• Journal of Internet Computing and Services
• /
• v.14 no.4
• /
• pp.13-24
• /
• 2013

IEEE 802.15.4 network and WiFi network are installed to overlap each other and configured to use adjacent frequency bands in which case the communication service required by applications can not be guaranteed because of randomly increased frame transmission delay and frequent frame transmission failures at nodes in IEEE 802.15.4 network. In this paper, transmission delay model at IEEE 802.15.4 nodes and an experimental system to evaluate the interference from WiFi traffic are described, then elements for the evaluation of interference are measured with the analysis of their characteristics. A sequential method of using medium access layer and physical layer elements of IEEE 802.15.4 protocols is proposed to decide interference from WiFi network. With the proposed method, if an evaluation function having frame transmission failures and transmission delay as variables returns a value greater than a threshold, intensive measurements of wireless channel power are carried out subsequently and the final decision of interference is made by the calculated average channel power. Experimental results of the method show that the decision time is reduced with increased frequency of decision in comparison to an other similar method.

• The Transactions of the Korea Information Processing Society
• /
• v.7 no.4
• /
• pp.1211-1216
• /
• 2000

Asynchronous transfer mode (ATM) can be efficiently used to transport packet data services. The switching system will support voice and packet data services simultaneously from end to end applications. To guarantee quality of service (QoS) of the offered services, source rateot send packet data is needed to control the network overload condition. Most existing control algorithms are shown to provide the threshold-based feedback control technique. However, real-time voice calls can be dynamically connected and released during data services in the network. If the feedback control information delays, quality of the serviced voice can be degraded due to a time delay between source and destination in the high speed link. An adaptive algorithm based on the optimal least mean square error technique is presented for the predictive feedback control technique. The algorithm attempts to predict a future buffer size from weight (slope) adaptation of unknown functions, which are used fro feedback control. Simulation results are presented, which show the effectiveness of the algorithm.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.9C
• /
• pp.778-785
• /
• 2010

This paper proposes a high-precision ranging scheme based on channel estimation technique and multipath delay analysis in IR-UWB systems. When the IR-UWB signal is transmitted and received, the high-precision ranging is estimated with the time-of-arrival information of the signal. In the proposed scheme, the channel estimation process with the minimum mean square error technique or zero forcing technique is performed and the overlapped multipath within the pulse is analyzed with matrix pencil (MP) algorithm to achieve the ranging accuracy of centimeters. The performance of proposed scheme is evaluated with various IEEE 802.15.4a channel models and the relationship between the ranging performance and the computational complexity is analyzed in terms of the MP parameter values.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.37 no.3
• /
• pp.44-54
• /
• 2000

In this paper, a design methodology for the frequency-adaptive negative-delay circuit which can be implemented in standard CMOS memory process is proposed. The proposed negative-delay circuit which is a basic type of the analog SMD (synchronous mirror delay) measures the time difference between the input clock period and the target negative delay by utilizing analog behavior and repeats it in the next coming cycle. A new technology that compensates the auxiliary delay related with the output clock in the measure stage differentiates the Proposed method from the conventional method that compensates it in the delay-model stage which comes before the measure stage. A wider negative-delay range especially prominent in the high frequency performance than that in the conventional method can be realized through the proposed technology. In order to implement the wide locking range, a new frequency detector and the method for optimizing the bias condition of the analog circuit are suggested. An application example to the clocking circuits of a DDR SDRAM is simulated and demonstrated in a 0.6 ${\mu}{\textrm}{m}$ n-well double-poly double-metal CMOS technology.

• 전자공학회논문지 IE
• /
• v.46 no.2
• /
• pp.33-45
• /
• 2009

In this paper, the implementation of the backward movement control of a truck-trailer type mobile robot using fuzzy model based control scheme considering the practical constraints, computing time-delay and quantization is presented. We propose the fuzzy feedback controller whose output is delayed with unit sampling period and predicted. The analysis and the design problem considering the computing time-delay become very easy because the proposed controller is syncronized with the sampling time. Also, the stability analysis is made when the quantization exists in the implementation of the fuzzy control architectures and it is shown that if the trivial solution of the fuzzy control system without quantization is asymptotically stable, then the solutions of the fuzzy control system with quantization are uniformly ultimately bounded. The experimental results are shown to verify the effectiveness of the proposed scheme.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.4A
• /
• pp.378-383
• /
• 2004

