• 한국지구물리탐사학회:학술대회논문집
• /
• 2005.09a
• /
• pp.83-92
• /
• 2005

Fluid conductivity logging has been applied in the boreholes to identify the permeable fi:actures and estimate the origin of saline groundwater in coast area. Fluid replacement technique measures the fluid electrical conductivity with depth at different times in a well after the borehole is first washed out with different water by passing a tube to the borehole bottom. Then formation water flows into the borehole through aquifer such as permeable fractures or porous formation during ambient or pumping condition. Measured conductivity profiles with times therefore indicate the locations of permeable zone or fractures within the open hole or the fully slotted casing hole. As a result of fluid conductivity logging for three boreholes in the study area, it is interpreted that saline groundwater is caused by seawater intrusion through fractured rock, although the effect by land reclamation partially remains. We are planning the quantitative analysis to estimate the hydraulic characteristics using fluid replacement technique, and this approach might be usefully utilized for assessing the characteristics of seawater intrusion, the design of optimal pumping, and estimating the hydraulic properties in coastal aquifer.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2005.05a
• /
• pp.123-127
• /
• 2005

Surface refraction and crosswell seismic survey conducted as a part of geoscientific studies applied in an area of ground water reservoir shows that, 1) the average velocity with respect to depth is about 250 m/s for the surface layer (<4m), 2,500 m/s for the weathered formation, and greater than 3,500 m/s for the bed rocks, 2) the depth to the bedrock derived from the seismic studies and the sonic log (17m) is somewhat different from the depth obtained from the core study (25m).

• 한국지구물리탐사학회:학술대회논문집
• /
• 1999.08a
• /
• pp.202-216
• /
• 1999

The deep foundation is frequently used for the infrastructures. Since the quality control of the cast-in-place concrete foundations such as CIP piles and slurry walls is not so easy as that of the ready made PC(prestressed concrete) piles, it is necessary to get the information on the integrity of the concrete of the foundation. The depth estimation of foundations whose depths are unknown is also very important in repair and reinforcement works or in safety inspection and assessment to the big structures. The cross-hole sonic logging(CSL) system and the single channel reflection seismic measurement system were developed to test the integrity of pile. The former is well applied to CIP structures, while the later to all kinds of piles with less accurate result compared to that of CSL. To estimate the depth of the deep foundations, parallel seismics, borehole RADAR, and borehole magnetics can be used.

• Geophysics and Geophysical Exploration
• /
• v.18 no.3
• /
• pp.154-161
• /
• 2015

For efficiently designing neutron induced gamma spectroscopy sonde, Monte Carlo simulation is employed to understand a dominant location of thermal neutron and classify the formation elements from the energy peak of capture gamma spectrum. A pulsed neutron generator emitting 14 MeV neutron particles was used as a source, and flux of thermal neutron was calculated from the twelve detectors arranged at each 10 cm intervals from the source. Design for reducing borehole effects using shielding materials was also applied to numerical sonde model. Moreover, principal elements and quantities of numerical earth models were verified through the energy spectrum analysis of capture gamma detected from a gamma detector. These results can help to enhance the signal-to-noise ratio, and determine an optimal placement of capture gamma detectors of neutron induced gamma spectroscopy sonde.

• Geophysics and Geophysical Exploration
• /
• v.7 no.2
• /
• pp.105-108
• /
• 2004

Immersive virtual reality has been used in areas of oil and gas exploration for visualization and analysis of various spatial data, such as wireline logs, 3-dimensional seismic data volume, formational boundaries, fault, and some other reservoir characteristics. Although virtual reality is a valuable tool in this area, in most cases, it requires a large budget. This paper describes the construction of a single screen, passive stereo, virtual reality, display system based on commodity, or otherwise, low-cost components. The core elements of the system are a PC with a two-channel 3-D graphics, two projects, and a polarized stereo. There are many options available for the major elements of such a system, and the basic system can be modified or adapted to many different styles of use.

• Journal of the Korean earth science society
• /
• v.23 no.6
• /
• pp.507-513
• /
• 2002

To delineate the relationship between dynamic elastic modulus and lithologies, suspension PS logging was applied to Yuseong granite, Paldang banded gneiss, and Sabuk sedimentary rock. P and S wave velocities were also measured for these lithologies. In addition, uniaxial strength and Poisson’s ratio were measured in a laboratory for Yuseong granite and Paldang banded gneiss. In laboratory measurements, P and S wave velocities in Paldang banded gneiss were higher than those in Yuseong granite whereas Poisson’s ratio in Paldang banded gneiss was lower than that in Yuseong granite. This implies that P and S wave velocities correlate reversely with Poisson’s ratio. The dynamic Young modulus obtained from suspension PS logging was high compared to the dynamic bulk modulus and the dynamic shear modulus.

