• Title/Summary/Keyword: 지상반복

Search Result 166, Processing Time 0.023 seconds

Introduction and Application of 3D Terrestrial Laser Scanning for Estimating Physical Structurers of Vegetation in the Channel (하도 내 식생의 물리적 구조를 산정하기 위한 3차원 지상 레이저 스캐닝의 도입 및 활용)

  • Jang, Eun-kyung;Ahn, Myeonghui;Ji, Un
    • Ecology and Resilient Infrastructure
    • /
    • v.7 no.2
    • /
    • pp.90-96
    • /
    • 2020
  • Recently, a method that applies laser scanning (LS) that acquires vegetation information such as the vegetation habitat area and the size of vegetation in a point cloud format has been proposed. When LS is used to investigate the physical shape of vegetation, it has the advantage of more accurate and rapid information acquisition. However, to examine uncertainties that may arise during measurement or post-processing, the process of adjusting the data by the actual data is necessary. Therefore, in this study, the physical structure of stems, branches, and leaves of woody vegetation in an artificially formed river channel was manually investigated. The obtained results then compared with the information acquired using the three-dimensional terrestrial laser scanning (3D TLS) method, which repeatedly scanned the target vegetation in various directions to obtain relevant information with improved precision. The analysis demonstrated a negligible difference between the measurements for the diameters of vegetation and the length of stems; however, in the case of branch length measurement, a relatively more significant difference was observed. It is because the implementation of point cloud information limits the precise differentiation between branches and leaves in the canopy area.

Field Test and Performance Verification of On-board Oriented Train Control System (차상중심 열차제어시스템의 현장시험을 통한 성능검증)

  • Baek, Jong-Hyen
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.16 no.8
    • /
    • pp.5513-5521
    • /
    • 2015
  • There is an operational efficiency problem about wayside equipment applied to the domestic low-density branch as the equipment has been installed and operated similarly in the mainline. On-board oriented train control system, which has been developed for train safety and operation efficiency, ensures safe train operation without expensive ground control signal devices. Such system consists of on-board control system, wayside control system, and local control system. In this paper, the details of tests such as suitability test, communication test, and interface test are described by installing the on-board control system and wayside control system in field. Installation tests include checking power, voltage, cable connection, LED status, etc. Field applicability of the developed system is also verified through the dynamic operation tests with diverse scenarios, which are performed on the virtual line similar to the real environment including switch machine and level crossing gate. Dynamic operation tests were conducted for total 7 scenarios, and several tests were repeated for each scenario. The elapsed time for each operation was computed by analyzing main process log, and we could check that each operation was accomplished within several seconds. Furthermore, the developed system was verified through field test with an accredited institute, and testing certificates were issued.

Comparison of Predicted and Measured ASF (ASF 예측치와 실측치 비교)

  • Shin, Mi-Young;Hwang, Sang-Wook;Yu, Dong-Hui;Park, Chan-Sik;Lee, Chang-Bok;Lee, Sang-Jeong
    • Journal of Navigation and Port Research
    • /
    • v.34 no.3
    • /
    • pp.175-180
    • /
    • 2010
  • In the almost application parts, GNSS being used the primary navigation system on world-widely. However, some of nations attempt or deliberate to enhance current Loran system, as a backup to satellite navigation system because of the vulnerability to the disturbance signal. Loran interests in supplemental navigation system by the development and enhancement, which is called eLoran, and that consists of advancement of receiver and transmitter and of differential Loran in order to increase the accuracy of current Loran-C. A significant factor limiting the ranging accuracy of the eLoran signal is the ASF in the TOAs observed by the receiver. The ASF is mostly due to the fact that the ground-wave signal is likely to propagate over paths of varying conductivity and topography. This paper presents comparison results between the predicted ASF and the measured ASF in a southern east region of Korea. For predicting ASF, the Monteath model is used. Actual ASF is measured from the legacy Loran signal transmitted Pohang station in the GRI 9930 chain. The test results showed the repeatability of the measured ASF and the consistent characteristics between the predicted and the measured ASF values.

Qualitative Verification of the LAMP Hail Prediction Using Surface and Radar Data (지상과 레이더 자료를 이용한 LAMP 우박 예측 성능의 정성적 검증)

