• Journal of Wetlands Research
• /
• v.21 no.1
• /
• pp.34-42
• /
• 2019

Baseflow which is one of the unmeasurable components of streamflow and slowly flows through underground is important for water resource management. Despite various separation methods from researches preceded, it is difficult to find a significant separation method for baseflow separation. This study applied the MRC method and developed the improved approach to separate baseflow from total streamflow hydrograph. Previous researchers utilized the whole streamflow data of study period at once to derive synthetic MRCs causing unreliable results. This study has been proceeded with total nine areas with gauging stations. Each three areas are selected from 3 domestic major watersheds. Tool for drawing MRC had been used to draw MRCs of each area. First, synthetic MRC for whole period and two other MRCs were drawn following two different criteria. Two criteria were set by different conditions, one is flow condition and the other is seasonality. The whole streamflow was classified according to seasonality and flow conditions, and MRCs had been drawn with a specialized program. The MRCs for flow conditions had low R2 and similar trend to recession segments. On the other hand, the seasonal MRCs were eligible for the baseflow separation that properly reflects the seasonal variability of baseflow. Comparing two methods of assuming MRC for baseflow separation, seasonal MRC was more effective for relieving overestimating tendency of synthetic MRC. Flow condition MRCs had a large distribution of the flow and this means accurate MRC could not be found. Baseflow separation using seasonal MRC is showing more reliability than the other one, however if certain technique added up to the flow condition MRC method to stabilize distribution of the streamflow, the flow conditions method could secure reliability as much as seasonal MRC method.

• Korean Journal of Heritage: History & Science
• /
• v.43 no.3
• /
• pp.144-179
• /
• 2010

Investigation into iron manufacture relics has been active since 1970s, especially accelerated in 1990s across the country. Consideration of the importance of production site relics has lately attracted attention to iron manufacture relics. Methodological studies of the investigation into iron manufacture relics, however, were less made compared with those of the investigation into tomb, dwelling, or swampy place relics. It is because the process of iron manufacture is too complicated to understand and also requires professional knowledge of metal engineering. With the recognition of these problems this research is to form an opinion about how to excavate, to rearrange and classify, and to examine iron manufacture relics, based upon the understanding of the nature of iron, iron production process, and metal engineering features of related relics like slag, iron lumps and so on. This research classifies iron manufacture relics into seven types according to the production process; mining, smelting, refining, tempering, melting, steelmaking, and the others. Then it arranges methods to survey in each stage of field study, trial digging, and excavation. It also explains how to classify and examine excavated relics, what field of natural science to be used to know the features of relics, and what efforts have been made to reconstruct a furnace and what their problems were, making the best use of examples, drawings, and photos. It comes to the conclusion, in spite of the lack of in-depth discussion on application and development of various investigation methods, that iron manufacture relics can be classified according to the production process, that natural sciences should be applied to get comprehensive understanding of relics as well as archeological knowledge, and that efforts to reconstruct a furnace should be continued from the aspect of experimental archeology.

• Korean Journal of Heritage: History & Science
• /
• v.45 no.4
• /
• pp.4-21
• /
• 2012

