• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.35 no.4
• /
• pp.1-13
• /
• 2017

This thesis aims to research the original landscape of an area in Chirwon by comparing and interpreting the current and the former landscape of the time around 1860, in which was created. Inside the painting, MuGi-YeonDang(舞沂蓮塘), its nearby garden facilities and landscape are described. The conclusions of the research are as follows. Around the inner garden(內園) called Gukdam(菊潭), core spaces of Mugi-YeonDang were Hahwanjeong(何換亭) and Pungyongnu(風浴樓). After 1971, Chunghyosa(忠孝祠), Yeongjeonggak(影幀閣) which was built as inheritance of Giyangseowon (沂陽書院), and other buildings were added. On the opposite of Hahwanjeong, there is a designed pond inside Gukdam, in which three pieces of bizarre stones and colorful flower plants and trees reside. In the middle of the pond, there is an center island(中島), constructed with Bonghwangseok(鳳凰石) and Napduseok(衲頭石). Two different kinds of trees are settled on top of the stones, and one of them is identified as a maple. In the external scenery(外境), Jakdaesan Mountain and Cheonjusan Mountain are located at the upper part of Mugi-Yeondang, and Bibo Forest(裨補林), which does not exist anymore, was located at the lower part of it. A notable achievement in own research was to discover the Ju family's graveyard(朱氏墓群) consisted of more than 10 murals at the lower part of Mt. Jakdaesan in the outer space and the remains of 'Byeoreop(別業) Yuhoejeong(有懷亭)' at the nearby Sanjeong-ri(山亭里) area, which was the Ju family's gravesite(Seonsan, 先山). The discovered remains showed the presence of a square pond(方塘) and an island in the center of it(中島) in the form of Seokgasan(an artificial mountain made with stones), a stone monument called Mangchudae(望楸臺), etc. The Seokgasan was consisted of processed natural stones, and layers of the stones were piled up for it. On the side of the layered stones, 'Gyeongam(敬嵒)' and 'Sesim(洗心)' are engraved. Especially, Gyeongja(letter Gyeong, 敬字) is a copy of the Gyeongja Rock(敬字岩) of Sosu-Seowon(紹修書院), which is a symbolic garden language mutually used in the signboards of Pungyongnu and Musansa(武山祠), a place built to enshrine Ju, Sebung(周世鵬). Through the written names of the building found in , it can be assumed that the name of the square pond with Seokgasan was Taehwaji or Jeongwudang, and the name of the Seokgasan was Sogeumgang(小金剛) or Sobangjang(小方丈). The names correspond to the names of the Seokgasan of Gukdam, which was Yangsimdae(養心臺) and Bongnaesan(蓬萊山). By means of the corresponding names, it can be inferred that the relations between the spaces were intended. was originally created as 'a manor painting(莊園圖)', led by the 15th generation of the Ju family who moved into Chirwon-ri, Haman. The painting describes not only the back garden but also the external scenery, thus it provides important evidences for understanding Mugi-YeonDang and its nearby landscape, and is helpful to its maintenance and restoration.

• Journal of Korean Society of Forest Science
• /
• v.34 no.1
• /
• pp.21-30
• /
• 1977

Japanese larch (Larix leptolepis) is one of main timber species in Korea that could find much plantation and growing stands on all over the country. It is thought to be in meaningful that a guiding diagram for density control of Japanese larch stands is made to estimate easily the density conditions in the quantitaive, ecological and economic viewpoint. Sample plots for this study are selected from the stands that have not been thinned in recent years, and mean height, mean diameter, dominant height, tree numbers per hectare and stem volume of mean tree are calculated from the each sample plots among total 165 plots In this study, especially, the theory of slenderness of mean tree are applied, that have been identified through the results of the spacing trial. Relative growth characteristics of this species are calculated from the general logistic curve and its formula is $Y=ax^b$. Relatwion between the measured items are found out as follows: 1. Relation between the mean height and tree numbers per hectare by slender class is showing the high correlation as table 1 and fig. 2, and between mean diameter and tree numbers per hectare is also high correlation as table 1 and fig 3. 2. The stem volume can be correctly estimated from height in case that slender class may be known, as showing in table 3 and fig. 4. 3. The stem volume can be more correctly estimated from the relation with $D^2H$ as formula, $Log_e\;V=0.9569\;Log_eD^2H-9.8431$, and relation between stem volume of single tree or volume per hectare and tree numbers per hectare are as following formulas: $Log_e$ stem volume=9.5026-1.6800 $Log_e$ tree numbers per hectare $Log_e$ stem volume per hectare=9.4911-0.6784 $Log_e$ tree numbers per hectare. Stem volume of mean tree, tree numbers per hectare and stem volume per hectare correspond to the mean tree height are calculated to slender class as table 5, 6, 7. Through the above steps, the diagram for density control of Japanese larch are produced as fig. 9. It is thought that this diagram could be applied to control the density of Japanese larch stands.