  • Lee, Jae-yong;Lee, Seung-Jae;Shim, Kyo-Moon
    • Korean Journal of Agricultural and Forest Meteorology
    • /
    • v.24 no.3
    • /
    • pp.179-189
    • /
    • 2022
  • Ice and water droplets rise and fall above the freezing altitude under the effects of strong updrafts and downdrafts, grow into hail, and then fall to the ground in the form of balls or irregular lumps of ice. Although such hail, which occurs in a local area within a short period of time, causes great damage to the agricultural and forestry sector, there is a paucity of domestic research toward predicting hail. The objective of this study was to introduce Land-Atmosphere Modeling Package (LAMP) hail prediction and measure its performance for 50 hail events that occurred from January 2020 to July 2021. In the study period, the frequency of occurrence was high during the spring and during afternoon hours. The average duration of hail was 15 min, and the average diameter of the hail was 1 cm. The results showed that LAMP predicted hail events with a detection rate of 70%. The hail prediction performance of LAMP deteriorated as the hail prediction time increased. The radar reflectivity of actual cases of hail indicated that the average maximum reflectivity was greater than 40 dBZ regardless of altitude. Approximately 50% of the hail events occurred when the reflectivity ranged from 30~50 dBZ. These results can be used to improve the hail prediction performance of LAMP in the future. Improved hail prediction performance through LAMP should lead to reduced economic losses caused by hail in the agricultural and forestry sector through preemptive measures such as net coverings.

Evaluation of Drought Stress in Native Kimchi Cabbage from Korea (국내 재래종 배추 유전자원의 내건성 평가)

  • Si-Hong Kim;Soo-Yong Choi;Eui-Sub Lee;Young-Hyun Woo;Jae-Yun Heo
    • Proceedings of the Plant Resources Society of Korea Conference
    • /
    • 2020.08a
    • /
    • pp.69-69
    • /
    • 2020
  • 식물체가 건조 스트레스를 받으면 각 기관 물질 생산의 변이, 분화 및 발달 억제를 통해서 식물의 생산활동을 현저히 저하시켜, 식물의 생장, 형태, 개체발생 및 대사생리에 영향을 미치는 것으로 연구되어 왔다. 최근 기후 온난화로 인해 온도가 점진적으로 상승하고 가뭄과 같은 이상기상이 빈번하게 발생함에 따라 많은 노지 작물의 농업 생산성이 약화되고 있다. 배추는 우리나라의 대표적인 식품 중 하나인 김치의 주재료로 연중 안정적인 생산과 공급이 필요시 되지만, 배추의 경우 건조 조건에서 엽육조직의 붕괴와 같은 생리장해가 발생되기 때문에 최근 발생되고 있는 이상 기후의 영향으로 안정적인 생산이 어려워지고 있는 실정이다. 하지만, 배추에서는 이상 기후에 대응이 가능한 내건성 품종의 육성을 위한 연구는 미흡한 실정이다. 따라서 본 연구에서는 내건성이 높은 배추 개발을 위한 기초소재를 찾는 것을 목적으로 농촌진흥청 유전자원센터에서 보존하고 있는 재래종 배추 30계통을 분양받아 강릉원주대학교 생명과학대학 내의 조직배양실을 이용하여 연구를 수행하였다. 배지는 Tissue Culture Square Dish(125×125×20mm)에 Agar를 녹여 40ml씩 분주하여 고체배지를 조성한 후, 건조 처리구 Polyrthylene glycol 6000(PEG) 0%(Control), 20%(Mild Stress), 30%(Severe Stress)를 설정하여 60ml씩 추가 분주하여 배양기 28℃에서 15시간 처리를 하였다. 분양받은 각 계통의 종자는 1% 차아염소산 나트륨으로 10분간 종자표면을 살균한 후, 5번 정도 멸균수로 헹군 후, 표면 살균한 재래종 종자를 고체배지 시험관에 6립씩 치상하였다. 식물체 생육은 각 처리구별 3반복으로 하였으며 주간 12시간 주기, 광도 2,400Lux, 온도 20℃의 조직배양실에서 치상 후 7일간 생육하였다. 치상 후 7일간 생육시킨 식물체를 채취하여 지상부생체중, 지하부 생체중, 뿌리 길이를 측정하였으며, 지상부와 지하부로 나누어 50℃에서 72시간 건조시킨 후, 건물 생산량을 조사하였다. 본 실험 결과 건조 처리(PEG-6000)는 배추의 생장을 저해하였지만, 생육 저해 정도는 계통간의 차이가 있는 것을 관찰할 수 있었으며 무처리구와 스트레스 처리구간의 생장량 변화 정도를 기반으로 군집분석을 수행한 결과 'IT110483'과 'IT104903' 계통이 실험에 공시된 계통들 중 상대적으로 강한 건조 내성을 가진 것을 확인할 수 있었다. 따라서, 재래종 배추 계통 중 일부는 건조내성이 강한 새로운 배추 품종을 육성하는데 있어 유용하게 이용될 수 있을 것으로 사료된다.

