• International Journal of Highway Engineering
• /
• v.12 no.4
• /
• pp.101-110
• /
• 2010

In this paper, it has been studied about the CRCO to maintain or rehabilitate the aged JCP. The CRCO and JCO was constructed at useless section of Seo-Hae-Ahn express highway in South Korea. The performance evaluation was conducted. Especially, it was focused on the roll of longitudinal reinforced steels inserted into the CRCO. On crack survey results from field construction section, the reflection cracks at joint of the existing pavement occurred in CRCO. However, due to the constraints of longitudinal reinforced steels, crack width was small. Total crack length and quantity in the CRCO more than that in the JCO. And crack spacing in the CRCO was narrower than it in the CRCP. Through the bonding strength test results, if the cold milling and cleaning as well as surface treatment is applied, there will be no debonding problem at interlayer in the early age. From analysis of the horizontal behavior at the joint, the longitudinal reinforced steels constrained crack width which became wider than initial state over time. Also, that steel in the CRCO reduced the horizontal movement due to temperature variation(4 times than that in the JCO). But, if interface is debonded, the roll decreased. Vertical VWG data showed that CRCO did not occur debonding problem at steel location, but there was some problem in JCO. It was confirmed by field coring. The tensile strain appeared in the CRCO, But the compressive strain occurred in the JCO in early age. Through the FWD test result, deflection in the CRCO was less than that in the JCO. And K value in the CRCO was greater than it in the JCO.

• The Korean Journal of Financial Studies
• /
• v.6 no.1
• /
• pp.23-45
• /
• 2000

기존연구에 의하면 무상증자의 공시는 공시기간 중 정(+)의 가격효과를 초래하는 것으로 나타나고 있다. 무상증자에 대한 이러한 시장의 호의적인 반응을 설명하기 위해 여러 가설이 제기되어 왔으며, 그 중 무상증자는 좋은 내부정보를 외부에 신빙성 있게 전달하는 신호기제가 될 수 있다는 신호가설이 특히 지지를 받고 있다. 그런데 짧은 공시기간 중의 정(+)의 주가반응만을 보고 신호가설이 지지된다고 단정짓는데는 무리가 있다. 본 연구에서는 과연 신호가설이 주장하는 것처럼 무상증자가 사업기회의 확대, 미래현금흐름의 증대, 추후 차입여력의 증대를 가져오는가를 더 면밀히 검증하기 위하여 무상증자 실시기업의 장기성과를 조사하였다. 본 연구의 특징은 (1)공시기간 이후의 1년 이내의 기간에 중점을 둔 대부분의 기존연구와 달리 증자 후 36개월간의 장기성과를 측정하였으며, (2)주가수익률 자료와 회계자료를 동시에 이용하여 장기성과를 조사하였고, (3)장기 초과수익률 측정과 검증에 있어 통계적 오류가 있는 누적초과수익률(CAR)을 보완하기 위해 매입보유초과수익률(BHAR)을 사용했으며, 이를 위해 엄격한 기준을 적용하여 표본기업과 비교기업을 선정하였다는 데 있다. 실증분석 결과 신호가설을 지지하는 증거는 발견하지 못하였으며 오히려 무상증자 실시기업이 시장평균 또는 비교기업인 비증자기업에 비해 장기적으로 주가수익률 및 영업성과에 있어 저성과를 보이는 증거를 상당 수 발견하였다. 구체적으로 동일가중평균수익률로 조정한 보유기간 초과수익률의 경우 증자 후 1개월에서 24개윌까지의 BHAR이 5% 미만 수준에서 부(-)의 값을 보였으며, 비모수통계치를 사용할 경우 $1{\sim}36$개월까지의 전기간에서 유의한 부(-)의 저성과를 보이고 있다. 또한 영업성과면에서도 증자기업이 비증자기업에 비해 증자 후 수익성과 현금흐름이 저조하게 나타나고 있다.해 현물시장의 수익률, 변동성이 높은 것으로 나타났으나, 변경후에는 현물시장에 비해 선물시장의 수익률 변동성이 높은 것으로 나타났다. VAR 분석에 의하면 변경후가 변경전에 비하여 선물이 현물을 선도하는 시차가 다소 커진 것으로 나타나 현물시장과 선물시장이 동시에 가격제한폭 확대후에 비효율적으로 되었다는 의미로 판단된다.기간에서는 선물의 15분 선도효과와 현물의 1분 선도효과가 발견되어 선물의 선도효과가 지배적임을 발견하였다.적 일정하게 하는 소비행동을 목표로 삼고 소비와 투자에 대한 의사결정을 내리고 있음이 실증분석을 통하여 밝혀졌다. 투자자들은 무위험 자산과 위험성 자산을 동시에 고려하여 포트폴리오를 구성하는 투자활동을 행동에 옮기고 있다.서, Loser포트폴리오를 매수보유하는 반전거래전략이 Winner포트폴리오를 매수보유하는 계속거래전략보다 적합한 전략임을 알 수 있었다. 다섯째, Loser포트폴리오와 Winner포트폴리오를 각각 투자대상종목으로써 매수보유한 반전거래전략과 계속거래 전략에 대한 유용성을 비교검증한 Loser포트폴리오와 Winner포트폴리오 각각의 1개월 평균초과수익률에 의하면, 반전거래전략의 Loser포트폴리오가 계속거래전략의 Winner포트폴리오보다 약 5배정도의 높은 1개월 평균초과수익률을 실현하였고, 반전거래전략의 유용성을 충분히 발휘하기 위하여 장단기의 투자기간을 설정할 경우에 6개월에서 36개월로 이동함에 따라 6개월부터 24개월까지는 초과수익률이 상승하지만, 이후로는 감소하므로, 반전거래전략을 활용하는 경우 주식투자기간은 24개월이하의 중단기가 적합함을 발견하였다. 이상의 행태적 측면과 투자성과측면의 실증결과를 통하여 한국주식시장에 있어서 시장수익률을 평균적으로 초과할 수 있는 거래전략은 존재하므로 이러한 전략을 개발 및 활용할 수 있으며, 특히, 한국주식시장에 적합한 거래전략은 반전거래전략이고, 이 전략의 유용성은

