• The Journal of Engineering Geology
• /
• v.33 no.3
• /
• pp.475-487
• /
• 2023

We surveyed the distribution of soil layers on Dongdo and Seodo of Dokdo and measured the physical properties of the soils. To investigate the distribution of soil layers, the soil depth was measured directly in accessible locations, and visual observations of inaccessible locations were carried out using drones and boats. Soil depths ranged from 3 to 50 cm, and most soil layers had depths of 10~20 cm. Based on these results, a map of the soil layer was drawn using 5 cm intervals for soil depth. To analyze the soil characteristics of Dokdo, soil samples were collected from 13 locations on Dongdo and 13 locations on Seodo, in consideration of various geological settings. According to the results of grain size distribution tests, sand contents were >75%, and soil from Seodo contained more gravel-sized particles than that from Dongdo. Using the unified soil classification system (USCS) and textural classification chart of the United States Department of Agriculture (USDA), most of the soil samples from Dokdo are classified as sand, and some are classified as loamy or clayey sand. In addition, well-graded loamy or clayey sands are more common in Dongdo, and poorly graded sands with gravel are more common in Seodo. These results are expected to be important for studying soil characteristics on Dokdo.

• The Journal of Engineering Geology
• /
• v.19 no.1
• /
• pp.1-8
• /
• 2009

Geophysical surveys were conducted on an upper part of a natural slope located at Daejeon University. Electrical resistivity and seismic refraction measurements were carried out to obtain information on a weathered zone and internal structure at shallow depth, while AMT measurement a bed rock and geological structure at deep depth. With all the techniques applied, these results show a good correlation between electrical resistivity images and refraction velocity distributions for the characterization of a weathering and geological structure at depth. In particular, AMT survey seems to be the powerful tool for detecting a distribution of a bed rock with deep depth. The combined geophysical investigation produced a detailed image of a subsurface structure and improved well in the interpretation.

• Tunnel and Underground Space
• /
• v.32 no.6
• /
• pp.530-548
• /
• 2022

The site selection process for deep geological disposal of high-level radioactive waste will be conducted in stages, and 103 evaluation parameters related to site selection have been proposed. In the field of rock mechanics and rock engineering, there are 33 evaluation parameters for intact rock, joint and rock mass, and they are applied in the basic and detailed investigation stages. In this report, uniaxial compressive strength, in-situ stress, joint distribution, and rock mass classification were selected as the main evaluation parameters, and among them, uniaxial compressive strength and in situ stress were selected as key evaluation parameters. Statistical techniques or regression analysis were performed for granite in Wonju and Chuncheon to evaluate the distribution range for the selected key evaluation parameters. The average of the uniaxial compressive strength in the Wonju area estimated through the posterior distribution is about 171 MPa, and about 123 MPa in the Chuncheon area. The maximum in situ stress acting in the Wonju area was less than 30 MPa and less than 40 MPa in the Chuncheon area. The direction of the maximum horizontal stress calculated by regression analysis was 101° in Wonju, and in the case of Chuncheon, it was 95°, respectiviely.

• The Journal of Engineering Geology
• /
• v.3 no.2
• /
• pp.101-114
• /
• 1993

GIS technique was applied to identify the regional hydrologic units for groundwater exploitation and recharge analysis in a study area. The technique was very effective to identify the potential areas for groundwater exploitation, and for groundwater management & land use planning. GIS database of environmental resources was complied from a variety of sources and scales as the foundation for analysis, including digitizing and scanning of hardcopy maps. A DEM(Digital Elevation Model) was used to dassify slopes, and identify problematic drainage system. Quantitative analysis of environmental resources helps us to develop the scoring system of GIS model, which evaluates each resource in relation to the others and reflects the relative importance of each resource. ARC4NFO was used to construct digital database, and the cartographic simulation techniques were applied in order to create new maps.

• The Journal of Engineering Geology
• /
• v.13 no.2
• /
• pp.157-170
• /
• 2003

This study is performed to investigate the cause of slope failure and to suggest suitable stabilization methods for the failed rock slopes. The slope which is located along the national highway between Maesan and Kakok in Dangjin-gun failed during the construction of roads. Site investigation, drilling program, field measurements, rainfall records, and stability analyses are used to investigate the cause of the slope failure. The problem determining the cut-slope angle based on the existing design manual for the construction of roads is reviewed based on the case history given in this paper. If weakness layer and geological structures such as folds and faults are developed in a slope, slope failure is possible even though the direction of slope and the direction of discontinuities depart more than $30^{\circ}$.

