• Journal of the Korean association of regional geographers
• /
• v.15 no.1
• /
• pp.161-178
• /
• 2009

The introduction of a world geodetic system for cadastral survey will be started the enactment of the law on survey, hydro-graphical examination and cadastre. However, the cadastral control points are not homogeneous and correspond with national control points because of various reasons. To cope with this problem, the 1,600 high accurate control points, which can be interlocked with national GPS control points, has selected from existing 20,000 cadastral control points. These selected control points were calculated as an accurate world geodetic system and it makes a homogeneous cadastral survey network. Through these measures, for the future carrying out national project, this study will be effectively contributed to establish the cadastral infrastructures for the Korea cadastral reform project.

• Journal of Korean Society for Geospatial Information Science
• /
• v.22 no.1
• /
• pp.31-39
• /
• 2014

The trend of information service and its utilization has been gradually evolving due to the technological breakthrough in IT industries and the spread of smart phones. Especially regarding smart phones, a vast array of applications are being developed and employed for the purpose of providing real time information. Recently, numerous studies have been made and applied in regards to the efficient management and the supply of cadastral control point information. This research has developed and applied the NFC Cadastral Control Point, an advanced version of QR code Cadastral Control Point, which is installed and utilized in Dong-gu Ulsan, Korea, and an application that can utilize both the QR code and the NFC. In addition, this research continues on to analyzing the utility of the two methods that the survey use of a General Cadastral Control Point and the NFC Cadastral Control Point. Having implemented both methods, NFC Cadastral Control Point outweighed its counterpart in terms of the damage it gets from the outside influence and availability. Moreover, through developing Cadastral Control Point that could apply both the QR code Cadastral Control Point and NFC Cadastral Control Point, the research saw tremendous improvements compared to the survey method using the previously existing reference point performance. The results conveyed the fact that cadastral information application was time saving, convenient, and efficient in terms of finding information. Henceforth, with government's administration over Cadastral Control Point and with the development of more application for providing information, a nation-wide monitoring of Cadastral Control Point is considered possible and an efficient usage of information service is expected as well.

• Proceedings of the KAIS Fall Conference
• /
• 2011.05b
• /
• pp.732-735
• /
• 2011

본 연구는 경상남도 창원시 삼각점의 GPS 데이터를 활용하여 오차수준 및 지역적인 특성 등을 종합적으로 분석하여 봄으로써 향후 지적세부측량을 위한 지적기준점측량 수행 시 보다 정확한 성과가 산출될 수 있는 방안을 모색하여 보고자 하였다. 연구결과, 토지조사사업 당시 설치된 삼각점의 경우 삼각점 자체의 자연적 인위적 이동이 없을 경우 대부분 삼각점의 성과가 안정적으로 나타나므로 지적기준점 성과결정시 기지점으로 사용할 삼각점은 토지조사 당시 설치된 삼각점을 우선적으로 선정하여야 할 것으로 판단되었다. 또한 본 연구결과에서 안정적인 성과로 제시된 삼각점을 기준으로 하여 지적기준점의 성과를 결정할 경우 향후 지적기준점이 망실되어 재설치 하더라도 항상 동일한 측량성과를 유지 관리할 수 있을 것으로 보인다.

• Journal of Korean Society for Geospatial Information Science
• /
• v.19 no.4
• /
• pp.127-138
• /
• 2011

This study aimed at suggesting the possibility of an application that connects cadastral control point and urban control point. In order to do this, we calculated and analyzed the cadastral coordinate on urban control point by using the GPS observation data of Changwon-si urban control point (32 points) which was announced based on the result of global coordinate system. We calculated cadastral coordinate through using three different kinds of calculation S/Ws, and compared the results of the calculation with the preexisting result of urban control point. The comparison suggested that the gap between the new results and the existing results is in the range of error specified by a law. Therefore, the result can be used in cadastral surveying. However, for the safe application in practical works, we suggested that it would be better to carry out new cadastral surveying and use its result than to use the result of the current urban control point directly in surveying cadastral. In addition, we suggested that it is necessary to examine precisely the local station of triangulation. Finally, we recommended that one should use trilateral network adjustment S/W as one's calculation S/W.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.25 no.4
• /
• pp.309-317
• /
• 2007

Cadastral control points in Korea are refered to various origins, for example an early separated small triangulation, a separated small triangulation, a separated control surveying origin and an unified origin. Cadastral map with early separated small triangulation origin have difficulties to connect with national GIS data by refered an unified origin. We determined transformation parameters from old origin to unified origin using 2D conformal transformation method. To evaluate of transformation accuracy, we compared with GPS field surveying results. And we experiment on coordinate transformations with unified results between the local geodetic datum and the new Korea geodetic datum.