• Journal of the Korean association of regional geographers
• /
• v.2 no.2
• /
• pp.159-171
• /
• 1996

The aim of this study is which factors affect the commercial land values and how they act upon them through distribution of commercial land values by multiple regression analysis in Gwangju city. The major findings of this study are as follows: (1) The changes of commercial land values distribution in $1989{\sim}1996$, We see that the commercial area of higher land values extends following the main arterial road. This is related to urbanization in urban fringe while the decline of commercial land values occurs in city center with long history of commercial region. This is due to unsuitableness in rapid changes of commercial environment because of fragmented lots, old buildings. traffic congestion etc. (2) The regions where commercial land values greatly rose are the west in constructed the new planning city center of Sangmu-dong. and the south west in which is related to the extension of high density apartment and the location of big discount stores. (3) Through the changes in commercial land values distribution map. and road map, topographical map, we know that commercial land values is related to various factors; namely, distance from CBD, convenient traffic, reputation of commercial district, condition of a road, size of supplementary, a degree of commercial land use etc. (4) From the above related factor, six variables are extracted by operational definition. That is the spatial distance from the city center, the walking distance to a stopping place, the road width, the amount of bus traffic, the amount of pedestrian, the number of the shop. (5) Data of seven variables are collected on the highest values point of each Dong. We applicate multiple regression analysis with commercial land values as a dependent variable, extracted six variables as independent variables. (6) As a result of multiple regression on the determinants of commercial land values, the variables which is greatly related to commercial land values are the amount of pedestrain, the spatial distance from city center. We identify that two variables explain variance of the commercial land values by 65%. (7) In order to make clear about not explained 35%. we carry out analysis of residual. In consequence, we see small estimate in downtown area and large estimate in urban fringe. This feature is due to simple core structure of Gwangju city and limits of this regression model.

