• Title/Summary/Keyword: 지연 부하

Search Result 1,329, Processing Time 0.025 seconds

An Intra-path Load Balancing Method based on both the Bottleneck State of Path and the Bandwidth Avaliability of Link (경로 병목상태와 링크 대역폭 가용도 기반 경로 부하 밸런싱 방법)

  • Kim, Tae-Joon
    • Journal of Korea Multimedia Society
    • /
    • v.12 no.3
    • /
    • pp.409-418
    • /
    • 2009
  • Providing Quality-of-Service (QoS) guarantee requires for each router on the path of a traffic flow not to violate the flow's delay budget allocated to itself. Since the amount of load being offered to the router is determined by the budget, some imbalance in load among routers on the path may be alleviated by means of adjusting the budget. The equal allocation applied to the resource reservation protocol (RSVP) is simple to implement, but it has the drawback of a poor resource utilization. A load balancing method in which the delay budget being allocated to a router depends on its load state was developed to improve the drawback, but it's too complex to apply to the RSVP. This paper proposes an intra-path load balancing method not only applicable to the RSVP but also more effective in improving the drawback. The proposed method first partitions the end-to-end delay bound of a flow to routers by the RSVP and then let them adjust their budgets according to both the bottleneck state of the path and their links' bandwidth availabilities. The results of the simulation applying the proposed method to an evaluation network showed that the proposed method may provide the gain of 4 ${\sim}$ 17 % compared to that in the legacy one in terms of the number of maximally admittable flows.

  • PDF

Delay Performance Analysis of Signalling Network Functions in Common Channel Signalling System (공통선 신호 시스템에서 신호망 기능부의 지연 성능 분석)

  • 박철근;정태욱;이유태
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.25 no.7B
    • /
    • pp.1226-1235
    • /
    • 2000
  • 신호망에서의 지연은 망관리 행위의 응답시간에 직접적인 영향을 미치기 때문에 모든 제어정보는 가장 효과적으로 전송되어야 한다. 신호망이 효율적으로 운용되는지 뿐만 아니라 신호망의효과적인 설계를 위해서 신호시스템의 성능을 아는 것이 매우 중요하다. 본 논문에서는 공통선 신호 시스템의 신호망 기능부의 지연 성능을 분석하였다. 분석은 ITU-T 규격을 기반으로 다른 계층의 프로토콜에 독립적인 큐잉모델을 만들어 대기체계분석을 통하여 이루어졌다. 또한 신호망 기능부가 신호 메시지 처리부와 신호망 관리부로 나누어져 구성되는 것도 고려하여 모델링하였다.

  • PDF

Improvement of Linearity in Delay Cell Loads for Differential Ring Oscillator (지연 셀의 부하 저항 선형성을 개선한 차동 링 발진기)

  • 민병훈;정항근
    • Journal of the Institute of Electronics Engineers of Korea SC
    • /
    • v.40 no.6
    • /
    • pp.8-15
    • /
    • 2003
  • In this paper, the issue of the differential ring oscillator in designing low phase noise is linearity improvement of delay cell's load resistor. A novel differential delay cell that improves on the Maneatis load is proposed. The linearity improvement of load resistor results in lower phase noise in ring oscillator. For comparison of the phase noise characteristics, Ali Hajimiri's phase noise model is used. In order to have a low ISF(impulse sensitivity function), it is important to have a symmetry between rise time and fall time of oscillation waveform. The ISF value of ing oscillator based on the proposed delay cell is lower than that of the existing ring oscillators. Due to this result, the phase noise is improved by 2~3dBc/Hz for the same power dissipation and oscillation frequency.

Multipath-based Routing Protocol with Load Balancing Function in Wireless Ad-hoc Network Environments (무선 ad-hoc 네트워크 환경에서 다중경로를 이용한 부하균형 라우팅 프로토콜)