  • PDF

대형열진공 챔버 제어로직

  • Seo, Hee-Jun;Moon, Guee-Won;Lee, Sang-Hun;Cho, Hyok-Jin;Cho, Chang-Lae;Choi, Seok-Weon
    • Aerospace Engineering and Technology
    • /
    • v.4 no.1
    • /
    • pp.57-65
    • /
    • 2005
  • Due to the future of a large size satellite like Geo-stationary orbit satellite, KARI has progressed the construction of Large Thermal Vacuum Chamber(LTVC) with Φ8mXL10m, which simulates the orbit environment at space. The space environment can be characterized as very harsh conditions. Once the spacecraft is launched and enters its orbit, the satellite is exposed to this space environment. The continuous exposure to such space environment could cause malfunction of major parts of the spacecraft, which could lead to the failure of the entire mission. Due to the fact that space environment is completely different from that of the ground, the satellite that functioned normally on the ground could show some unexpected malfunction in space environment. For this reason, the performance of the spacecraft must be confirmed under the simulated conditions of the space environment. This document includes LTVC control logic, Interlock by which the LTVC can be controlled more safely and efficiently.

  • PDF

Comparison and Analysis of Web Accessibility for the Korea, USA, and Japan's Broadcast Web Sites (한·미·일 지상파 방송사의 웹 접근성 비교·분석)

  • Park, Seong-Je;Kim, Yung-Keun;Kim, Jong-Weon
    • Journal of Korea Society of Industrial Information Systems
    • /
    • v.19 no.4
    • /
    • pp.105-117
    • /
    • 2014
  • Acquisition of information through the broadcast media is essential for modern life and each broadcaster has progressed its service over the internet with the development of digital technology. Under this circumstance, this study presented the results which compared and analyzed the web accessibility evaluation for Korea, USA, and Japan's leading broadcaster web sites. According to the study results, there was no significant difference in the level of accessibility in all web sites of three countries, but accessibility compliance rate such as alternate text, skip-navigation of repeated region, and title was somewhat insufficient for Korean web sites. In addition, accessibility errors in the brightness contrast of the text contents, the run of the functions that a user doesn't have any intention, the clear statement of the default language, and the label provision were investigated. Therefore, Korean broadcasters should urgently improve and modify these errors and problems for effective web accessibility.

Prediction of Protein Secondary Structure Using the Weighted Combination of Homology Information of Protein Sequences (단백질 서열의 상동 관계를 가중 조합한 단백질 이차 구조 예측)

  • Chi, Sang-mun
    • Journal of the Korea Institute of Information and Communication Engineering
    • /
    • v.20 no.9
    • /
    • pp.1816-1821
    • /
    • 2016
  • Protein secondary structure is important for the study of protein evolution, structure and function of proteins which play crucial roles in most of biological processes. This paper try to effectively extract protein secondary structure information from the large protein structure database in order to predict the protein secondary structure of a query protein sequence. To find more remote homologous sequences of a query sequence in the protein database, we used PSI-BLAST which can perform gapped iterative searches and use profiles consisting of homologous protein sequences of a query protein. The secondary structures of the homologous sequences are weighed combined to the secondary structure prediction according to their relative degree of similarity to the query sequence. When homologous sequences with a neural network predictor were used, the accuracies were higher than those of current state-of-art techniques, achieving a Q3 accuracy of 92.28% and a Q8 accuracy of 88.79%.

An Intensification Plan of Technical Competitive strength in Domestic Construction Engineering Company (건설엔지니어링업체의 기술경쟁력 강화방안)

  • Park Hwan Pyo;Lee Kyo Sun;Ji Sang Wuk;Park Sang Hun
    • Korean Journal of Construction Engineering and Management
    • /
    • v.3 no.3 s.11
    • /
    • pp.66-74
    • /
    • 2002
  • The Cost of Engineering is composed of the $3{\~}5{\%}$ of total cost of construction. It is important the role of engineering in the first stage of the business. But, it was not more the technical level of domestic design stage than advanced state. Expecially, it was because of the cognition lack and unreliable results about technical development. The result of that, it was lacking to the draw results of foreign countries. And it was to waste national budget through overlapped adopting of similar technologies from abroad that few projects are performed as their original plan. Therefore, the research is proposed to the intensification plan of technical competitive strength in domestic construction engineering company to cope with the change of economic environment.

Relative Radiometric Normalization of Hyperion Hyperspectral Images Through Automatic Extraction of Pseudo-Invariant Features for Change Detection (자동 PIF 추출을 통한 Hyperion 초분광영상의 상대 방사정규화 - 변화탐지를 목적으로)

  • Kim, Dae-Sung;Kim, Yong-Il
    • Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
    • /
    • v.26 no.2
    • /
    • pp.129-137
    • /
    • 2008
  • This study focuses on the radiometric normalization, which is one of the pre-processing steps to apply the change detection technique fur hyperspectral images. The PIFs which had radiometric consistency under the time interval were automatically extracted by applying spectral angle, and used as sample pixels for linear regression of the radiometric normalization. We also dealt with the problem about the number of PIFs for linear regression with iteratively quantitative methods. The results were assessed in comparison with image regression, histogram matching, and FLAASH. In conclusion, we show that linear regression method with PIFs can carry out the efficient result for radiometric normalization.