1999

The wetland is very important ecologically as a habitat of diverse organisms. The purpose of this paper is to elucidate the morphogenetic environment of Jilmoe Bog found in the Odae Mountain National Park Jilmoe Bog is located in the high etchplain(1,060m) where Daebo Granite which had intruded in Jura epoch of Mesozoic era has weathered deeply and has uplifted in the Tertiary. The annual mean temperature of study area is $5.3^{\circ}C$, the annual precipitation is 2,888mm. The minimun temperature of the coldest month(january) is below $-30^{\circ}C$ and the depth of frozen soil is over 1.6m. Jilmoe bog consists of a large bog and a small bog. The length of the large bog is 63m and its width is 42m. The basal surface of Jilmoe bog is uneven. Jilmoe bog is a string bog fanned due to frost actions. In String bog, its surface is wavy with stepped dry hills and net-like troughs crossing hill slope. It seems that string bog is related to the permofrost or seasonal permofrost of cold conifer forest(taiga) zone(where the depth of frozen soil is very deep in the least in winters). String bog is a kind of thermokarst that frozen soil thaws differentially locally in declining permofrost and ground surface becomes irregular. There is turf-banked terracette of width $30{\sim}40cm$ in the headwall of small cirque-type nivation hollow formed at footslope of Maebong mountain around Jilmoe bog. This turf-banked terracette is formed by the frost growth of soil water below grass mat in periglacial climate environment. Where water is plentiful such as a nivation follow${\sim}$valley corridor and a headwall of valley, turf patterned grounds of width $30{\sim}50cm$ are found. This turf patterned ground is 'unclassified patterned ground', earth hummock. In conclusion, Jilmoe bog is a string bog of thermokarst that the relief of ground surface is irregular according to locally differentially thawing of permofrost(frozen soil). Jilmoe bog is high moor, its surroundings belongs to periglacial environment that turf-banked terracette and turf patterned ground are fanned actively.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.24 no.1
• /
• pp.123-130
• /
• 2006

The purpose of the paper is to make the three dimensional road simulation model based on the digital photogrammetry and GIS techniques in the middle of Halla mountain of Jeju island. To do this, we generate DEM (digital elevation model) and digital ortho image using GIS tools such as Arc View, Imagestation and MGE module. In GIS, the overlay map schemes combining of the hill shade, the land slope and aspect were applied. Based on the processes, we can build the best three dimensional road line along the hill side of the island. From the results, we also found that the derived DEM from digital ortho image and the GIS technique were very useful for choosing the best three dimensional road design before the real road construction works in Jeju island.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.17 no.1
• /
• pp.1-12
• /
• 2014

Crown fire, the main propagation type of large forest fire, has caused extreme damage with the fast spread rate and the high flame intensity. In this paper, we developed the probability equation to predict the crown fires using the spatial features of topography, fuel and weather in damaged area by crown fire. Eighteen variables were collected and then classified by burn severity utilizing geographic information system and remote sensing. Crown fire ratio and logistic regression model were used to select related variables and to estimate the weights for the classes of each variables. As a results, elevation, forest type, elevation relief ratio, folded aspect, plan curvature and solar insolation were related to the crown fire propagation. The crown fire propagation probability equation may can be applied to the priority setting of fuel treatment and suppression resources allocation for forest fire.

• Geophysics and Geophysical Exploration
• /
• v.23 no.4
• /
• pp.253-260
• /
• 2020

The five-story stone pagoda in Tamni-ri located in Uiseong County in Gyeongsangbuk-do had an unstable upper structure, and the structural deformation of the foundation stone and the stylobate was severe. In order to repair the base of the pagoda, it must be confirmed if there are support stones inside the base. Resistivity survey was performed to study the inner base stone structure during the repair work. The stylobate was exposed soil and broken stones after removing the walls and the cover of the stylobate. Modified pole-dipole array II was used for the resistivity survey, and compared with the typical pole-dipole array method. And in this study, a physical scale-down model experiment was performed to compare and analyze distortions caused by severe topographical undulations such as right-angled lines. The results show that the stylobate of Five-story Stone Pagoda in Tamni-ri Uiseong has base stones inside the reinforced filling soil and are located beneath the pillar of the body and supporting the pagoda.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.13 no.1
• /
• pp.121-130
• /
• 1993