  • 정수진;조현진;김문정;엄영익
    • Proceedings of the Korean Information Science Society Conference
    • /
    • 2004.10c
    • /
    • pp.295-297
    • /
    • 2004
  • 무선 ad-hoc 네트워크란 기반 시설의 도움 없이 노드들 간의 수평적인 통신을 제공하는 임시적인 네트워크이다. 이러한 네트워크 환경에서는 각 노드의 네트워크 창가 밀 이탈이 동적으로 가능하다. 현재 이러한 환경에서 높은 이동성을 지원하는 동시에 라우팅 오버헤드를 최소화하는 연구가 활발히 진행되고 있다. 기존에 제안된 무선 ad-hoc 라우팅 프로토콜들은 부하균형 메커니즘을 지원하지 않으므로 특정 노드에 많은 부하가 발생할 수 있다. 이로 인해 종단 간 지연시간이 길어지며 네트워크의 신뢰성이 낮아질 수 있다. 본 논문에서는 이러한 문제의 해결을 위해 각 노드가 자신의 부하를 측정하고, 경로 요청 시 노드의 부하 정보를 이용해서 부하가 적은 경로를 선택하도록 한다. 또한 데이터 전송 중에 해당 경로의 부하를 확인하여, 보조 경로를 이용하거나 새로운 경로를 검색하여 경로의 혼잡을 해결함으로써 종단 간 지연시간 및 네트워크의 신뢰성을 향상시키는 기법을 제안한다. 본 논문에서 제안하는 기법은 특정 노드에 라우팅 오버헤드가 집중되는 것을 방지하며 이로 인해 종단 간 지연시간을 줄이고 네트워크의 신뢰성 을 향상시킨다.

  • PDF

The effect of loading time on the stability of mini-implant (교정력 부하시기에 따른 교정용 미니 임플란트의 안정성)

  • Lee, Seung-Yeon;Cha, Jung-Yul;Yoon, Tae-Min;Park, Young-Chel
    • The korean journal of orthodontics
    • /
    • v.38 no.3
    • /
    • pp.149-158
    • /
    • 2008
  • Objective: The purpose of this study was to investigate the stability of mini-implants in relation to loading time. Methods: A total of 48 mini-implants (ORLUS, Ortholution, Korea) were placed into the buccal alveolar bone of the mandible in 8 male beagle dogs. Orthodontic force (200-250gm) was applied immediately for the immediate loading group while force application was delayed for 3 weeks in the delayed loading group. For the subsequent loading periods (3, 6, 12 weeks), BIC (bone implant contact) and BV/TV (bone volume/total volume) and mobility test were carried out. Results: The immediate loading group showed no changes in BIC from 3 to 12 weeks, while the delayed loading group showed a significant increase in BIC between 3 and 12 weeks (p<0.05). The BV/TO of the delayed loading group significantly increased from 6 to 12 weeks of loading (p<0.05), while the BV/TV of the immediate loading group decreased from 3 to 12 weeks of loading. However, there was no significant difference in BV/TV between experimental groups. The mobility of the immediate loading group was not significantly different from that of the delayed loading group after 12 weeks of loading (p<0.05). Conclusions: These results showed that immediate loading does not have a negative effect on the stability of mini-implants compared to the early loading method in both the clinical and histomorphometric point of view.

Cracking in Welds and Its Prevention(V) - Cold Cracking in Welds(I) - (용접부의 균열 및 그 방지(V) - 저온균열(I) -)

  • 박화순
    • Journal of Welding and Joining
    • /
    • v.20 no.5
    • /
    • pp.52-54
    • /
    • 2002
  • 저온균열은, 대한용접학회에서 발간한 '용접.접합용어사전'에 의하면, '용접 후 용접부의 온도가 대체로 $200^{\circ}C$ 이하의 저온에서 발생하는 균열을 총칭한다. 경우에 따라서는 실온까지 냉각한 후 일정한 기간이 경과한 후에 발생하기도 하며, 이러한 균열을 지연균열(delayed cracking)이라고 한다'로 되어 있다. 이들 저온균열의 발생에는 주로 구속응력과 경화조직 및 확산성수소가 영향을 미치고 있으며, 그 종류는 위에서 언급한 지연균열 외에 라멜라 테어링, 변형균열, 칭균열형 저온균열 등이 있다. 본 기술강좌에서는 용접부의 저온균열에 대하여 지연균열과 그 외의 저온균열로 나누어 2회에 걸쳐 소개하기로 한다.하기로 한다.

