• Journal of Korea Water Resources Association
• /
• v.40 no.12
• /
• pp.985-994
• /
• 2007

Small hydropower is the one of the cleanest one among new and renewable energy with less green house gas emissions. Recently, the necessity of developing small hydropower is emerging since its remaining potential resources in this country are abundant. However, a survey or research on the small hydropower development has been hardly performed since the 1990#s. These circumstances encourages a systematic approach for the small hydropower development. The purpose of this study is to propose a methodology of the location analysis for developing small hydropower. To this end, constraint and location criteria with weights are established and quantification method of each factor is presented. Especially, the analysis procedure is established on the basis of GSIS. Also the study focus on raising the objectivity and precision of analysis by developing system model with automatic search. The proposed methodology is applied to Bochung stream in Keum Riverbasin. The result selects the four and two locations of dam type and run-of-river type respectively. This study will be beneficial to the future activation of small hydropower development as a fundamental work.

• Journal of the Korean association of regional geographers
• /
• v.16 no.6
• /
• pp.689-705
• /
• 2010

The purpose of this study is to examine the geographical distribution and the clustering characteristics as an industrial cluster in order to provide alternative fundamental data for the preparation of the policies to facilitate the development of the Green Energy Industry. The main source of the data in this study is the outcome of a survey conducted to the firms and environment specialist from June 21st, 2010 to July 23rd, 2010. The Green Energy related companies in Daegyeong region are clustered around Pohang and Gumi, Gyeongbuk, and Dalseo District of Daegu Metropolitan City. The core element of the sustainability of the Green Energy Industry in the region is the inducement of the large-scale corporate presence in the region as well as the technical and geographical proximity. That is, the fact that there are sister companies established by the large scale corporate Daegyeong region as they have chosen this field for their new drive for growth. The major location factors are proximity, higher quality expectations from the local demands, technical availability, and competition with other companies of the same industry in the region, rather than the availability of the raw material. And the choke points for these companies are the financial support of R&D and the policy support of specialist training. The policy to facilitate the development of the industry in question in Daegyeong region, therefore, should shift from its previous focuses on infrastructure building and taxation benefits to financial supports for the technical research, human resource development in response to the needs of the companies. Also, programs to support the proficiency training for the already-hired work forces and development of new policies for the Green Energy Industry are needed to be introduced for the development of the Green Energy Industry in Daegyeong region.

• Journal of the Korean Geographical Society
• /
• v.46 no.4
• /
• pp.396-412
• /
• 2011

Multi-proxy analysis was used to produce a high-resolution paleoclimatic record from a thick section of the Holocene alluvial fan deposit in Gatap-ri, Buyeo. According to ${\delta}^{13}C$ analyses, five minor climate fluctuations can be determined. From the stage I to stage VI, climate changes are as follows: cool-dry, warm-humid, cool-dry, warm humid, drier than stage IV, and finally more humid environment than stage V. According to magnetic susceptibility records, four different stages can be identified, among which stage ii shows the highest susceptibility. Stage-i deposit is derived from sediments of back marsh-type wetland. Stage-ii and stage-iii deposits, however, show higher magnetic susceptibility because magnetite-enriched soil from weathered upland was transported to the area to form an alluvial fan deposits. Stage-iv deposit is comparable to the modern plow horizon.

• Economic and Environmental Geology
• /
• v.42 no.3
• /
• pp.273-282
• /
• 2009

To render more valuable information, a spatial database is being constructed from digitalized maps in the geographic areas. Transferring file-based maps into a spatial database, facilitates the integration of larger databases and information retrieval using database functions. Geological mapping is the graphical interpretation results of the geological phenomenon by geological surveyors, which is different from other thematic maps produced quantitatively. These features make it difficult to construct geologic databases needing geologic interpretation about various meanings. For those reasons, several organizations in the USA and Australia are suggesting the data model for the database construction. But, it is hard to adapt to a domestic environment because of the representation differences of geological phenomenon. This paper suggests the data model adaptive in domestic environment analyzing 1:50,000 scales of geologic maps and more detailed mine geologic maps. The suggested model is a logical data model for the ArcGIS GeoDatabase. Using the model it can be efficiently applicable in the 1:50,000 scales of geological maps. It is expected that the geologic data model suggested in this paper can be used for integrated use and efficient management of geologic maps.