Jade ornaments, which include slit earrings, scoop-shaped objects and tubular beads have been extensively identified in Northeast Asia, such as Korea, China, Japan and the Maritime Province of Siberia. Among them slit earrings are distributed in the whole area of Northeast Asia. Although this object shows the typological differences in accordance with the excavated region in detail, all of them are characterised by the slit on the centre of jade ring. The buried context and the shape of this object suggest that this artefact was the earring; thus it is named to 'slit earring'. Most of slit earrings of the Neolithic Age concentrate in Northeast China and the areas south of the Yangtze River, and the Japanese Archipelago. However, unfortunately, Slit earrings, which were produced in the tradition of the incipient and early phases of the Neolithic Age in Northeast Asia, have not been excavated in the Korean Peninsula. The number of slit earrings reported so far is eight, and especially until the 20th century, almost none was reported with its exact excavation location and only three of them are known as excavated through surface surveys and preliminary excavations. However, from the beginning of the 21st century onwards, the number of discovered slit earrings is increasing. Particularly, five pieces of this object uncovered in the 21st century are discovered in the official excavation; thus the exact archaeological context such as buried locations and chronologies could be estimated. By considering the buried context, slit earrings are associated with stone axes, which were produced in the incipient and early phase of the Neolithic Age in the Korean Peninsula. In addition, considering the number of unearthed objects is a few, it could be postulate that slit earring was the artefact that only a few persons, who had a special role in the society, could possess. However, slit jade earrings that have been excavated in the Korean Peninsula are extremely low in their number compared to the cases of its neighbouring countries such as China and Japan, and the researches on this subject have not been much conducted in Korea. Therefore, it is my supposition that slit earrings, which have been discovered in the Korean Peninsula, might be the imported item from the nearby areas. Particularly, the Southern Coast was closely connected with Japanese Islands and the Eastern Coast was interchanged with Northeast China or the Maritime Province of Siberia. Considering that excavations and researches on the Neolithic remains in the Korean Peninsula have not been sufficiently and actively conducted, it could be expected that the further investigations and researches will reveal the sufficient quantities of slit earrings in near future.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.47 no.5
• /
• pp.78-90
• /
• 2019

The purpose of this study is to explore the direction of developing policies for parks and green spaces for inclusive urban planning and regeneration. By reviewing the status, budget, and laws pertaining to urban parks in Korea, as well as assessing the inclusivity of urban parks, this study revealed the problems and limitations in Korea as follows. First, the urban park system, which takes into account indicators such as park area per capita and green space ratio, is focused only on quantitative expansion. Second, the distribution of urban parks is unequal; hence, the higher the number of vulnerable residents, the lower the quality of urban parks and green spaces. Moreover, this study focused on the UK central government, along with the five local governments, including London, Edinburgh, Cardiff, Belfast, and Liverpool. Through an analysis of the contexts and contents establishing UK park and green space policies that can reduce socioeconomic inequalities while at the same time increase inclusiveness. This study discovered the following. The government's awareness of the necessity of tackling socioeconomic inequalities to make an inclusive society, the change in the urban regeneration policies from physical redevelopment to neighborhood renewal, and the survey and research on the correlation of parks and green spaces, inequality, health, and well-being provided the background for policy establishment. As a result, the creation of an inclusive society has been reflected in the stated goals of the UK's national plan and the strategies for park and green space supply and qualitative improvement. Deprived areas and vulnerable groups have been included in many local governments' park and green space policies. Also, tools for analyzing deficiencies in parks and methods for examining the qualitative evaluation of parks were developed. Besides, for the sustainability of each project, various funding programs have been set up, such as raising funds and fund-matching schemes. Different ways of supporting partnerships have been arranged, such as the establishment of collaborative bodies for government organizations, allowing for the participation of private organizations. The study results suggested five policy schemes, including conducting research on inequality and inclusiveness for parks and green spaces, developing strategies for improving the quality of park services, identifying tools for analyzing policy areas, developing park project models for urban regeneration, and building partnerships and establishing support systems.