• Magazine of the Korea Concrete Institute
• /
• v.6 no.2
• /
• pp.138-147
• /
• 1994

The compressive strength of horizontal joints in precast concrete large panel structures depends on parameters such as grout and panel strength, detail of joint, joint moment, width of grout column, and etc. 44 specimens were tested to investigate the effects of parameters that influence the compressive strength of horizontal joints. The design formula specified in Korean Cock for compression horizontal joints must be reviewed, because it was based on the test results of the joint types not used in Korea. In this study comparing the test results, there fore, the validity of the design formulas was evaluated and a suitable formula was proposed to predict the ultimate strengths of compression horizontal joints. The increase of ultimate strengths was not observed, even if confined the horizontal displacement of slabs and reinforced the wall edge, when the grout strength is lower than panel strength. From the comparison of test results and those by the proposed formula, it was shown that proposed formula was suitable to predict the ultimate compressive strength of horizontal joints.

• The Journal of Engineering Geology
• /
• v.28 no.3
• /
• pp.397-409
• /
• 2018

Izumi sedimentary basin (ISB), west of Shikoku, Japan, is widely distributed across the western side of the Sakuragi Bend of the Japan Median Tectonic Line (MTL). It is not obvious how the ISB formed, but this feature is similar to an asymmetric pull-apart basin. The stratigraphic succession and tuff layers show that ages tend to decrease toward the Sakuragi Bend. We investigate whether the ISB is an asymmetric pull-apart basin using analogue model experiments with running sand. A pull-apart basin of length 60 cm and width 20 cm is formed, and secondary normal faults appear on the surrounding surface. A cross-section parallel to the direction of displacement shows that the stratigraphic succession of the pull-apart basin becomes younger toward the releasing bend. A listric normal fault, which has the opposite dip to the master fault, is observed in a cross-section perpendicular to the direction of displacement. These results are consistent with the observed properties of the ISB west of Shikoku, thereby supporting the possibility that the ISB is an asymmetric pull-apart basin.

• Journal of the Korean Society for Railway
• /
• v.12 no.5
• /
• pp.732-737
• /
• 2009

Wind tunnel testing on the real-scale pantograph for high-speed train has been conducted to investigate the aerodynamic characteristic of the pantograph at high-speed. The mid-scale subsonic wind tunnel of Korea Airforce Acamedy with 3.5m width, 2.45m height, and 8.8m length test section has been employed. The test model has been supported above 50cm height from the bottom of test section using vertical strut to eliminate the boundary layer generated from the bottom of the test section. The height of the pantograph has been varied in three cases, in both of the normal running and reverse running modes. The resultant lift forces of the pantograph to catenary system in all the cases have been measured and the relation between the test conditions and the lift forces have been extensively analyzed.

• Journal of the Korean Geotechnical Society
• /
• v.24 no.1
• /
• pp.119-130
• /
• 2008

Uncertainties in physical and engineering parameters for the design of shallow foundations arise from various aspects such as inherent variability and measurement error. This paper aims at investigating and reducing uncertainty from deterministic method by using the reliability-based design of shallow foundations accounting for the variation of various design parameters. A probability distribution type and statistics of random variables such as unit weight, cohesion, infernal friction angle and Young's modulus in geotechnical engineering are suggested to calculate the ultimate bearing capacities and immediate settlements of foundations. Reliability index and probability of failure are estimated based on the distribution types of random variables. Widths of foundation are calculated at target reliability index and probability of failure. It is found that application and analysis of the best-fit distribution type for each random variables are more effective than adoption of the normal distribution type in optimizing the reliability-based design of shallow foundations.