• Journal of the Korean Geophysical Society
• /
• v.4 no.2
• /
• pp.113-120
• /
• 2001

The discrete wavelet transform(DWT) has potential as a tool for supplying discriminatory attributes with which to distinguish seismic events. The wavelet transform has the great advantage over the Fourier transform in being able to localize changes. In this study, a discrete wavelet transform is applied to seismic traces for identifying seismic events and picking of arrival times for first breaks and S-wave arrivals. The precise determination of arrival times can greatly improve the quality of a number of geophysical studies, such as velocity analysis, refraction seismic survey, seismic tomography, down-hole and cross-hole survey, and sonic logging, etc. provide precise determination of seismic velocities. Tests for picking of P- and S- wave arrival times with the wavelet transform method is conducted with synthetic seismic traces which have or do not have noises. The results show that this picking algorithm can be successfully applied to noisy traces. The first arrival can be precisely determined with the field data, too.

• Geophysics and Geophysical Exploration
• /
• v.25 no.4
• /
• pp.167-176
• /
• 2022

We designed a borehole deviation survey tool applicable for steel-cased holes, K-DEV, and developed a prototype for a depth of 500 m aiming to development of own equipment required to secure deep subsurface characterization technologies. K-DEV is equipped with sensors that provide digital output with verified high performance; moreover, it is also compatible with logging winch systems used in Korea. The K-DEV prototype has a nonmagnetic stainless steel housing with an outer diameter of 48.3 mm, which has been tested in the laboratory for water resistance up to 20 MPa and for durability by running into a 1-km deep borehole. We confirmed the operational stability and data repeatability of the prototype by constantly logging up and down to the depth of 600 m. A high-precision micro-electro-mechanical system (MEMS) gyroscope was used for the K-DEV prototype as the gyro sensor, which is crucial for azimuth determination in cased holes. Additionally, we devised an accurate trajectory survey algorithm by employing Unscented Kalman filtering and data fusion for optimization. The borehole test with K-DEV and a commercial logging tool produced sufficiently similar results. Furthermore, the issue of error accumulation due to drift over time of the MEMS gyro was successfully overcome by compensating with stationary measurements for the same attitude at the wellhead before and after logging, as demonstrated by the nearly identical result to the open hole. We believe that the methodology of K-DEV development and operational stability, as well as the data reliability of the prototype, were confirmed through these test applications.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2008.10a
• /
• pp.173-178
• /
• 2008

In this paper, we will introduce rock physics modeling technique, which interrelate reservoir properties with seismic properties, and apply the technique to the Donghae-1 gas reservoir. From well-log data analysis, we obtained velocityporosity (Vp-$\phi$) relations for each formation. These relations can used to predict porosity from seismic data. In addition, we analyzed permeability data, which were obtained from core measurements and computational rock physics simulations. We then obtained permeability-porosity ($\kappa-\phi$) relations. Combining $\kappa-\phi$ with Vp-$\phi$ relations, we finally present quantitative Vp-$\kappa$ relations. As to Vp-$\phi$ modeling, we found that the degree of diagenesis and clay contents increase with depth. As to Vp-$\kappa$ relations, though \kappa-\phi relations are almost identical for all formations, we could obtain distinct Vp-$\kappa$ relations due to Vp-$\phi$ variations. In conclusion, the rock physics modeling, which bridges between seismic properties and reservoir properties, can be a very robust tool for quantitative reservoir characterization with less uncertainty.

• The Science & Technology
• /
• v.9 no.8 s.87
• /
• pp.23-27
• /
• 1976

우리나라에서 본격적으로 물리탐사를 시도한것은 1958~1960년에 실시한 항공자력탐사로서 그후 현재까지 불과 20년이 지나지 않았다. 그간 물리탐사의 기술발전으로 자원탐사분야에 많은 공헌이 있었다. 현재까지 주로 적용된 분야는 철자원탐사를 위한 자력탐사, 지하수조사를 위한 전기비저항탐사동, 연등의 통화금속광물탐사를 위한 각종 전기탐사, 제3기층 지질구조와 땜공사, 공업단지조성등의 기반암조사, 그리고 광산의 갱내 출수조사등을 위한 탄성파탐사, 우라늄자원을 위한 방사능탐사, 그리고 해저지질 및 자원조사를 위한 해상물리탐사등이다. 이와 동시에 석탄층조사를 위한 전기탐사 및 Model연구자력탐사의 전산처리 적용, 그리고 광물 및 암석의 물리적 성질등 학술분야에 대한 기초연구도 계속하여 왔다. 우리나라에 있어 물리탐사의 적용조건은 비교적 험악한 지형, 복잡한 지질구조, 광상의 불규칙 또는 소규모의 발달과 산재등이다. 이와 같은 특징은 탐사해석의 정도를 높이기 위하여 보다 고도의 과학기술문제의 해결을 요구하고 있으며 이와 동시에 현대적 탐사방법과 연구개발로 대상자원의 탐사지역확대와 지하심부 탐사등이 당면과제이다. 기술과제로서는 석탄 및 기타자원에 대한 물리검층탐사, 경상계 지질구조구명을 위한 탄성파탐사 및 동력탐사의 적용, 항공자력, 전자 및 방사능탐사 및 해양의 각종물리탐사의 기술개발이 있으며 그외 탐사자료의 전산처리기술 및 지구과학의 기초연구등이 있다.