• Journal of Korean Society of Forest Science
• /
• v.6 no.1
• /
• pp.27-31
• /
• 1967

The bamboo is a plant whose culm grows straight up. This growing characteristics has been widely utilized in industry and craft. But the developments of handcraft making and horticultural techniques in recent years become to demand the bent bamboo culms. This study has been conducted at the experimental grove located at Hyunnae Ri, Okkye Myun, Myungju Gun, Kangwon Do since 1960. Although it has been known that the secret for which bamboo shoots complet growth within 40 odd days lies in their rhizomes, this writer felt the bamboo culm sheath might be another factor in addition. Hence some were stripped of sheath in this bending study as the following: 1. Time of sheath stripping. 2. Direction of sheath stripped for arbitrary bending. 3. Accuracy of bending following the size (growth) of bamboo shoots. The following results were obtained: 1. Bamboo shoots begin to appear in April. But the bamboo shot up in June showed the best bending result with 68% of bending efficiency. 2. Bending of the culm was facilitated by stripping off the sheath located on the side of the direction toward which bending was desired. By doing this, the culm could be bent as much as 90 degrees. But the culm totally stripped of sheath could be bent in any direction. 3. In order to determine the accuracy of bending of bamboo shoots growing, sheath were stripped off the shoots of which height ranged from 10 centimeter to 150 centimeters. The shoots with height of 110 centimeters showed the best result with 90%.

• Journal of Korean Home Economics Education Association
• /
• v.30 no.3
• /
• pp.43-66
• /
• 2018

The purpose of this study was to conduct the instruction for 'Family Life Planning' based on backward design and measured the learners' understanding and satisfaction for testing validity. In short, the result of this study are as follows: In this study, first of all, the students could explain significant concepts, knowledge, and principles for the planning of family life; they could interpret and apply them; they have perspectives on them; they could empathize them; and they could have self-knowledge. The students could also accomplish high achievements for important concepts related to the field of family life planning. In conclusion, this study showed that the developed instruction was very effective for the students to achieve fruitful results, accelerating the learners' persistent understanding. Second, the learners had high satisfaction on the instruction of Family Life Planning based on backward design with the average score of 3.68 out of the perfect score 4. The students could be satisfied with the developed instruction since they could have high interest in the class thanks to diverse learning materials, and they could take an active part in the learning tasks based on group activities and questions. Also they could apply the contents that they learned through task performances to new situation and context. Therefore, this study proved that the developed instruction enhanced the learners' satisfaction on class.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.3
• /
• pp.46-55
• /
• 2016

This work proposes a 13b 100MS/s 45nm CMOS ADC with a high dynamic performance for IF-domain high-speed signal processing systems based on a four-step pipeline architecture to optimize operating specifications. The SHA employs a wideband high-speed sampling network properly to process high-frequency input signals exceeding a sampling frequency. The SHA and MDACs adopt a two-stage amplifier with a gain-boosting technique to obtain the required high DC gain and the wide signal-swing range, while the amplifier and bias circuits use the same unit-size devices repeatedly to minimize device mismatch. Furthermore, a separate analog power supply voltage for on-chip current and voltage references minimizes performance degradation caused by the undesired noise and interference from adjacent functional blocks during high-speed operation. The proposed ADC occupies an active die area of $0.70mm^2$, based on various process-insensitive layout techniques to minimize the physical process imperfection effects. The prototype ADC in a 45nm CMOS demonstrates a measured DNL and INL within 0.77LSB and 1.57LSB, with a maximum SNDR and SFDR of 64.2dB and 78.4dB at 100MS/s, respectively. The ADC is implemented with long-channel devices rather than minimum channel-length devices available in this CMOS technology to process a wide input range of $2.0V_{PP}$ for the required system and to obtain a high dynamic performance at IF-domain input signal bands. The ADC consumes 425.0mW with a single analog voltage of 2.5V and two digital voltages of 2.5V and 1.1V.

