• Journal of Korea Water Resources Association
• /
• v.46 no.11
• /
• pp.1079-1088
• /
• 2013

Groundwater pumping from a well has different impacts on streamflow depletion because hydraulic properties of the aquifer and the stream bed differ depending on its location. Therefore, quantitative assessment of streamflow depletion due to each groundwater pumping with different well locations is needed for the effective groundwater development and streamflow management. In this study, a watershed-based surface water and groundwater integrated model, SWAT-MODFLOW was used to assess the streamflow depletion near stream reach due to groundwater pumping from a well located within the Sinduncheon watershed. The arbitrary 50 wells among the currently used groundwater pumping wells were selected within the study area and the streamflow responses to each groundwater pumping were simulated at nearby and downstream reaches. In particular, the applicability of the Stream Depletion Factor (SDF) and Stream Bed Factor (SBF), which are widely used for evaluating the degree of streamflow depletion due to groundwater pumping, was evaluated. The simulated results demonstrated that the streamflow depletion rate divided by the pumping rate significantly differ depending on well locations and distance between well and stream, showing a wide range of values from below 20% to above 90%. From the simulated results, it was found out that the SDF or the SBF can be a partial referred value but not an absolute criterion in determining whether a pumping well has a great impact on streamflow depletion or not.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.1
• /
• pp.275-284
• /
• 2021

Survival analysis was used to analyze whether there is a difference in the effect of leverage on corporate failure according to the firm size. A total of 25,250 (year-company) companies listed on the Korea Stock Exchange and KOSDAQ market from 1999 to 2019 were analyzed. First, the increase in leverage generally acts as a factor that increases the possibility of corporate failure. On the other hand, the increase in the trade payable ratio lowered the possibility of failure of the company. The increase in corporate trade payable was perceived as a factor in reducing the possibility of corporate failure because it was considered the active development of business activities or active use of interest-free debt rather than leading to an increase in corporate risk. Second, a higher leverage ratio and trade payable ratio in large firms lowered the possibility of corporate failure. In the SMEs, all types of leverage increases are a factor that increases corporate failure. Overall, the effect of leverage on corporate failure differs according to the size of the company.

• Economic and Environmental Geology
• /
• v.52 no.6
• /
• pp.519-528
• /
• 2019

In 2017, Korea Institute of Geoscience and Mineral Resources (KIGAM) has excavated a trench at Yongjang-li in the city of Gyeongju to examine the evidence of fault movement related with the 2016 earthquake in unconsolidated sediments. In the trench profile, the author has observed the features of ongoing soil-forming processes and groundwater movement overlapped on the sedimentary layers. The soil formation was in its initial stage, and most of the original sedimentary layers could be observed. The color changes depending on the redox conditions and by the Mn/Fe oxide precipitation, however, were the most significant features obscuring sedimentary records. The dark Mn oxide precipitates formed at the groundwater levels often concealed the sedimentary unit boundaries. The groundwater levels varied depending on the particle sizes of the sedimentary layers contacting the groundwater, and the Mn oxide precipitates have formed at varying depths. The groundwater could move upward along the narrow pores in the fine-textured sedimentary layer more than a few meters showing the gray color indicating a reducing condition for iron.

• Journal of Korean Port Research
• /
• v.11 no.1
• /
• pp.1-11
• /
• 1997

The conventional methods of container forecasting is done through regression methods based on GNP growth trends and by other forecasting methods proposed by several authors. However these efforts prove to be inadequate with visible weakness and a more reasonable approach need to be determined. The succeeding sections elaborate the methodology and approach adopted. The results are then compared through a case study involving the forecast figures derived by the Pusan Port Authority and the values obtained by MRCS model introduced in this paper.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2001.09a
• /
• pp.172-175
• /
• 2001