• Archives of design research
• /
• v.19 no.4 s.66
• /
• pp.71-80
• /
• 2006

Collaboration has become essential in the product design process due to internationalized and specialized business environments. This study presents a real-time collaborative 3D design workspace for distributed designers, focusing on the development and the evaluation of new interaction techniques supporting nonverbal communication such as awareness of participants, shared manipulation and tele-presence. Requirements were identified in terms of shared objects, shared workspaces and awareness through literature reviews and an observational study. An Augmented Reality based collaborative design workspace was developed, in which two main interaction techniques, Turn-table and Virtual Shadow, were incorporated to support shared manipulation and tele-presence. Turn-table provides intuitive shared manipulation of 3D models and physical cues for awareness of remote participants. Virtual shadow supports natural and continuous awareness of location, gestures and pointing of partners. A lab-based evaluation was conducted and the results showed that interaction techniques effectively supported awareness of general pointing and facilitated discussion in 3D model reviews. The workspace and the interaction techniques can facilitate more natural communication and increase the efficiency of collaboration on virtual 3D models between distributed participants (designer-designer, engineer, or modeler) in collaborative design environments.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.25 no.5
• /
• pp.393-398
• /
• 2007

According to the Korean datum change to a world geodetic system, the EDM area should be readjusted to provide consistent product over the country. The data set for EDM area is extracted from the previous KTN1987 DB and checked for the moved markers in XY network adjustment which provides quality verification. Then, EDM data set for the seven areas are rebuilt for the adjustment. Since the data is still based on the old datum, the coordinates of the data are transformed by applying the coordinate transformation parameters. Here, the transformation parameters, which were determined for the conversion of 1:50,000 topographic maps by NGII, were used. For each EDM point, the geoidal height from EGM96 model is applied to obtain the ellipsoidal height based on the GRS80. The measured distance projected onto GRS80 is adjusted using BL network adjustment by fixing 2nd order or 3rd order GPS control points. The results from the readjustment show the minimum standard error of 1.37" and the maximum standard error of 2.13". Considering the measurement accuracy of EDM (1.6" corresponding to about 2cm) and GPS position for fixed points (2cm), this result is considered to be reasonable and it is good for the practical use.

• Parasites, Hosts and Diseases
• /
• v.35 no.3
• /
• pp.155-164
• /
• 1997

Studies were conducted from May, 1993 to April, 1995 to determine the changing patterns of infection Ity the liver fluke, Clonorchis sinensis, among residents and fish hosts in Kyongbuk Province. The infection rate among residents was 7.7% by stool examination. The rate in males (11.3%) was significantly higher than females (4.1%) Positive rate of intradermal test was 27.6% in the same population. The special type of a simple catalytic model was applied for the analysis of intradermal positive reactors by age arid sex, ann the equation was Y= 0.4776 t (1 -e-0.0375t) for mates ann, y : 0.2085 (1-e-0.0138t) for females. Analysis of stool examination data by two-stage catalytic model revealed y : 0.025 (e-0.0047t _ e-0.0235t). The annual Clonorchis infection rate was 4.7 per 1,000 susceptibles and the annual loss rate was 23.5 per 1,000 infected. The frequency distribution by the eggs per gram (EPG) was calculated as well as the cumulative percentages of positives. The regression equations were y : 0.929+ 1.506 log x for males and, y : 0.473 + 1.767 log x for females. Of the 25 fish species, 7 species were infected with Clonorchis mrtacercariae. Infection rates varied by the species, and ranged from 2.8% in Punfun,Bia herzi to 30.0% in Pseudorasbora panic. Average number of the matacercariae per gram of flesh was 58.1 in p. pnnpa, followed by 10.2 in Gncthopogon atromoculntus, 7.0 in Saurosobio dobryj, and 3.0 in Pcrccheilogncthus rhonlben. The present study indicates that clonorchiasis in Kyongbuk Province is less prevalent than that of several decades ago.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2007.05a
• /
• pp.1614-1618
• /
• 2007