• Journal of the Korean Society of Radiology
• /
• v.15 no.5
• /
• pp.741-748
• /
• 2021

In this study, we evaluated image quality by changing collimator length and detector thickness using the Geant4 Application for Tomographic Emission (GATE) simulation tool. The gamma camera based on the Cadimium Zinc Telluride (CZT) and NaI detectors is modeled. In addition the images were acquired by setting 1, 2, 3, 4, 5, and 6 cm collimator length and 1, 3, 5, and 7 mm detector thickness using point source and phantom, which is designed by each diameter (4.45, 3.80, 3.15, 2.55 mm) with 447, 382, 317, and 256 Bq. The sensitivity (cps/MBq) for point source, and signal to noise ratio (SNR) and profile for phantom at the 4.45 mm by drwan the region of interests were used for quantitative analysis. Based on the results, the sensitivity according to collimator length is 2.3 ~ 48.6 cps/MBq for CZT detector, and 1.8 ~ 43.9 cps/MBq for NaI detector. The SNR using phantom is 3.6~9.8 for CZT detector, and 2.9~9.5 for NaI detector. As the collimator length is increased, the image resolution is also improved according to profile results based on the CZT and NaI detector. In addition, the senistivity for detector thickness is 0.04 ~ 0.12 cps/MBq for CZT detector, and 0.03 ~ 0.11 cps/MBq. The SNR using phnatom is 7.3~9.8 count for CZT detector, and 5.9~9.5 for NaI detector. As the detector thickness is increased, the image resolution is decreased according to profile results based on the CZT and NaI detector due to scatter ray. In conclusion, we need to set the geometric material such as detector and collimator to acuquire suitable image quality in nuclear medicine.

• Korean Journal of Heritage: History & Science
• /
• v.51 no.3
• /
• pp.72-87
• /
• 2018

This study highlights a drainage gate and a ditch, which existed around the whole area of the western shore of Wolji Pond(月池) and focuses on a possible connection between the drainage facility on the western shore and the historical drainage system of Wolji Pond. Specifically, it primarily considered locations and the form of a drainage gate, the relationship between northwestern ditch of Wolji Pond and the drainage gate, and the establishment period and the character of the drainage facility on the western shore. The drainage gate found in excavation in 1975 is determined as the same facility as Surakgu(水落口) recorded on an actual measurement drawing, 1922. Therefore, it is highly probable that there were already the drainage facility in the western shore of Wolji Pond before the 1920s. The drainage gate constructed by processing rectangular stones has four drainage holes for controlling water level. The way of the drainage through the drainage holes is the same as that of the northern shore of Wolji Pond. From a cadastral map drawn in 1913, it is found that the ditch existed in northwest of Wolji Pond. The ditch was proximate to the drainage gate and shared the same axes. Hence, the ditch and the drainage gate are determined as a organic facility connected to the drainage system of Wolji Pond. In particular, the ditch existed in northwest of Wolji Pond is the basis for judging that the drainage facility in the western shore were established before the 1910s. Water flowed in through drainage holes of the drainage gate is drained into the northwest of Wolji Pond, through the ditch. The establishment period and the intention of the drainage facility on the western shore can be interpreted in two aspects. First, they might be 'a agricultural irrigation facility in the Joseon era', given that Wolji Pond was recorded as a agricultural reservoir, and that the whole northwestern area of Wolji Pond was used as farm land areas. Second, they might be 'a drainage facility for controlling the water level in creating Wolji Pond', given that the drainage gate was annexed to the lower shore forming the waterline of Wolji Pond, and that the hight of drainage holes on top of the drainage gate was similar to the full water level of Wolji Pond. Considering the related grounds and circumstance, the latter possibility is high.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.8
• /
• pp.618-626
• /
• 2019

