• Spatial Information Research
• /
• v.23 no.1
• /
• pp.59-68
• /
• 2015

As part of an effort to leap smart cadastre system by doing rearrangement of various mismatches in the land register, the cadastre renovation project is being recently conducted. In response to this demand, this paper proposes an image-based rapid parcel boundary demarcation plan using the high resolution aerial image with a GSD (Ground Sample Distance) of 5cm that matches to real ground boundary situation in residential area. To review the feasibility and accuracy of this proposed methodology, we compared the accuracy of parcel boundary point and parcel area extracted from the digital stereo plotting on the basis of results of cadastral boundary surveying and land register over the selected two test areas. The comparative accuracy result of all boundary points by digital stereo plotting is satisfied with accuracy requirement according to the criteria of the enforcement regulation of cadastral surveying, whereas it exceeded allowable error of ${\pm}0.07m$, more strictly specified in the Special Act on Cadastral Renovation. And about 20% of the total 70 parcels extracted by digital plotting are out of area tolerance in Jecheon study area, and 10% of the total 19 parcels in Suwon study area. The parcels exceeding accuracy limit are mostly due to the occlusion caused by building roof or eaves, and the obstacles such as trees existing on the boundary. Furthermore, an object identification is impossible in image because of vague boundary reference in case of nonexistence of man-made structures or natural features. Therefore, the utilization of boundary identification stickers is recommended as a solution for these types of land parcel.

• Proceedings of the Korean Information Science Society Conference
• /
• 2005.11b
• /
• pp.934-936
• /
• 2005

본 논문에서는 피라미드 계층간에 나타나는 잡음 신호의 특성을 바탕으로 라플라시안 피라미드를 이용한 X-ray 영상의 잡음 제거 방법을 제안한다. 제안하는 방법은 잡음 제거를 위해 X-ray 영상 신호의 지역적 표준 편차와 신호의 영역적 특징을 이용하였다. 지역적 표준 편차는 영상의 경계선 정도와 비례하는 특징을 가지기 때문에 지역적 표준 편차를 이용하여 경계 정보의 손실을 막았다. 또한 라플라시안 피라미드의 각 계층에 잡음 신호가 좁은 면적을 가지며 분포되는 영역적 특징을 이용하여 평평한 지역에서 잡음 신호의 제거 성능을 높였다. X-ray영상 및 잡음이 첨가된 표준 영상에 대한 실험을 통해 제안된 방법이 경계 정보의 유지와 잡음 제거에서 기존의 방법보다 향상된 성능을 보임을 확인하였다.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.16 no.1
• /
• pp.9-15
• /
• 1998

Numerical cadastral surveying method has advantages of higher accuracy and less individual error than planetable surveying method if we consider the result of surveying at the same area. Now in the areas where they use numerical cadastral records, coordinate is the basis when the boundary location is registered in numerical cadastral re-cords or is reconstructed on land surface, and this coordinate represents simply the absolute locational relationship with respect to origin point. But when we register the cadastral boundary location in cadastral or reconstruct it on land, relative relationship with respect to traverse point is more advisable basis than absolute relationship with respect to orgin point. This study contributes to the numerical cadastral surveying by discussing the problems to be improved that the principle of coordinate based boundary location registration and reconstruction has.

• Proceedings of the Korean Information Science Society Conference
• /
• 2000.04b
• /
• pp.592-594
• /
• 2000