분포형 수문모형은 유역을 격자단위로 세분화하여 매개변수를 부여하고, 증발산, 침투, 지표면유출, 중간유출, 지하수유출, 하도흐름 등 여러 가지 수문요소를 해석하는 종합적인 수문모형이다. 지표면에 내린 강우의 증발 및 침투, 유출은 토양수분의 함량에 크게 의존하게 된다. 따라서 토양수분에 대한 적절한 모의가 분포형 수문모형의 정확도를 좌우하는 핵심이라 할 수 있다. 토양수분은 식물의 생장 및 가용수자원 산정 등에 있어서 중요한 요소로서 토양층 상부의 수 미터 내에 존재하는 수분의 양을 일컫는다. 토양수분의 공간적 시간적 특성들은 증발, 침투, 지하수 재충전, 토양침식, 식생분포 등을 지배하는 매우 중요한 요소라 할 수 있다. 강우로 인한 지면과 지표하에서의 순간적인 포화공간의 형성 및 유출의 생성을 포함하는 과정과 증발산 등은 모두 비포화대(vadose zone) 혹은 토양층에서의 토양수분의 함량에 크게 의존하게 된다(이가영 등, 2005) 본 연구에서는 토양수분에 대한 정밀측정 자료가 있는 설마천 유역 범륜사 사면에 대하여 분포형 수문모형의 토양수분 해석 능력을 평가하고자 하였다. 토양수분 모의에 사용된 격자기반의 분포형 수문모형은 미공병단에서 개발한 GSSHA(USACE, 2006) 모형이다. 모형의 입력자료는 정밀토양도와 현장측정에 의한 토양매개변수를 반영하여 구축하였고, 강우 및 기상자료는 2003년 1월 1일 ${\sim}$ 2004년 12월 31일의 1시간 자료를 이용하였다. 모의기간 중 2003년은 초기 토양수분값 등 초기조건의 영향을 줄이기 위한 웜업 (Warm-up)기간으로 설정하였고, 2004년의 모의결과를 토양수분 관측값과 비교하였다.업지역, 상업지역 등과 같이 지형적 특성에 따른 유량측정망을 구축하는 것이다.의 의사결정 지원 도구가 될 것이다. 따라서, 본 연구에서는 도시유역의 물순환 해석을 위한 일련의 과정, 즉 자료의 조사 및 취득에서부터 물순환 해석 모형을 이용한 정량적 현황파악, 물순환 개선 기법 및 평가를 수행함에 있어 주요 착안점 및 실무에서의 기술적 가이드를 제공하고자 하였으며, 보다 세밀한 도시유역의 물순환 해석을 위하여 우리나라와 일본에서 적용이 활발한 물리적 기반의 분포형 모형(WEP, SHER, SWMM)의 적용사례를 통하여 국내 도시하천의 물순환 해석에 활용함에 있어서의 실질적인 적용절차 등을 제시하고자 하였다. 한다.호강유역의 급격한 수질개선을 알 수 있다.世宗實錄) $\ulcorner$지리지$\lrcorner$(地理志)와 동년대에 동일한 목적으로 찬술되었음을 알 수 있다. $\ulcorner$경상도실록지리지$\lrcorner$(慶尙道實錄地理志)에는 $\ulcorner$세종실록$\lrcorner$(世宗實錄) $\ulcorner$지리지$\lrcorner$(地理志)와의 비교를 해보면 상 중 하품의 통합 9개소가 삭제되어 있고, $\ulcorner$동국여지승람$\lrcorner$(東國與地勝覽) 에서는 자기소와 도기소의 위치가 완전히 삭제되어 있다. 이러한 현상은 첫째, 15세기 중엽 경제적 태평과 함께 백자의 수요 생산이 증가하자 군신의 변별(辨別)과 사치를 이유로 강력하게 규제하여 백자의 확대와 발전에

• Proceedings of the Korea Water Resources Association Conference
• /
• 2007.05a
• /
• pp.1076-1080
• /
• 2007