Stem cell therapy is not expected to bestow any therapeutic benefit because of the low engraftment rates after transplantation.Various cell-carrying scaffolds have been developed in order to overcome this problem. When the scaffold is formed by 3-dimensional (3D) printing, it is possible to create various shapes of scaffolds for specific regions of injury. At the same time, scaffolds provide stem cells as therapeutic-agents and mechanically support an injured region. PCL is not only cost effective, but it is also a widely used material for 3D printing. Therefore, rapid and economical technology development can be achieved when PCL is printed and used as a cell carrier. Yet PCL materials do not perform well as cell carriers, and only a few cells survive on the PCL surface. In this study, we tried to determine the conditions that maximize the cell-loading capacity on the PCL surface to overcome this issue. By applying a plasma treated condition and then collagen coating known to improve the cell loading capacity, it was confirmed that the 3% collagen coating after plasma treatment showed the best cell engraftment capacity during 72 hours after cell loading. By applying the spheroid cell culture method and scaffold structure change, which can affect the cell loading ability, the spheroid cell culture methods vastly improved cell engraftment, and the scaffold structure did not affect the cell engraftment properties. We will conduct further experiments using PCL material as a cell carrier and as based the excellent results of this study.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.35 no.2
• /
• pp.72-80
• /
• 2019

Purpose: The purpose of this study is to compare and analyze the shear bond strength and fracture pattern in different enamel tooth surface treatments for resin splinting materials. Materials and Methods: G-FIX and LightFix were used as tooth splinting materials. Twenty bovine mandibular incisors were used for the preparation of the specimens. The exposed enamel surface was separated into four parts. Each tooth was treated with 37% phosphoric acid, 37% phosphoric acid + adhesive resin, 37% phosphoric acid + G-premio bond, and G-premio bond for each fraction. Shear bond strength was measured using a universal testing machine. After measuring the shear bond strength, the fractured surface of the specimen was magnified with a microscope to observe the fracture pattern. Two-way ANOVA was used to verify the interaction between the material and the surface treatment method. One-way ANOVA was used for comparison between the surface treatment methods of each material and post-hoc test was conducted with Scheffe's test. An independent t-test was conducted to compare shear bond strengths between materials in each surface treatment method. All statistics were conducted at 95% significance level. Results: G-FIX, a tooth splinting resin, showed similar shear bonding strength when additional adhesive resins were used when material was applied after only acid etching, and LightFix showed the highest shear bonding strength when additional adhesive resins were used after the acid etching. In addition, both G-FIX and LightFix showed the lowest shear bond strength when only self-etching adhesive was applied without additional acid etching. Verification of interactions observed interconnection between resins and surface treatment methods. Most of the mixed failure was observed in all counties. Conclusion: When using G-FIX and LightFix, which are tooth-splinting materials, it is considered that sufficient adhesion will be achieved even after applying only acid etching as instructed by the manufacturer.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.37 no.2
• /
• pp.20-29
• /
• 2019

The purpose of this study is to verify and reconstruct the record information for big old trees of Jeju on the basis of the precise map of Jeju island in 1918 which was produced 100 years ago. For the analysis of high altitude, coordinate system and georeferencing were performed by selecting representative points using ArcGIS. We extracted digitized information by using point extraction method and extracted attribute information based on legend type and relative size in map. Based on the map of the past 100 years ago, the present situation of the big old tree in Jeju was analyzed and their characteristics were analyzed. In addition, based on the information of the protected big old trees in present, we discussed the characteristics of past tree (1918), present tree (2019), and contribution of big old tree in Jeju landscape and vegetation. As a result, 1,013 individuals were distributed in Jeju Island 100 years ago. Even when it was intensive in the use of timber, the big old trees were protected, and contributed as a representative component of Jeju's unique landscape. The remaining distribution of Jeju's big old tree is 159 trees. As in the past, distribution has been confirmed around the lowlands, but declines in numbers are found throughout the island. The major factors for the decline of individuals are large-scale development projects such as reaching the limit of life, natural disturbance (typhoon, disease, pest, drought, etc.). However, it is presumed that a large number of individuals have played a leading role in shaping the current forests as contributing to important species sources in the restoration process of Jeju vegetation. However, it is presumed that a large number of individuals (405) have played a leading role in forming the present forest by contributing to the species pool in the restoration process of Jeju vegetation.