The major objective of this study is to develop practical methods for estimating sediment yield rates of medium size watersheds of which areas range from 200 to $2,000km^2$. For this purpose, this study adopts an empirical method of statistical approach and another empirical method of weighting the watershed characteristics factors. A total of 13 data points for sediment yield rate, including five data points from reservoir deposit data and eight data points from sampled river-sediment data have been collected. Meanwhile, seven factors that may affect the sediment yield rate of a watershed have been selected. They are drainage density, rainfall erosivity, ground cover and land use, soil erodibility, topography, river-bed material characteristics, and watershed area. In the companion paper following this paper, methods for estimating sediment yield rate are to be developed using the 13 data points collected and seven watershed characteristics factors selected in this study.

• Journal of the Korean earth science society
• /
• v.26 no.3
• /
• pp.276-282
• /
• 2005

The Quaternary palynoflora from Cheongsu core, drilled on the western part of the Jeju Island, consists mainly of deciduous broad-leaved angiosperms and herbs. Dominant taxa are Pinaceae, Alnus, Castanea/Castanopsis, Ulmus/Zelkova, Chenopodiaceae and Compositae. Based on palynofloral composition, two palynostratigraphic zones are recognized. Zone I is characterized by a predominance of Alnus and Chenopodiaceae, and by the abundance of herbs. Zone II is dominated by conifers and deciduous broad-leaved angiosperms, including Abies, Taxodiaceae-Cupressaceae-Taxaceae, Ulmus/Zelkova and Gramineae. The Cheongsu palynoflora can be correlated with Alnipollenites(Alnus)-Chenopodipollis(Chenopodiaceae)-Compositae Assemblage Zone of the East China Sea and is assigned to the Pleistocene in age. Ecology of main taxa and comparison with the present vegetation of Korea suggest a cool temperate climate and a low relief in the Jeju Island during the deposition of the Cheongsu core sediments.

• The Journal of Engineering Geology
• /
• v.16 no.4 s.50
• /
• pp.327-335
• /
• 2006

Three processing strategies of seismic refraction data are tested in terms of velocity and depth profiles or structures for mapping of geological discontinuities: GRM(generalized reciprocal method), GLI(generalized linear inversion), Tomography. The test data used in this study are the shot gathers reconstructed by numerical modeling for the structures of 3 planar layers(horizontal, inclined), the buried vertical fracture zones, and vertical fault zones. Tomography is shown to be very efficient for mapping of more complicated tone such as vertical fault and buried fracture zones, whereas GRM and GLI can be useful for horizontal and/or inclined layers, probably on their bases of analysis of first arrivals in travel time curves.

• Journal of The Geomorphological Association of Korea
• /
• v.15 no.2
• /
• pp.25-35
• /
• 2008

Typhoon Ewiniar and Bilis followed by heavy rainfall in July 2006 triggered massive slope failures and debris flows along the Osaek valley within Seoraksan National Park. Since national road 44 is constructed along the fault-line, the susceptibility of hazard in the area is very high. Debris flows in Osaekcheon are mobilized from landslides near the ridgelines and peaks when heavy rainfall elevates pore pressure and adds weight to the hillslopes, causing failure. Stream flows falling onto the existing colluvium or channel-margin deposits also trigger debris flows. Steep slopes constructed along the road and thin regolith in the slope is the main reason for the landslide in the upper stream. In middle reaches of stream, under-fit drainage utilities and narrow bridges cause the overflow, this then triggers debris flow. Overflowing and erosion in the channel margin deposits is main reasons for the debris flow. The intensities and frequencies of heavy rainfall are certain to increase, so early warning and management system for the landslide-related hazard is urgently needed.