이 연구에서는 5개의 시추공에 대한 양수시험을 실시하여 대수층의 수리학적 이방성과 지하수의 주 유동방향을 규명하고자 하였다. 코아검층 및 초음파주사검층을 통해 각각의 공에 대한 균열방향을 결정하고 이를 토대로 통합해본 결과 크게 세 방향의 균열군이 집중성을 보였다. 가장 빈도가 높은 균열의 방향은 N0$^{\circ}$~40$^{\circ}$E/30$^{\circ}$~50$^{\circ}$SE 그리고 N30$^{\circ}$~ 80 $^{\circ}$W/20$^{\circ}$~50$^{\circ}$ NE이 방향이 함께 나타났으며 두 번째 균열의 방향은 N0$^{\circ}$ ~50$^{\circ}$E/60$^{\circ}$ ~80$^{\circ}$NW로 나타났다. 세 번째 방향은 N30$^{\circ}$~50 $^{\circ}$W/70$^{\circ}$~80$^{\circ}$SW방향의 균열로 구성된다. 이처럼 지표하에서는 크게 세 방향의 균열이 다른 방향을 보이는 균열에 비해 상대적으로 큰 빈도를 가지며 발달하고 있음을 알 수 있다. 대수층이 이방성이고 균질하다는 가정하에 양수시험을 실시하여 각각의 공에 대한 최대 투수량계수 ( $T_{{\varepsilon}{\varepsilon}}$)와 최소 투수량계수 ( $T_{ηη}$)값을 산출하고 주 텐서방향 ($\theta$)을 결정하였다. 그 결과 BH-1, BH-4, BH=5공을 제외한 BH-2, BH-3호공에서의 이방성 투수량계수텐서값은 이 논문의 가정인 대수층이 이방성이고 균질하다는 가정에 일치하지 않았다. 따라서 원형좌표계에 도시하였을 때 다른 공에 비해서 비균질성이 심한 결과로 인해 이방성타원체 에서 많이 벗어남을 보였다. 이로인해 3개의 공 BH-1, BH-4, BH-5호공을 사용하여 대수층의 이방성을 분석하여 보았다. BH-1호공에서의 $T_{{\varepsilon}{\varepsilon}}$는 171.90 $m^2$/day, $T_{ηη}$는 71.0l $m^2$/day이고 주 텐서방향은 Nl5.39$^{\circ}$ E로 나타났다. BH-4호공의 $T_{{\varepsilon}{\varepsilon}}$는 268.20 $m^2$/day, $T_{ηη}$는 28.75 $m^2$/day이고 주 텐서방향은 N7.55$^{\circ}$E이며 BH-5호공에서의 $T_{{\varepsilon}{\varepsilon}}$는 168.40 $m^2$/day, $T_{ηη}$는 66.80 $m^2$/day이고 주 텐서방향은 N76.59$^{\circ}$E로 나타났다. 이처럼 연구지역에서의 각각의 공에 대한 투수량계수텐서는 서로 다르게 나타났으며 이에 따른 주 텐서방향도 서로 다름을 알 수 있다.

• Journal of the Korean Society of Groundwater Environment
• /
• v.5 no.2
• /
• pp.88-100
• /
• 1998

Since fractures may serve as major conduits of groundwater flow in crystalline rocks, characterization of conductive fractures is especially important for interpretation of flow system. In this study, characterization of fractures to investigate hydraulically conductive fractures in gneisses at an abandoned mine area was performed. The orientation, width, length, movement sense, infilling materials, spacing, aperture, roughness of both joints and faults and intersection and connectivity to other joints were measured on outcrops. In addition, characteristics of subsurface fractures were examined by core logging in five boreholes, of which the orientations were acquired by acoustic televiewer logging from three boreholes. The dominant fracture sets were grouped from outcrops; GSet 1: N50-82$^{\circ}$E/55-90$^{\circ}$SE, GSet 2: N2-8$^{\circ}$E/56-86$^{\circ}$SE, GSet 3: N46-72$^{\circ}$W/60-85$^{\circ}$NE, GSet 4:Nl2-38$^{\circ}$W/15-40$^{\circ}$SW and from subsurface; HSet 1: N50-90$^{\circ}$E/55-90$^{\circ}$SE, HSet 2: N10-30$^{\circ}$E/50-70$^{\circ}$SE, HSet 3: N20-60$^{\circ}$W/50-80$^{\circ}$NE, HSet 4: N10-50$^{\circ}$E/$\leq$40$^{\circ}$NW. Among them, GSet 1, GSet 3 and HSet 1, HSet 3 are the most intensely developed fracture sets in the study area. The mean fracture spacings of HSet 1 are 30-47cm and code 1 fractures, such as faults and open fractures, comprise 21.0-42.9 percent of the whole fractures in each borehole. HSet 3 shows the mean fracture spacings of 55-57cm and the ratio of code 1 fractures is 15.4-26.9 percent. In spite of the mean fracture spacing of 239cm, code 1 fractures of HSet 4 have the highest ratio of 54.5 percent. From the fact that faults or open fractures have high hydraulic conductivity, it can be inferred that the three fracture sets of N55-85$^{\circ}$E/50-80$^{\circ}$SE, N20-60$^{\circ}$W/50-75$^{\circ}$NE and N10-30$^{\circ}$E/$\leq$30$^{\circ}$NW from a fracture system of relatively high conductivity. It is indirectly verified with geophysical loggings and constant injection tests performed in the boreholes.