• The Journal of Engineering Geology
• /
• v.22 no.3
• /
• pp.353-363
• /
• 2012

The geology of Ulleung-Do is dominated by volcanic rocks with low strength and trachytic rocks with high strength but containing vertical joints that yield easily. Consequently, rockfalls along roadcuts are a major geological hazard, with the potential to affect the ring road of Ulleung-Do. In this study, we performed three types of rockfall hazard-risk assessment on the 3-km-long section of the ring road expected to have the highest possibility of rockfall. We used a rockfall ranking sheet in a roadside landslide hazard map, the Slope Stability Inspection Manual for National Highways (Japan), and a rockfall hazard rating system for inspection from the Japan Highway Public Corporation. We also employed the evaluation criteria of 'RHRS' developed by the Federal Highway Administration (FHA). An analysis of roadcuts at 27 sites with regard to geographic and geological conditions resulted in the identification of three classes of rockfall hazard (high, medium, and low). Of note, over 74% of slopes were assessed as high- and medium-class. Finally, a rockfall hazard map of the northeast region of Ulleung-Do was produced based on the evaluation results.

• The Journal of Engineering Geology
• /
• v.17 no.4
• /
• pp.555-566
• /
• 2007

In general, RMR classification system is used for the support design of a tunnel. Face mapping during excavation and RMR-based rock classifications are conducted in order to provide information for complementary changes to preliminary survey plans and for continuous geological estimations in direction of tunnel route. Although they are ever so important, there are not enough time for survey in general and sometimes even face mapping is not available. Linear regression analysis for the estimation of mediating RQD and condition of discontinuities, which require longer time and more detailed observation in RMR, was performed and optimum regression equations are suggest as the result. The geological data collected from tunnels were analyzed in accordance with three rock types as sedimentary rock, phyllite and granite to see geological effects, generally not been considered in previous researches. Parameters for the regression analysis were set another RMR factor.

• Tunnel and Underground Space
• /
• v.21 no.4
• /
• pp.251-263
• /
• 2011

The geomechanical characteristics of rock and the structural geological feature of the fault should be studied and examined for the successful construction of large-span tunnel. In this case study, that is a important case for the tunnel collapse and reinforcement during the construction for the waterway tunnel at large thrust fault zone in schist, we carried out geological and geotechnical survey for make the cause and mechanism of tunnel collapse. Also, we have designed the reinforcement and re-excavation for the safe construction for collapse zone and have carried out successfully the re-excavation and finished the final concrete lining.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2022.05a
• /
• pp.280-280
• /
• 2022

급경사지의 붕괴원인은 강수량과 지형적, 지질적 원인 등이 있지만 최근 집중호우 및 홍수사상에서 많은 피해가 발생한 것에서 강수량과 급경사지 붕괴는 밀접한 상관관계를 가지고 있다. 급경사지 붕괴에 대한 많은 선행연구가 진행되었지만 특히, 강우량과의 상관성을 해석하고 기준을 지질과 지형적 특성에 대한 규명을 하고자 노력하였다. 2015년 행정안전부에서는 급경사지 지역의 주민피해를 최소화하기 위하여 주민대피 관리기준을 제시하였다. 주민대피 관리기준에는 계측기준과 강우량 기준으로 나누어 급경사지 하류지역의 주민대피를 위험단계별로 제시하였다. 그러나 최근의 강우가 급격하게 변화하고 급경사지 지역의 많은 피해가 발생하면서 주민대피 관리기준 중 강우기준의 조정에 대한 필요성이 제기되었다. 본 연구에서는 1999년부터 2020년 까지 발생한 급경사지 피해사례를 조사하여 산사태 피해지역의 강우량 자료를 수집하여 지속시간별 강우량과 1,2,3 시간에 대한 연속강우자료를 수집하여 위험단계별 주민대피 강우량을 제시하였다. 기존 2015년도 주민대피 강우기준을 산정시 분석에 적용된 지질별 강우를 고려하여 재산정하여 위험단계별 주민대피 강우기준을 산정하였다.

• The Journal of Engineering Geology
• /
• v.10 no.3
• /
• pp.205-216
• /
• 2000

An unstable natural slope located at Icheon-Ri, Dasa-Eup, Dalseong-Kun which has been severely cracked during heavy rain fall in September, 1998, was investigated and analysed for remedial measures. Various geological data were obtained by performing a surface geological survey, a ground penetrating radar(GPR) exploration, four geotechnical borings with field and laboratory tests, and the precipitation records were also reviewed. Based on the these data, the probable sliding plane was determined as a bedding plane with dip angle of 20 to 25 degrees between sandstone and shale layers at depth of 6 to 8 meters. By performing back analyses with the limit equilibrium method, the friction angle and cohesion of the sliding plane were determined as 18$^{\circ}$ and 0, respectively. Based on these results, a series of stability analyses such as stereo-graphic projection method, limiting equilibrium method and numerical method were carried out. The remedial measures for the unstable slope were selected based on the results of the limit equilibrium analyses by considering various conditions expected at the site. Ground grouting or anchoring method with proper surface drainage systems could be employed for the long term safety of the slope.