• Korean Journal of Remote Sensing
• /
• v.35 no.3
• /
• pp.347-358
• /
• 2019

Lambertian cloud model (Lambertian Cloud Model) is the simplified cloud model which is used to effectively retrieve the vertical ozone distribution of the atmosphere where the clouds exist. By using the Lambertian cloud model, the optical characteristics of clouds required for radiative transfer simulation are parametrized by Optical Centroid Cloud Pressure (OCCP) and Effective Cloud Fraction (ECF), and the accuracy of each parameter greatly affects the radiation simulation accuracy. However, it is very difficult to generalize the vertical ozone error due to the OCCP error because it varies depending on the radiation environment and algorithm setting. In addition, it is also difficult to analyze the effect of OCCP error because it is mixed with other errors that occur in the vertical ozone calculation process. This study analyzed the ozone retrieval error due to OCCP error using two methods. First, we simulated the impact of OCCP error on ozone retrieval based on Optimal Estimation. Using LIDORT radiation model, the radiation error due to the OCCP error is calculated. In order to convert the radiation error to the ozone calculation error, the radiation error is assigned to the conversion equation of the optimal estimation method. The results show that when the OCCP error occurs by 100 hPa, the total ozone is overestimated by 2.7%. Second, a case analysis is carried out to find the ozone retrieval error due to OCCP error. For the case analysis, the ozone retrieval error is simulated assuming OCCP error and compared with the ozone error in the case of PROFOZ 2005-2006, an OMI ozone profile product. In order to define the ozone error in the case, we assumed an ideal assumption. Considering albedo, and the horizontal change of ozone for satisfying the assumption, the 49 cases are selected. As a result, 27 out of 49 cases(about 55%)showed a correlation of 0.5 or more. This result show that the error of OCCP has a significant influence on the accuracy of ozone profile calculation.

• Journal of Life Science
• /
• v.29 no.1
• /
• pp.112-117
• /
• 2019

Herbal medicines are widely used as therapeutic products in many countries. Corni fructus (CF), the dried ripe sarcocarp of Cornus officinalis Sieb. et Zucc (Cornaceae), has been used for thousands of years in traditional medicine and has been reported to be effective for the prevention and treatment of various diseases, such as kidney diseases and diabetes. Recent research on CF has documented a wide spectrum of therapeutic properties, which include anti-inflammatory, ant-oxidative, immunomodulatory, and anti-cancer effects. However, there is no information on its safety. Therefore, in this study, the toxicity of water extract of CF to ICR mice was investigated. The mice received a single dose of water extract of CF (1,000, 2,000, and 5,000 mg/kg of body weight) via the oral route. Mortality, clinical signs, body weight changes, gross findings, and weights of the principal organs after 14 d were then assessed. The results revealed no adverse effects of CF as determined by clinical signs, body weights, or organ weights and no gross pathological findings in any of the treatment groups. These results suggest that the 50% lethal dose and approximated lethal dose of CF extract is over 5,000 mg/kg. The findings provide scientific evidence for the safety of CFs.

• Journal of the Geological Society of Korea
• /
• v.54 no.5
• /
• pp.529-544
• /
• 2018

Dongrae hot spring belongs to the residual magma type and has a long history of bathing since the Silla dynasty in Korea. Due to long development of hot spring water, it is expected that the amount of hot spring water in Dongrae hot spring has been changed. In this study, long-trem water level data of Dongrae hot spring were examined for recognizing the change of the hot spring. By the fluctuation analysis of the hot spring water level from January 1992 to July 2018, the maximum and minimum annual drawdowns of no. 27 well were 137.70 and 71.60 meters, respectively, with an average drawdown of 103.39 m. On the other hand, the maximum and minimum annual drawdowns of no. 29 well were 137.80 and 71.70 meters, with an average drawdown of 103.49 m. Besides, drawdown rate became bigger in recent years. As a result of analyzing autocorrelation of the two wells, the correlation coefficient ranged from 0.919 to 0.991, showing seasonal groundwater level fluctuation. The cross correlation analysis between water level and precipitation as well as water level and hot spring discharge resulted in the correlation coefficients of -0.280 ~ 0.256 and 0.428 ~ 0.553, respectively. Therefore, using Dongnae hot-spring water level data from 1992 to 2018, the Mann-Kendall test and Sen's test showed that the continuous decline of water level was mainly caused by the pumping of the hot spring water among various reasons.