• Proceedings of the Korean Vacuum Society Conference
• /
• 1999.07a
• /
• pp.35-35
• /
• 1999

KSTAR NBI 장치의 진공용기와 Grid에 대하여 열 및 구조해석을 ANSYS 코드를 이용하여 수행하였다. 진공용기의 경우 진공용기 지지구조물을 최적화할 수 있는 구조형상에 관하여 연구하였고, Grid의 경우 Grid 형상 및 재료 특성에 중점을 두어 연구하였다. 또한 Electron Dump의 냉각수로의 위치 및 형상, 크기를 최적화시켰다. 이번 각 구조물의 최적화 연구에서 특히 중점을 둔 사항은 재료와 관련된 경제성이다. 진공용기에서 가장 문제가 되는 것은 용기의 크기에 따른 변형도이다. 진공용기의 Cryo-sorption 패널 배기속도는 30000 I/sec 이상이고, 진공 용기의 운전시 진공도는 5$\times$10-7Torr 이하이다. 구조해석의 결과로부터 폭 3m$\times$높이 4,m$\times$길이 5m, 두께 2cm인 진공용기는 대기압 하에서 7cm의 변형도를 갖는다. 변형을 최소화하기 위해 T형 보강구조물을 부착시켰을 때 변형도가 1cm 이하로 감소함을 볼 수 있었다. [그림1] 장시간 운전시 Grid에 미치는 열부하에 의한 영향을 연구하였다. 열해석 결과와 경제성, 가공성을 동시에 고려할 때 Grid의 재질로 무산소동이 적합함을 알 수 있었다. 한편, NBI 장치에서 열부하가 최대인 곳은 이온원의 Electron Dump 부분으로 중심부분에서 20MW/m2이다. 열부하를 효과적으로 소산시키기 위해 Electron dump 의 중심부분 모양을 깔대기 모양으로 만들어 Dump 뒷부분의 자석에 미치는 영향을 최소화 시켰다. 이 때 냉각수록의 냉각수 흐름속도 4.5m/sec이고, 자석의 최대 온도는 15$0^{\circ}C$로써 자석의 기본성질을 일어버리지 않는 허용범위 내에 들어옴을 알 수 있었다. 자석의 온도는 10초 동안 급격히 상승하였고, 100초 이후에 포항상태에 도달하였다 [그림2]

• Journal of the Microelectronics and Packaging Society
• /
• v.30 no.3
• /
• pp.88-93
• /
• 2023

As the demand for High Bandwidth Memory (HBM) increases and the handling capability of larger wafers expands, ensuring reliable Total Thickness Variation (TTV) measurement for stacked wafers becomes essential. This study presents the design of a measurement module capable of measuring TTV across the entire area of a 300mm wafer, along with estimating potential mechanical measurement errors. The module enables full-area measurement by utilizing a center chuck and lift pin for wafer support. Modal analysis verifies the structural stability of the module, confirming that both the driving and measuring parts were designed with stiffness exceeding 100 Hz. The mechanical measurement error of the designed module was estimated, resulting in a predicted measurement error of 1.34 nm when measuring the thickness of a bonding wafer with a thickness of 1,500 ㎛.

• Science of Emotion and Sensibility
• /
• v.11 no.4
• /
• pp.531-540
• /
• 2008

This study, based on the college life style and the courage to make that the purpose of the design process of finding out the correlation. Chinese students study the life style can be categorized into 4 kinds. The courage to top a crowded bottom with a broad form of courage prefer to be brought down, getting smaller and smaller. Regular and relevant inclination stores are independent of trust. 2 as a whole are crowded with smooth curves and the courage to the asymmetric shape is preferred. Active investment, emphasis on foreign languages, tends to prefer shopping on the Internet were related.3 outstanding courage, just a little crowded in the cylindrical form is preferred. Trust the big stores, stores see the taste, his taste for products that are relevant to the tendency of pursuing said. 4, a lot of the colony gradient technique Protruding prefer to be in the form of courage. Home will, that tends to emphasize the brand and design were related. Home will, that tends to emphasize the brand and design were related. To recap the contents of the consumer lifestyle, based on the characteristics of their favorite cosmetics containers vary designs. Different forms, depending on their courage to feel emotions that can see the image. Therefore, the design in courage cosmetics on the characteristics of these granular for consumer research, the granular form of product research and the relationship between the elements in their care are made. The marketing strategy is in the consumer market, but needs more fine-grained analysis methods that can tell people.