• Economic and Environmental Geology
• /
• v.55 no.5
• /
• pp.541-550
• /
• 2022

A pre-existing landform is created by weathering and erosion along the bedrock fault and the weak zone. A neotectonic landform is formed by neotectonic movements such as earthquakes, volcanoes, and Quaternary faults. It is difficult to clearly distinguish the landform in the actual field because the influence of the tectonic activity in the Korean Peninsula is relatively small, and the magnitude of surface processes (e.g., erosion and weathering) is intense. Thus, to better understand the impact of tectonic activity and distinguish between pre-existing landforms and neotectonic landforms, it is necessary to understand the development process of pre-existing landforms depending on the bedrock characteristics. This study used a two-dimensional numerical landscape evolution model (LEM) to study the spatio-temporal development of landscape according to the different erodibility under the same factors of climate and the uplift rate. We used hill-slope indices (i.e., relief, mean elevation, and slope) and channels (i.e., longitudinal profile, normalized channel steepness index, and stream order) to distinguish the difference according to different bedrocks. As a result of the analysis, the terrain with high erosion potential shows low mean elevation, gentle slope, low stream order, and channel steepness index. However, the value of the landscape with low erosion potential differs from that with high erodibility. In addition, a knickpoint came out at the boundary of the bedrock. When researching the actual topography, the location around the border of difference in bedrock has only been considered a pre-existing factor. This study suggested that differences in bedrock and various topographic indices should be comprehensively considered to classify pre-existing and active tectonic topography.

• Journal of Korean Society of Disaster and Security
• /
• v.11 no.2
• /
• pp.1-8
• /
• 2018

Extreme climate phenomena are occurring around the world caused by global climate change. The heavy rains exceeds the previous record of highest rainfall. In particular, as flash floods generate heavy rainfall on the mountains over a relatively a short period of time, the likelihood of landslides increases. Gangwon region is especially suffered by landslide damages, because the most of the part is mountainous, steep, and having shallow soil. Therefore, in this study, is to predict the risk of disasters by applying topographic classification techniques and landslide risk prediction techniques to mountain watersheds. Classify the hazardous area by calculating the topographic position index (TPI) as a topographic classification technique. The SINMAP method, one of the earth rock predictors, was used to predict possible areas of a landslide. Using the SINMAP method, we predicted the area where the mountainous disaster can occur. As a result, the topographic classification technique classified more than 63% of the total watershed into open slope and upper slope. In the SINMAP analysis, about 58% of the total watershed was analyzed as a hazard area. Due to recent developments, measures to reduce mountain disasters are urgently needed. Stability measures should be established for hazard zone.

• Journal of the Korean association of regional geographers
• /
• v.11 no.1
• /
• pp.19-28
• /
• 2005

Although Dokdo, small and dependent islands of Ulleung County, can be considered critical in terms of both geo-politics and physical geography, it is clear that Korean geographers have been too silent tn study Dokdo. In the author's view, such tendency is partly due to difficulties in access to Dokdo. In this sense this study would be meaningful for inquiring into the regional geomorphology of Dokdo regardless of only three-day field work. The major findings of the study are as follows. Firstly, the geology of Dokdo is composed of 8 rock units. Secondly, in a slope analysis of Dokdo volcano using GIS tool, steep slopes over $26^{\circ}$ account for 79.1% of whole slopes and even free faces, defined as slopes over $40^{\circ}$, account for 65.4%. Thirdly, the main landforms of Dokdo constitute volcanic landform, coastal landform and the others, such as talus, dyke, tafoni and erosional hollow. Fourthly, it turns out that advanced landform classification map of Dokdo can be designed by taking an approach tn regional geomorphology. Finally, based on a detailed review of the latest geological literature, I argue that part of landforms of East Dokdo(dongdo) is closer tn an erosional hollow than a small crater.

• 한국지형공간정보학회:학술대회논문집
• /
• 2002.11a
• /
• pp.81-92
• /
• 2002

일반적으로 수치사진측량시스템을 통해 도심지역에서 자동으로 DEM을 추출하는 경우 해석도화원도에서 추출하는 DEM에 비하여 정확도가 크게 저하되어 도심지역에 대한 정사투영영상 생성이나 정사투영영상을 이용한 수치지도 제작시 품질저하의 요인이 되고 있다. 따라서 본 연구는 수치사진측량기법을 이용한 도심지역 지형공간정보 생성시 정확도에 영향을 크게 미치는 도심지역 DEM의 정확도를 향상시키는데 목적이 있다. 본 논문의 수행결과, 수치사진측량기법을 이용하여 도심지역에 대한 DEM 추출시 대상지역에 대한 지형분류를 통한 DEM추출방법을 적용하여 도심지역에 대한 DEM의 정확도를 향상시킬 수 있었다.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.8 no.1
• /
• pp.13-22
• /
• 2005