• Journal of Cadastre & Land InformatiX
• /
• v.53 no.2
• /
• pp.93-106
• /
• 2023

The objective of this study is to improve the survey rate and reliability of survey control point marks, which serve as the foundation for location-based services. Within the scope of this research, we have inspected the current status and reporting systems for national control point marks, public control point marks, and cadastral control point marks, identifying various issues. To tackle these challenges, we have prepared proposals for new unit cost calculations for national control point mark inspections, enhancements to the inspection and reporting systems for survey control point marks, and preliminary reporting procedures for surveyors using these control point marks. Additionally, we have established a workflow to refine the process of survey control point mark inspections and have proposed an automated system for calculating the unit cost for unreported targets. The study anticipates that these changes will improve the efficiency of future survey control point mark inspection tasks.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.8
• /
• pp.3478-3485
• /
• 2011

This study utilized the GPS data of the stations of triangulation of Changwon-si, Gyeongsangnam-do to conduct comprehensive analysis on tolerance level and regional characteristics. Based on this analysis, it was attempted to seek the method to derive more accurate result when further performing cadastral control point surveying for cadastral detail surveying. For the stations of triangulation installed at time of the land survey project, the study result showed that the most results of the stations of triangulation are stable if they were not moved naturally or artificially by themselves. Therefore, it was concluded that the stations of triangulation installed at the time of the land survey project should be preemptively selected for use of the given points when making decision of result of cadastral control point surveying. In addition, if the result of the cadastral control point surveying is made decision based on the stations of triangulation presented as the stable result in this study result, it seems that the same surveying result will be maintained and managed at all time, even if they are going to be further reinstalled due to loss of them.

• Journal of Korean Society for Geospatial Information Science
• /
• v.21 no.1
• /
• pp.65-75
• /
• 2013

In this study, one of the main aims is to build up a technical foundation for promoting the cadastral resurvey effectively and to improve the accuracy of cadastral surveying is to make use of precise surveying techniques in allowance of position errors as reference accuracy in cadastral resurvey, which is proper to obtain the sufficient accuracy of the cadastral control points, and parcel boundary points by introducing the GNSS-based surveying techniques on cadastral survey. In detail, the existing procedures and outcomes of cadastral survey were compared and analyzed for suggesting a better survey technique than that of the other techniques in a variety of aspects of capability of cadastral survey. The new skills and supports could be upmost importance when doing cadastral survey. What's more, essentially, 'The Measurement Department' makes all the efforts to establish 'The Surveying Regulations'. This could possibly apply GNSS-based surveying technique to the cadastral resurvey for the foreseeable future and this research paper suggested that how to improve absolute accuracy of cadastral reference points by means of putting to use the appropriate models of measurement further.

• Journal of Korean Society for Geospatial Information Science
• /
• v.23 no.2
• /
• pp.79-88
• /
• 2015

In any production and construction of geospatial information covering surveying, survey control point is a vital geospatial information. Survey control points in South Korea are currently classified as following: national control points, public control points, and cadastral control points. Each of these different categories of survey control points act as a basis and sets perimeters for the production, management and operation of subjects within the category. Universal standard, the unified format between different survey control points, also, are not yet defined, causing difference in basic information provided by altering categories and disturbance in connecting, managing, utilizing and operating survey control points. Establishment of a standard regarding survey control points, is therefore required for the efficacy of their utilization. This study, to solve such inadequacies, selects management items for creation of standardized survey control point, by investigating domestically and internationally the status of operating survey control points, determining data model for management, establishing TTA and agency standards, and establishing of activation methodology for survey control point standards.

• Journal of Korean Society for Geospatial Information Science
• /
• v.15 no.3
• /
• pp.41-49
• /
• 2007

In this study, the software to compute Bessel coordinates by trilateration adjustment was developed, and the software was used to determine coordinates of the cadastral control points over the southern Korean peninsula. The baseline measured by GPS was reduced to the distance on geoid surface by applying PNU95 geoid model, and the distance on geoid surface was reduced to the plane grid distance by applying scale factor of map projection of Bessel coordinates. Using the plane grid distance, Bessel coordinates of 32 CORS (Continuously Operating Reference Station) were computed by free adjustment at first, and then the coordinates of the cadastral control points were computed by joining the control points to adjacent CORS. The result shows a possibility of construction of highly accurate and consistent cadastral survey network with coordinate error less than 1ppm of distance, when newly computing the coordinates of the control points by using distances measured by GPS.