변형모델(deformable model)은 볼륨의료영상(volumetric medical image)으로부터 복잡한 인체기관의 3차원적 경계를 분할해내기 위해 효과적인 방법을 제공한다. 그러나, 기존 변형모델은 초기와 의존성, 오목한 경계(concavity) 분할의 비적합성, 그리고 모델내 요소간 자체교차(self-intersection)의 제한점을 가지고 있었다. 본 연구에서는 이러한 제한점을 극복하고, 오목한 구조를 포함하는 복잡한 인체기관의 경계를 분할하기에 적합한 새로운 변형모델을 제안하였다. 제안한 변형모델은 볼륨영상 피라미드(pyramid)를 기반으로 다해상도(multiresolution)의 모델 정제화(refinement)를 수행한다. 다해상도 모델 정제화는 전역적 시셈플링(global resampling) 및 지역적 리샘플링(local resampling)를 통하여 저해상도의 모델로부터 점차 고해상도의 모델로 이동하면서 객체의 경계를 계층적으로 분할해가는 방법이다. 다해상도 모델에 의한 계층적 경계 분할은 초기화 조건에의 의존성을 극복할 수 있게할 뿐 아니라, 빠른 속도로 원하는 객체의 경계에 수렴할 수 있게 한다. 또한 지역적 리샘플링은 모델 구성요소의 정규화를 수행함으로써 객체의 오목한 부분을 성공적으로 분할할 수 있게 한다. 그리고, 제안 모델은 기존 변형모델에서 포함하는 내부 힘(internal force)과 외부 힘(external force)외에 자체교차방지 힘(non-self-intersection force)을 추가함으로서 효과적으로 모델내의 자체교차를 방지할 수 있게 하였다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.9 no.8
• /
• pp.1787-1792
• /
• 2005

The join of remote sensing and GIS(Geographic Information System) could be useful in various fields of marine information and land information as well as ITS(Intelligent Transport Systems). This paper is LPF(Low Pass Filtering) for the extraction of island detection in coastal zone Iron SPOT imagery which is 10m resolution photograph. The study area is based on the southern sea in korea. Sobel operator performed the extraction of island detection in coastal zone after the LPF processing by remote sensing. And, GIS was used to generate from raster to vector data. As the result, The best way prove out the 5${\times}$5 convolution mask about the LPF processing of island detection in coastal zone. It is judged the research which it sees with the fact that the presentation of very scientific and reasonable data will be possible from the oceanic dispute will occur from the EEZ(Exclusive Economic Zone).

• Journal of the Korean Association of Geographic Information Studies
• /
• v.27 no.1
• /
• pp.52-66
• /
• 2024

The purpose of this study is to identify the spatial system and characteristics of the urban center by deriving the boundaries of the urban center set in the urban basic plan for Busan Metropolitan City and diagnosing the role and status of the center. To this end, four indicators representing the characteristics of the center were selected through a review of previous studies, and the boundaries of the center were derived using spatial statistical techniques with strengths in geographical boundary analysis. Then, using the indicators of center characteristics and population potential functions, we diagnosed the influence and potential of each center in the spatial structure of Busan Metropolitan City. The analysis showed that the scale of the centers varies greatly, and the unutilized areas where commercial areas are not activated and the expansion areas that spread beyond commercial areas to residential and industrial areas are different for each urban center. The results of the potential measurement, which indicates the attractiveness of the center, also showed areas with strong and weak population potential. Therefore, systematic management and strategies based on the hierarchical characteristics and influence measurement results are needed to strengthen the function of urban centers. The results analyzed in this study can be used as a resource for responding to various urban planning needs and policy changes in the future, along with station area development plans and spatial innovation zones for building a sustainable urban growth system, balanced development, and strengthening the function of centers.

• 한국신재생에너지학회:학술대회논문집
• /
• 2007.06a
• /
• pp.501-503
• /
• 2007

오호츠크해 사할린 북동 해저사면지역은 세계적인 가스수화물 산출지역으로 알려져있다. 이미 2005년 탐사에서 50 cm 두께의 순수 가스수화물 시료를 해저면에서 채취한 지역이다. 2006년 탐사에서는 다양한 주파수대역의 고해상도 지구불리장비를 사용하여 탐사를 실시하였다. Side-scan Sonal와 3.5 kHz SBP 탐사, 수중음향 탐사를 통해 대규모 하도구조가 가스수화물지역의 북쪽 경계를 형성하고 있음을 밝혔다. 가스수화물의 BSR은 수심에 얕아짐에 따라 계속해서 심도가 감소하여 수심 약 300 m에서 해저면에 다다름. 이는 연구지역에서의 가스수화물 안정대의 상부경계가 약 300 m임을 시사한다 가스수화물 분출구조들은 약 1000m 수심을 경계로 천부에 분포하고, 해저면에는 원형의 가스분출구조들이 특징적으로 나타난다. 반면에 1000 m 수심보다 깊은 지역에서는 mud-dirpir의 상승구조로 판단되는 상승구조들이 해저면에 굴곡지형을 형성하고 있다. 해수중으로 분출하는 가스기둥들은 수심 111.2 m에서 1226.4 m 지점까지 다양한 수심에서 분포하며, 상승높이는 최대 750 m에 이르며, 약 150 m 수심까지 도달한다. 이는 해저에서 분출되는 메탄가스가 해수에 흡수되지 않고 해수면까지 이동하여 대기중으로 발출될 수 있음을 시사한다.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.25 no.4
• /
• pp.19-31
• /
• 2022