Concurrency Control and Recovery Method of B+-Tree using Bulk Loading and Extended Lazy Deletion (일괄구성과 확장된 지연삭제를 이용한 B+-Tree의 동시성 제어 및 회복)

  • 김대일;김성희;조숙경;배해영
    • Proceedings of the Korean Information Science Society Conference
    • /
    • 2000.04b
    • /
    • pp.128-130
    • /
    • 2000
  • B+-Tree는 데이트베이스 관리 시스템에서 대용량의 데이터를 관리하기 위해 가장 널리 사용되는 인덱스이다. 그런 기존의 B+-Tree는 데이터베이스의 초기 구성 및 재구성시 많은 비용이 들고, 또한 삭제 연산의 빈번한 발생시 색인 구조 변경연산의 발생빈도가 높아져 동시성이 떨어진다는 단점이 있다. 이러한 문제점을 해결하기 위해서 기존 대부분의 데이터베이스 관리시스템에서는 일괄구성과 지연삭제를 이용하고 있으나, 동시성 및 회복에 대한 처리가 미흡하여 실제 시스템에 적용하기에는 문제가 있다. 따라서 본 논문에서는 일괄구성과 지연삭제 방법을 적용한 B+-Tree에서의 동시성 및 회복기법을 제안한다. 제안된 기법은 일괄구성 시에 잠금의 부하와 연속적인 철회(Cascade Rollback)가 없고, 또한 지연 삭제기법을 확장함으로써 빈 페이지 리스트 관리에 대한 부하가 없으며, 삭제 연산에 대한 회복 시 논리적 복귀(Logical Undo)가 빨라지고 구현이 간단해진다는 장점이 있다.

  • PDF

Delay Analysis of Paging Channel Messages (페이징 채널 지연시간 분석)

  • 정용주
    • Proceedings of the Korean Operations and Management Science Society Conference
    • /
    • 2000.04a
    • /
    • pp.220-222
    • /
    • 2000
  • 이동통신 시스템에서 가입자수가 증가하고 다양한 서비스가 구현됨으로써 전체적인 장비 또는 자원에 대한 부하가 증가하고 있다. 특히, 셀의 반경이 작아지고 단문(Short Message)을 활용한 다양한 부가 서비스가 개발됨으로써 이와 관련된 정보를 전달하는 페이징 메시지의 분류도 복잡해지고 페이징 채널의 부하도 커지고 있다. 본 연구에서는 먼저, 이동통신시스템에서 페이징 패널의 구조와 역할을 분석하고 페이징 채널에서 전송하는 메시지를 그 기능과 특성에 따라 분류한다. 긴급하게 전송되어야 하는 메시지를 보호하기 위한 우선권 부여 방법을 모색하고, 각 방법에 있어서 메시지 종류별 전송지연시간(Delay)을 수리적으로 도출하고 결과를 비교한다.

  • PDF

A Study for the application of UVLS in KEPCO System (한전계통에서 저전압 부하차단의 기법 연구)

  • Lee, Sang-Ho;Kang, Sang-Hee;Lee, Sung-Jin;Oh, Hwa-Jin;Jang, Byung-Tae
    • Proceedings of the KIEE Conference
    • /
    • 2003.11a
    • /
    • pp.10-13
    • /
    • 2003
  • 계통에 발생하는 불안정 현상을 억제하기 위한 방법으로 저주파수 부하차단과 저전압 부하차단이 있다. 저전압 부하차단은 저주파수 부하차단에 비해 지역적 특성이 강하기 때문에 일반적인 기준이 제시되어 있지 않다. 본 논문에서는 정적 모의를 통하여 저전압 기준치를 결정하는 기법을 제안하고 동적 모의를 통하여 이를 검증하고 시지연값도 결정하도록 하였다.

  • PDF

A Intra-media Synchronization Scheme using Media Scaling (서비스 품질 저하 기능의 미디어내 동기화 방안)

  • 배시규
    • Journal of Korea Society of Industrial Information Systems
    • /
    • v.4 no.4
    • /
    • pp.1-6
    • /
    • 1999
  • When continuous media are transmitted over the communication networks, asynchrony which can not maintain temporal relationships among packets my occur due to a random transit delay. There exist two types of synchronization schemes ; for guaranteed or non-guaranteed resource networks. The former which applies a resource reservation technique maintains delay characteristics however, the latter supply a best-effort service. In this paper, I propose a intra-media synchronization scheme to transmit continuous media on general networks not guaranteeing a bounded delay time. The scheme controls transmission times of the packets by estimating next delay time with the delay distribution So, the arriving packets my be maintained within a limited delay boundary, and playout will be performed after buffering to smoothen small delay variations. To prevent network congestion and maintain minimum quality of service the transmitter performs media scaling-down by dropping the current packet when informed excessive delay from the receiver.

  • PDF