최근 국내에서는 하천변 생태계를 대상으로 생태구조 및 서식처 평가 등 많은 연구가 진행되었음에도 불구하고 생태적 변화를 예측하고 예측된 결과에 따라 생태복원 대책을 수립할 수 있는 연구는 현재까지 미흡하다고 볼 수 있으며, 이는 생태복원 연구에 있어 주요과제라고 할 수 있다. 이에 반해 유럽과 미국에서는 수문학적 서식처 조건에 따른 식생 반응 예측 등 수문생태 모형에 대한 연구가 꾸준히 이루어져 왔으며, 최근에는 습지, 홍수터 등을 대상으로 생태보전 복원분야에 널리 응용되고 있다. 본 연구에서는 국외의 수문생태모형 적용사례를 분석하여 국내 적용가능성 및 문제점에 대한 타당성을 제시하고자 하였다. 그 대상으로는 유역 내에 홍수량 분담을 위한 천변저류지를 적용하였으며, 의미상으로 홍수터(범람원), 습지 역시 해당 범위에 포함할 수 있다. 천변저류지는 홍수기와 비홍수기에 따라 활용 측면을 구분할 수 있으며, 이런 맥락에서 천변저류지의 수위변화는 식생 변화의 중요한 요소(factor)가 될 수 있다. 그 외 범람시기, 범람일수, 건조기간 등을 포함한 수문요소 역시 수문생태 모델의 예측 변수인 식생 성장에 영향을 미치게 된다. 이러한 수문/생태시스템의 상호관계를 활용하고 모형의 형태를 국내 식생에 대한 생리학적 특성에 맞게 변화시킬 수 있다면 국내 천변저류지에도 충분히 적용 가능할 것으로 판단된다. 또한 잠재적으로 식생 성장에 영향을 줄 수 있는 다양한 환경조건 예를 들면 영양물질, 토양구조, 토사 퇴적 등을 적용대상지 환경에 맞게 포함하거나 고려할 수 있다면 모형의 재현성을 더욱 높일 수 있을 것이다.의 기대효과를 가져올 수 있으리라 생각되며 분석된 인자들은 수달 서식지를 위한 하천정비의 기초자료에 유용할 것으로 보인다.따른 유량측정망을 구축하는 것이다.의 의사결정 지원 도구가 될 것이다. 따라서, 본 연구에서는 도시유역의 물순환 해석을 위한 일련의 과정, 즉 자료의 조사 및 취득에서부터 물순환 해석 모형을 이용한 정량적 현황파악, 물순환 개선 기법 및 평가를 수행함에 있어 주요 착안점 및 실무에서의 기술적 가이드를 제공하고자 하였으며, 보다 세밀한 도시유역의 물순환 해석을 위하여 우리나라와 일본에서 적용이 활발한 물리적 기반의 분포형 모형(WEP, SHER, SWMM)의 적용사례를 통하여 국내 도시하천의 물순환 해석에 활용함에 있어서의 실질적인 적용절차 등을 제시하고자 하였다. 한다.호강유역의 급격한 수질개선을 알 수 있다.世宗實錄) $\ulcorner$지리지$\lrcorner$(地理志)와 동년대에 동일한 목적으로 찬술되었음을 알 수 있다. $\ulcorner$경상도실록지리지$\lrcorner$(慶尙道實錄地理志)에는 $\ulcorner$세종실록$\lrcorner$(世宗實錄) $\ulcorner$지리지$\lrcorner$(地理志)와의 비교를 해보면 상 중 하품의 통합 9개소가 삭제되어 있고, $\ulcorner$동국여지승람$\lrcorner$(東國與地勝覽) 에서는 자기소와 도기소의 위치가 완전히 삭제되어 있다.

• Journal of the Korean association of regional geographers
• /
• v.2 no.2
• /
• pp.197-204
• /
• 1996

We attempt to classifing method of micro-landform on the alluvial plain, such as natural-levee, backmarsh and alluvial fan, using false color composite of Landsat Thematic Mapper image. The study area is Kumho River Basin on the southeastern part of Korea peninsula. The most effective image for micro-landform classification is the false color composite of band 2, 3 and 4 with blue, green and red filtering. The most favorable time is the middle third of November, because of the density differentiation of green vegetation in most great. In this time the paddy field on the back-marsh is bare by rice harvesting. But on the natural levee the green vegetation, such as vegetables and lower herbs under fruit tree, remain relatively more. On the alluvial fan, the green vegetation condition is medium. For the verification of the micro-landform classification, we employed the field survey and grain size analysis of the deposition of each micro-landform on the sample area. It is clarified that the classification method of micro-landform on the alluvial plain using the Landsat TM image is relatively useful.