The definition of urban forest is described as all forest and trees except the Natural Parks throughout whole territory in Urban Forest Act. But the concept of urban forest in the law differs from general awareness by Korean citizen and from definitions of other countries. For discussing such differences of urban forest definition, it was tested how much urban forest area would be changed according to the various definition of urban area. The urban area was defined to be four scenarios in this study in consideration of "urban area" by National Land Planning and Utilization Act (NLPUA), 300m buffered boundary from the "urban area" proposed by World Health Organization (WHO) and forest watershed area. In the scenario 1, including forest watershed intersected with "urban area" by NLPUA, urban forest area was estimated at 1.83 million ha in which urban forest area per person was 386㎡. In the scenario 2, including forest watershed intersected with 300m buffered boundary from the "urban area" by NLPUA, urban forest area was estimated at 1.92 million ha in which urban forest area per person was 405㎡. In the scenario 3, including forest watershed intersected with "urban area" placed within administration boundary (Eup·Dong districts), urban forest area was estimated at 1.08 million ha in which urban forest area per person was 230㎡. In the scenario 4, including forest watershed intersected with 300m buffered boundary from "urban area" placed within administration boundary, urban forest area was estimated at 1.20 million ha in which urban forest area per person was 256㎡. Therefore, the boundary of urban area should be agreed clearly prior to defining the urban forest area for avoiding unclear area calculated according to different definitions.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2016.05a
• /
• pp.333-337
• /
• 2016

제주지역 지하수개발을 위해서는 굴착예정지역의 지하수위를 예측하고, 지하수 해석 모델을 이용하여 사용량에 따른 수위변동을 분석한다. 그러나 지하수 개발예정지역은 관측결과가 없는 미계측 지점으로 정확한 수위를 예측하기에는 한계가 있다. 일반적으로 실무에서는 분석유역 내 관측정의 관측수위와 모델에서 계산된 지점수위만을 비교한 후 부정류 해석을 실시한다. 이러한 경우 관측지점에 한하여 유사한 지하수위를 도출할 수 있지만 미계측 지역의 지하수위는 검증되지 않은 결과이기 때문에 정확한 부정류해석이 어렵다. 특히, 제주지역의 지하수흐름은 지역별 표고분포와 상이한 결과가 나타내기 때문에 실제 지하수흐름과 유사하게 묘사될 수 있도록 분석지역의 특성에 적합한 지하수 모델 분석방법이 필요하다. 본 연구에서는 지하수 해석모형을 이용하여 대정유역의 지하수흐름을 모의하고, 실무에서 적용되는 방법의 문제점을 파악하여 모델의 지하수흐름이 실제 흐름과 유사하게 묘사될 수 있도록 모델경계설정방안을 분석하였다.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.22 no.5
• /
• pp.439-444
• /
• 2009

This paper presents an efficient contact detection algorithm for the plane elastostatic contact problem of the boundary element method(BEM). The data structures of the boundary element method are dissected to develop an efficient contact detection algorithm. This algorithm is consists of three parts as global searching, local searching and contact relation setting to reflect the corner node problem. Contact master and slave type elements are used in global searching step and quad-tree is selected as the spatial decomposition method in local searching step. To set up contact relation equations, global contact searching is conducted at node level and local searching is performed at element level. To verify the efficiency of the proposed contact detection algorithm of BEM, numerical example is presented.