• TTA Journal
• /
• s.82
• /
• pp.140-146
• /
• 2002

지난해 12월 개소한 TTA 디지털방송시험센터에서는 디지털 위성방송 시험$\cdot$인증 서비스에 이어 디지털 지상파방송 시험$\cdot$인증 서비스를 위한 테스트베드를 구성할 예정이다. 현재 디지털 지상파방송은 오디오/비디오를 위주로 서비스되고 있지만 6월 월드컵 때 각 방송사들은 DASE(DTV Application Software Environment)를 이용한 데이터방송 실험 서비스를 실시한 바 있다. 이에 본 고에서는 제조업체 및 사업자의 방송장비 개발지원 및 시험 서비스를 위하여 디지털 지상파 데이터 방송까지를 고려한 디지털 지상파 시험·인증 서비스 테스트베드 환경 및 구성 등에 대하여 고찰한다.

• Journal of Satellite, Information and Communications
• /
• v.1 no.2
• /
• pp.45-50
• /
• 2006

A satellite and ground stations which are developed in a program are tested whether the interface between the satellite and ground is well established before satellite operations. These compatibility tests are performed when the satellite is connected with the ground stations after all satellite and ground stations requirements are verified. The content of the RF compatibility test is to check whether the interface requirements which are described on the Interface Control Document are well developed. During the early operation phase and tentative contingency operations of the satellite, KARI ground station uses other oversea ground stations which are located worldwide according to contract between the KARI and the contractor. Since oversea ground stations were not developed for the designated space program, system integrator should check whether the oversea ground stations are satisfied with interface requirements. Using the RF suitcase, RF interface and the content of RF communication can directly be verified during RF compatibility test on oversea ground station without KARI ground station's support. The RF compatibility test using RF suitcase was performed oversea ground stations as well as KARI ground station located on Korea. The content of RF compatibility test was standardized in order to be used at any oversea ground stations, especially fitted for the operations concept of launch and early operations phase. The test content would be RF characteristics, protocol, command loop test, telemetry loop test, and ground station interface test.

• Defense and Technology
• /
• no.4 s.278
• /
• pp.66-75
• /
• 2002

항공기의 야간임무 수행 능력을 최대화하고 조종사에게 심리적 안정감을 주어 전투력 향상을 극대화 할 수 있는 야시조명에 관한 지상시험평가 방법에 대하여 서술하였다. 야시조명 지상시험 평가는 설계된대로 야시조명원들이 정상 작동하는지를 평가하는 기능시험과 야간투시경의 원활한 작동을 위한 조명원들의 간섭현상을 평가하는 호환성시험으로 나눌 수 있다.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 1997.11a
• /
• pp.4-4
• /
• 1997

로켓 조종장치는 크게 추력방향 조종(TVC, Thrust Vector Control) 장치, 측면추력조종(Lateral Thrust Control) 장치 그리고 공기역학 조종면으로 분류할 수 있다. 조종장치의 공통된 특징은 모터가 작동하거나 유도탄이 비행할 때만 타의 효과가 발생한다는 점이다. 그러므로 조종장치를 개발하기 위해서는 이상류 초음속 유동이나 삼음속 이상의 자유유동(freestream)을 지상에서 효과적으로 모의할 수 있는 지상 시험장치가 필요하다. 이 시험장치에는 초음속 풍동과 유동 시험장치(cold-flow test stand), 그리고 6분력 트러스트 스텐드가 포함된다. 삼성항공은 우주용 추진기관의 성능을 지상에서 간단한 장치를 구현하여 시험할 수 있는 모의연소 시험장치, 노즐유동에 포함된 고체입자를 직접 수집할 수 있는 고체입자 포집장치 등 각종 시험장치를 제작하였다. 이를 바탕으로 차세대 전술유도탄의 핵심기술가운데 하나인 조종장치와 이를 효과적으로 개발하기 위한 지상 시험장치 확보에 착수하고 있다.