Orthogonal Frequency Division Multiplexing (OFDM) transmits high-speed data by splitting the transmission bandwidth into a number of subcarriers. The bandwidth of each subcarrier is ensured to be smaller than the coherence bandwidth. This paper presents an OFDM system incorporated with the Carrier Interferometry (CI) codes to improve the performance by enhancing frequency diversity effect. The performances of CI-OFDM with multilevel modulations are investigated in highly dispersive fading channels. For the investigation of performance improvement of CI-OFDM, a simulator has been developed using a well-known SPW simulation platform. The simulation results show that the CI-OFDM provides both performance improvement and robustness against dispersive fading channel behavior. The performance of CI-OFBM with multilevel modulations demonstrates that CI-OFDM outperforms a traditional OFDM system, particularly in highly dispersive channels. With a relatively large delay spread of 151㎱ compared to the guard interval of 800㎱, CI-OFDM provides a BER of 10$^{-3}$ if sufficient signal power is present.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.44 no.5
• /
• pp.7-15
• /
• 2007

In wireless communication networks, single-radio single-channel architecture degrades throughput and end-to-end delay due to half-duplex transmission of wireless node and route intra interference. Also, In contention-based MAC (Medium Access Control) architecture, channel contention reduces throughput and packet collision enlarges end-to-end delay. In this paper, we use multi-radio multi-channel architecture which will make wireless node to operate in full duplex mode, and exclude route intra interference. Based on this architecture, we propose a new link metric, ccf which reflects the characteristics of a contention-based wireless link, and propose a routing path metric MCCR considering channel switching delay and route intra interference. MCCR is compared with MCR by simulation, the performance of a route established by MCCR outperforms the performance of a route by MCR in terms of throughput and end-to-end delay.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.45 no.5
• /
• pp.117-124
• /
• 2008

In this paper, the call setup performance of the CSCF(Call Session Control function) that manages the session control in providing the IMS(IP Multimedia subsystem)-based multimedia service in the BcN(Broadband convergence Network) is analyzed. While the performance related with the call/session of the SIP-Based voice service is analysed, the study for the call recessing performance of the IMS-based multimedia service is insufficient. In this paper, as, the processing capacity and subscriber number of CSCF were changed, the call setup delay time according to the session setup procedure of IMS was measured using the M/M/1 queuing model and OPNET simulation. The experimental results show that the sudden increased delay showed up in case the session establishment requirement ratio of total users over 13% of the CSCF processing capacity. Therefore, the user number and capacity of CSCF suitable for the session establishment delay threshold can be calculated or estimated.

• Journal of KIISE:Computer Systems and Theory
• /
• v.29 no.12
• /
• pp.655-664
• /
• 2002

In many data-parallel applications massive parallelism can be easily extracted through data distribution. But it often causes very long communication latency. This paper shows that task parallelism, which is extracted from data-parallel programs, can be exploited to hide such communication latency Unlike the most previous researches over exploitation of task parallelism which has not been considered together with data parallelism, this paper describes exploitation of task parallelism in the context of data parallelism. PCFG(Parallel Control Flow Graph) is proposed to represent a multithreaded program consisting of a few task threads each of which can include a few data-parallel loops. It is also described how a PCFG is constructed from a source data-parallel program through HDG(Hierarchical Dependence Graph) and how the multithreaded program can be constructed from the PCFG.

• The KIPS Transactions:PartC
• /
• v.16C no.3
• /
• pp.373-382
• /
• 2009

we present more efficient method of a medium access for real-time ubiquitous sensor networks. Proposed MAC protocol is like the randomized CSMA/CA protocol, but unlike previous legacy protocols, it does not use a time-varying contention window from which a node randomly picks a transmission slot. To reduce the latency for the delivery of event reports from sensor nodes, we carefully decide to select a fixed-size contention window with non-uniform probability distribution of transmitting in each slot. We show that the proposed method can offer up to several times latency reduction compared to legacy of IEEE 802.11 as the size of the sensor network scales up to 256 nodes using a widely-used network simulation package, NS-2. We finally show that proposed MAC scheme comes close to meet bounds on the best latency being achieved by a decentralized CSMA-based MAC protocol for real-time ubiquitous sensor networks which is sensitive to latency.