This paper classifies the topography of the Saemangeum Tidal flats based on Landsat TM satellite images by unsupervised ISODATA method, and analysis of the spatiotemporal changes of the classified shapes. The sedimental topography represents various properties according to the Saemangeum Tidal Embankment progress. We well proceed this study of the sedimental changes and distributions. By specifying the topographic characteristics of inner sea areas respectively, the investigation on the case study area according to the changes of the tidal will be useful in the establishment of land reclamation plan and the land use of the reclaimed area. In addition, the estuary image can be divided into tidal flats and sea surfaces using the band 4, also the detailed topography using the band 5, respectively among Landsat TM 7 bands. This paper contributes to the efficient image processing of the spatiotemporal sedimental changes.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.8 no.2
• /
• pp.45-51
• /
• 1990

DEM must have a high accuracy against the actual topographic model. A model which can compute heights responding to random plane position by using of the topographic data and interpolation must be constructed. Interpolation affected by the accuraccy of the observations included noise, which affected by the slop and curvature weight. Data smoothing is a method to reduce the noise. Average declination and area ratio are variable which result similarity in according to slope. But in local area, area ratio well shows a local change. This study try to classify the terrain by the declination to analysis the effects of the declination and curvature weights, and then to represent the most probable model. The result are following : In terrain classification by the slop, p16 and p24 were fitted in the plane surface fit p16 and S in the varying surface, and S and p24 in the irregular surface in classification by curvature, p24 and S were fitted in the plane or varying surface, and p16 in the irregular surface In case of hybrid, p16, p24 and S are fitted in the plane, varying and irregular surface respectively. Smoothing is the most effective in case of slope of 50 persentage and of curvature weight of 0.0015.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2018.05a
• /
• pp.427-427
• /
• 2018

최근 집중호우나 극한 강우사상으로 인하여 산사태나 토석류와 같은 산지재해가 빈번하게 발생하고 있으며 특히 우리나라는 지형 특성상 주거지역이 산지와 인접해 있는 경우가 많아 재해발생 시 피해를 가중시키는 원인이 되고 있다. 산지재해는 예측하기가 어렵고 산지에서 발생한 토석류가 계곡을 따라 흘러 내려와 도심지 및 산지와 인접한 도로나 주택지에 많은 피해를 발생 시키고 있다. 본 연구에서는 해마다 반복적으로 발생하고 있는 산사태나 토석류와 같은 재해의 피해저감과 원인분석을 위하여 강원도 삼척시 도계읍 일대를 대상지역으로 선정하고 산지유역의 위험성 분석을 위하여 사면안정성 예측 모델인 SINMAP 모형을 사용하여 산지재해가 발생 가능한 위험지역 및 안전한 구간을 분석하고 지형분류기법 중의 하나인 Topographic Position Index(TPI) 분석방법을 통해 대상지역의 지형위치지수를 계산하여 위험지형을 분류하였다.

• Journal of Korean Society of Forest Science
• /
• v.98 no.6
• /
• pp.639-645
• /
• 2009

The objective of this research was to introduce the TPI approach for interpreting land-forms of mountain forests in South Korea. We develop an objective procedure to decide the scale factor as a basic analytical unit in land-form classification of rugged mountain areas using TPI. In order to determine the scale factor associated with the pattern of slope profiles, the gradient variance curve was derived from a revised hypsometric curve developed using the relief energy of topographic profiles. Using the gradient variance curve, found was the grid size with which the change in relief energy got the peak point. The grid size at the peak point was determined as the scale factor for the study area. In order to investigate the performance of the procedure based on the gradient variance curve, it was applied to determination of the site-specific scale factors of 3 different terrain conditions; highly-rugged, moderately-rugged and relatively less-rugged. The TPI associated with the corresponding scale factors by study site was, then, determined and used in classifying the land-forms. According to the results of this study, the scale factor gets shorter with more rugged terrain conditions. It was also found that the numbers of valleys and ridges estimated with TPI show almost the same trends as those of the observed and the scale factors tends to approach to the mean distance of ridges.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.25 no.1
• /
• pp.55-62
• /
• 2007

Recent advances in airborne LiDAR technology allow rapid and inexpensive measurements of topography over large areas. The generation of DTM/DEM is essential to numerous applications such as the fields of civil engineering, environment, city planning and flood modeling. The demand for LiDAR data is increasing due to the reduced cost for DTM generation and the increased reliability, precision and completeness. In order to generate DTM, measurements from non-ground features such as building and vegetation have to be classified and removed. In this paper, a segmented morphology filter was developed to detect non-ground LiDAR measurements. First, segments LiDAR point clouds based on the elevation. Secondly classifies those protruding segments into non-ground points. Those non-ground points such as building and vegetation are removed, while ground points are preserved for DTM generation. For experiments, data sets used in Comparison of Filters (ISPRS, 2003) depicting urban and rural areas were selected. The experimental results show that the proposed filter can remove most of the non-ground points effectively with less commission and omission errors.

• Journal of the Korean Geographical Society
• /
• v.23
• /
• pp.1-14
• /
• 1981

이 글에서는 다음의 내용을 다루었다. 1. 지형분류 2. 퇴적물 입도분석 3. 화분분석