• Aerospace Engineering and Technology
• /
• v.9 no.1
• /
• pp.1-8
• /
• 2010

The tilt-rotor Smart UAV(Unmanned Air Vehicle) has been developed by KARI(Korea Aerospace Research Institute) for civil purposes. In order to prove the reliabilities of total system of Smart UAV, the series of ground tests were performed including system interface test, aircraft HILS(Hardware In the Loop Simulation) Test, ground power test, 4-DOF (Degrees of Freedom)rig test, and tethered hover test. Many unexpected problems occurred at each ground test. With clearing these problems, the total Smart UAV systems were matured and the airworthiness was proven enough. After complete of additional ground test proposed by FRRB(Flight Readiness Review Board), the first flight test will be performed in this year. This paper presents the procedures and the analysis results of the ground tests for the tilt-rotor Smart UAV.

• TTA Journal
• /
• s.51
• /
• pp.94-96
• /
• 1997

일본의 주요 연구소들은 디지털 지상방송 시스템의 개발을 위하여 변조방식을 중점으로 기본적인 현장시험을 공동으로 시작할 예정이다. 이 현장시험은 디지털 지상 TV방송의 조기도입을 촉진하도록 1998년까지 잠정적인 방송시스템의 설정을 목표로 진행되고 있다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.41 no.6
• /
• pp.495-501
• /
• 2013

Korean Utility Helicopter (KUH) has been designed to avoid the blade passing frequency and any instability due to a coupling of dynamic characteristics between the main rotor and the airframe in ground operation. For these design objectives, the vibration analysis and the ground resonance analysis were performed to analyze the dynamic characteristics of the airframe and the main rotor. Then, the whirl-tower test was conducted to identify the dynamic characteristics of the main rotor and the ground vibration test (GVT) was conducted to identify the dynamic characteristics of the airframe. The GVT for KUH was conducted with the test conditions and test articles established in consideration of each flight and ground condition. This paper shows the method and technique for performing the GVT for KUH and presents the correlation technique and the results for the correlated analysis model.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.40 no.9
• /
• pp.800-806
• /
• 2012

This paper proposes design and development of the Integrated Ground Support System (IGSS) for the flight test of the Unmanned Aerial Vehicle (UAV), which combines ground support and ground control. The integrated flight test of the UAV is a necessary procedure to validate the functionality of the Unmanned Aerial System (UAS). In order to execute cost-effective and systematic flight tests, the IGSS is regarded as an inevitable infrastructure of UAS for small laboratories. The proposed IGSS has functions of ground control, radio communication, power generation, transportation and the maintenance of the UAV.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2012.05a
• /
• pp.479-483
• /
• 2012

This paper describes the development status of rocket engine test facility for the performance evaluation of liquid rocket engine of KSLV-II 1st stage. Design specification and composition of rocket engine test facility are suggested based on the design requirements. The results of the basic design of rocket engine test facility will be used as base data for the detail design and construction of rocket engine ground test facility of KSLV-II 75tonf liquid rocket engine.

• Aerospace Engineering and Technology
• /
• v.13 no.2
• /
• pp.142-149
• /
• 2014

After launch of Low Earth Orbit(LEO) satellite, Initial Activation Checkout(IAC) and Calibration and Validation(Cal & Val) procedure are performed prior to enter normal operation phase. During normal operation phase, most of the time is allocated for mission operation except following up measures to anomaly and orbit maintenance. Since mission operation capability is key indicator for success of LEO satellite program and consistent with promotion purpose of LEO satellite program, reliability should be ensured by conducting through test. In order to ensure reliability by examining the role of LEO satellite and ground station during ground test phase, realistic test scenario that is similar to actual operation conditions should be created, and test that aims to verify full mission cycle should be performed by transmitting created command and receiving image and telemetry data. This paper describes the test design and result. Consideration items for test design are described in detail and result of designed test items are summarized.