• Journal of the Korea Society of Computer and Information
• /
• v.17 no.5
• /
• pp.157-167
• /
• 2012

The purpose of this paper is to develop an OLAP (online analytical processing) database system that supports the SMBA (Small and medium Business Administration) policy funding. A heterogeneous dimension schema will be central in staged support of policy funds. In this paper, therefore, we designed the FREQUENCY dimension table which has a heterogeneous dimension schema structure. In this paper, we made a model of measuring SME (small and medium-sized enterprise) size first. The model is composed of six determinants of firm growth such as sales, employment, own technology, the operating profit to sales ratio, the debt ratio, and the current ratio. We developed the OLAP database system by using three dimensions including the FREQUENCY dimension, and using the model of measuring SME size. Also we assessed past decisions on policy funding in the Small Business Policy Funds Support Project (2004-2007) by using the OLAP database system.

• The Journal of the Acoustical Society of Korea
• /
• v.40 no.4
• /
• pp.278-289
• /
• 2021

In this study, the acoustic performance of a dissipative silencer used in the ship with excellent performance compared to its size was predicted and analyzed using a numerical analysis method to reduce the pipe noise. To this end, the performance of the single expansion chamber-shaped silencer was verified using experimental and numerical analysis methods. The acoustic performance of the silencer was expressed using the Transmission Loss (TL), an indicator of its own performance, and the result was derived using the two-load method, which measured by changing the impedance at the end of the pipe. For the numerical analysis method, a general-purpose finite element analysis program was used, and the Delany-Bazley-Miki model with the flow resistivity of the sound absorbing material as an input parameter was applied. Finally, we compared the experimental and simulated results for each of the acoustic performances of the single expansion type and the dissipative silencer to confirm the consistency of the results, and predicted and analyzed the simulation results for four cases according to the properties of the sound absorbing material.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.6 no.4
• /
• pp.245-255
• /
• 2008

Korea Hydro and Nuclear Power Company(KHNP) conducted site investigations for a low and intermediate-level nuclear waste repository in the Gyeong Ju site. The site characterization work constitutes a description of the site, its regional setting and the current state of the geosphere and biosphere. The main objectives of hydogeological investigation aimed to understand the hydrogeological setting and conditions of the site, and to provide the input parameters for safety evaluation. The hydogeological characterization of the site was performed from the results of surface based investigations, i.e geological mapping and analysis, drilling works and hydraulic testing, and geophysical survey and interpretation. The hydro-structural model based on the hydrogeological characterization consists of one-Hydraulic Soil Domain, three-Hydraulic Rock Domains and five-Hydraulic Conductor Domains. The hydrogeological framework and the hydraulic values provided for each hydraulic unit over a relevant scale were used as the baseline for the conceptualization and interpretation of flow modeling. The current hydrogeological characteristics based on the surface based investigation include some uncertainties resulted from the basic assumption of investigation methods and field data. Therefore, the reassessment of hydrostructure model and hydraulic properties based on the field data obtained during the construction is necessitated for a final hydrogeological characterization.

• Journal of the Korean Regional Science Association
• /
• v.37 no.2
• /
• pp.3-16
• /
• 2021

This study analyzed various indicators of new stores targeting urban regeneration areas and compared them with the control group to evaluate the possibility of revitalization of areas where urban regeneration projects are taking place. The results of the study are divided into three categories. First, the density of new start-ups in urban regeneration areas was higher than that of the control group. Through this, urban regeneration areas will bring about an influx of new floating populations and will act as a positive factor in local revitalization. Second, the urban regeneration areas and the control group were compared based on the business type of new start-up stores. As a result of the analysis, urban regeneration areas have a high proportion of industries targeting the active population, not residents. This will promote local activation by attracting the daytime population. Third, the urban regeneration areas and the control group were compared based on the diversity of the business types of newly established stores. As a result of the analysis, urban regeneration areas in metropolitan cities will induce multipurpose shopping for consumers as stores selling different products are concentrated. On the other hand, urban regeneration areas in small cities will induce consumers to compare shopping as stores selling similar products are concentrated.