• Journal of Life Science
• /
• v.31 no.3
• /
• pp.287-297
• /
• 2021

Cornus officinalis Siebold & Zucc. is traditionally used as an edible and medicinal plant in many countries in East Asia. Previous studies have shown the pharmacological potential of extracts and components of C. officinalis, but comparative analysis of the composition of the leaf, stem, and fruit extracts has been insufficient to date. In the present study, the content of active antioxidant and anti-inflammatory ingredients was verified in different C. officinalis parts (under-ripe sansuyu, ripe sansuyu, seed, leaf, stem, and dried sansuyu). One active component, morroniside, was high in fruit (under-ripe and ripe sansuyu), while loganin was high in fruit (under-ripe sansuyu) and cornin was high in seeds. Total polyphenol contents were highest in fruit (ripe sansuyu) and flavonoids were highest in leaves. DPPH radical scavenging activity was highest in leaves, followed by seeds and then ripe sansuyu extract. The anti-inflammatory efficacy of leaf extracts of C. officinalis (LCO) was further investigated by measuring their effects on levels of nitric oxide (NO) and the pro-inflammatory cytokines interleukin (IL)-1β and IL-6 in RAW 264.7 macrophages. Non-cytotoxic concentrations of LCO effectively decreased the lipopolysaccharide (LPS)-induced expression of inducible NO synthase, resulting in decreased NO production. LCO also significantly suppressed LPS-induced production and expression of IL-1β and IL-6. Taken together, the present findings suggest that C. officinalis leaves have potential as natural materials for the development of antioxidant and anti-inflammatory agents.

• Journal of Korean Society of Forest Science
• /
• v.100 no.1
• /
• pp.112-117
• /
• 2011

This study was conducted for searching the functional feeding groups, and community stability of the macroinvertebrate on forest fire area of Uljin-gun. The samples were collected from 2 sites of control area and 2 sites of experimental area during 2007 to 2009. The identified species were 89 belonged to 47 families, 16 order, 6 class, and 4 phylum in control area. And 84 belonged to 43 families, 16 order, 6 class, and 4 phylum were identified in experimental area. As a result of changes in species and individuals of E.P.T. taxa investigated in experimental area by year, Ephemeroptera was 21 species, $2,434.6inds./m^2$, Plecoptera was 3 species, $199.8inds./m^2$, and Trichoptera 14 species, $540.2inds./m^2$ in 2007. And in 2009, Ephemeroptera was 9 species, $296inds./m^2$, Trichoptera was 4 species, $44.4inds./m^2$, and Plecoptera was none, showing that species and individuals belonging to E.P.T. taxa decrease rapidly every year. Community analysis by year, in 2008 when the water system started to be influenced by the fire directly, it showed a trend that H' and RI decreased in the experimental area. Functional feeding group by year, it showed a trend that species and individuals of GC type which is a functional group picking up and eating FPOM (fine particulate organic matter) from deposits in the bottom of water or benthic areas and performs an important function of material circulation in ecosystem decrease every year. Community stability by year, an environment of water system in forest fire area started to be somewhat destroyed, from 2008, it is shown that both species in I area which have great ability of resistance and recovery and species in III area which live in relatively stable water system decreased a little.

• Knowledge Management Research
• /
• v.22 no.4
• /
• pp.103-118
• /
• 2021

Gross Domestic Product(GDP) is affected by the economic power of each industry. Therefore, using statistical data related to the food and drug industry, we tried to determine the proportion of GDP and analyzed the impact of the food, medical & drug industry on the domestic economy through comparison with other industries. The food, medical & drug industry has a wide range of industries among domestic industries and is closely related to the lives of the people. In addition, human lifespan is increasing, and recently, due to the spread of an infectious disease called COVID-19, the bio sector belonging to the food, medical & drug industry is in the spotlight. Attention is needed to the industry as the competitiveness of the food, medical & drug industry is expected to increase. The Ministry of Food and Drug Safety provides statistics on the food, medical & drug industry, but does not provide a systematic share of GDP. Since it is difficult to determine how influential the industry is compared to other industries, this study attempts to obtain the share of GDP in the food, medical & drug industry and compare it with other industries. In the process of obtaining GDP in the food, medical & drug industry sector, there was a difficulty in that the figures in statistical data were not unified by time point. In order to overcome the limitations, statistical data as a standard are determined. The GDP of the Food, Medical & Drug Industry was estimated using total added value, production, sales, and added value by industry. Compared to other industries, the Food, Medical & Drug Industry's GDP ranked second after the GDP of the manufacturing industry. As a result, it suggests that the food, medical & drug industry has a great influence on the national economic power among domestic industries.