• Journal of Korean Society of Steel Construction
• /
• v.13 no.1
• /
• pp.9-18
• /
• 2001

many steel tubular truss as roof structures are used of the large span structures Steel tubular sectioned truss has the structural merits in compared with other sections such as H, L-shape sections However it occurs local buckling at the joint of branch in truss and it makes the deterioration of loading capacity Loading capacity and deformation characteristics of truss joints are very complicate so it is very hard to predict exact solution of them Therefore this thesis dealt with T-type joints of steel circular hollow sectioned truss. A series of experimental scheme were planned and mainly experimental parameters were : ratio of diameter of branch-diameter of main chord(d/D). diameter-thickness(T/D) of main chord. In this paper predicted yield load capacity using by closed ring analysis method additionally compared with that of suggested by closed ring analysis method additionally compared with that of suggested by other countries.

• Journal of Korean Society of Steel Construction
• /
• v.23 no.2
• /
• pp.169-177
• /
• 2011

This paper presents the results of the systematic finite element analysis of the in-plane bending moment of T-joints subjected to cyclic loadings. T-joints were fabricated using high-strength, circular, hollow sections. Three-dimensional, nonlinear finite element models of the welded T-joints were constructed to investigate the strength, rotational-stiffness characteristics, and failure modes. A wide scope of structural behaviors explain the influence of the joint geometric parameters, such as the chord and brace wall slenderness ratios and the ratio of the brace to the chord diameter, as well as the yield strength ratios and compressive-chord-stress effects on the ultimate in-plane bending moment capacity of the T-joint.

• Explosives and Blasting
• /
• v.41 no.1
• /
• pp.32-45
• /
• 2023

Environmental regulations in Korea for blasting at industrial sites have conservative standards, which often result in reduced efficiency and cost-effectiveness due to the consideration of environmental regulations and public complaints. Therefore, there is a need for blasting methods that can reduce environmental damage while improving construction efficiency and cost-effectiveness. In this study, we analyzed the effects of the PA-Deck (Paraffin Air-Deck) blasting method, which is a kind of Air Decoupled Charge method in principle utilizing a paraffin-infused paper tube as an air gap, on reducing blasting hazards and improving blasting efficiency. The analysis also evaluated the effectiveness of newly applied equipment for collecting blasting vibration data, and derived the relationship between the explosion velocity and vibration velocity of explosives, and performed frequency analysis of the vertical component. The results of the blasting vibration velocity analysis showed that the Paraffin Waxed Paper Tube-based blasting method exhibited significantly lower vibration velocities compared to conventional blasting methods, and it was judged that more uniformly small-sized fragmented rocks were generated.

• Journal of Bio-Environment Control
• /
• v.21 no.3
• /
• pp.163-169
• /
• 2012

We have conducted three experiments to develop a fertilizer-dissolving apparatus used in fertigation or hydroponics cultivation in order to decrease the fertilizer dissolving time and labor input via automation. All of the experiments were conducted twice. In the first experiment, four selected treatments were tested to dissolve fertilizers rapidly. The first treatment was to dissolve fertilizer by spraying water with a submerged water pump, placed in the nutrient solution tank. The water was sprayed onto fertilizer, which is dissolved and filtered through the hemp cloth mounted on the upper part of the nutrient solution tank (Spray). The second treatment was to install a propeller on the bottom of the nutrient solution tank (Propeller). The third treatment was to produce a water stream with a submerged water pump, located at the bottom of the tank (Submerged). Finally, the fourth treatment was to produce an air stream through air pipes with an air compressor located at the bottom of the tank (Airflow). The Spray treatment was found to take the shortest time to dissolve fertilizer, yet it was inconvenient to implement and manage after installation. The Airflow treatment was thought to be the best method in terms of the time to dissolve, labor input, and automation. In the second experiment, Airflow treatment was investigated in more detail. In order to determine the optimal number of air pipe arms and their specification, different versions of 6- and 8-arm air pipe systems were evaluated. The apparatus with 6 arms (Arm-6) that was made of light density polyethylene was determined to be the best system, evaluated on its time to dissolve fertilizer, easiness to use regardless of the lid size of the tank, and easiness to produce and install. In the third experiment, the Submerged and Arm-6 treatments were compared for their dissolving time and economics. Arm-6 treatment decreased the dissolving time by 8 times and proved to be very economic. In addition, dissolving characteristics were investigated for $KNO_3$, $Ca(NO_3)_2{\cdot}4H_2O$, and Fe-EDTA.

• Journal of Korean Medical classics
• /
• v.22 no.3
• /
• pp.347-352
• /
• 2009

In the "Somun(素問) Youngranbijeonron(靈蘭秘典論)", that describes the lung as "the office of assisting Heart, the administration come out Lung(相傅之官, 治節出焉)". The means of "the office of assisting Heart" is that Lung assist Heart and execute the Heart's order. The administration come out Lung has two means. The first, Lung administrates and controls the body. The second, Lung controls the Gi and blood(氣血). In the "Somun(素問) Gyeongmaekboulron(經脈別論)", that describes the creation of pectrol Gi(宗氣). The Essence derived from food(穀氣) digested in Stomach comes to Heart, and mixed Lung's Gi of respiration(呼吸之氣), than becomes a pectrol Gi(宗氣). The pectrol Gi(宗氣) controls the Gi and blood(氣血), and we can say that function is the administration come out Lung.

• The Magazine of the Society of Air-Conditioning and Refrigerating Engineers of Korea
• /
• v.20 no.1
• /
• pp.15-28
• /
• 1991

불단수(不斷水) 공법(工法)은 기존(旣存)의 상수도(上水道) 배관(配管)으로 부터 지관(支管)을 분기(分岐)할때, 급수(給水)의 중단(中斷)없이 공사(工事)를 시행(施行)하는 방법이다. 이 방법(方法)은 이미 미국이나 유럽의 모든 국가(國家)에서 공통적으로 적용하고 있는 공법(工法)이며, 특히 일본(日本)은 우리나라와 상황(狀況)이 매우 유사하므로, 일본(日本)의 사례(事例)를 중심으로 불단수(不斷水) 공법(工法)의 개요(槪要)와 장단점(長斷點), 공법(工法)을 적용하기 위하여 필요한 장비(裝備)와 공구(工具) 및 관련 제품(製品)에 대하여 요약(要約) 기술(記述)하였다.

• Journal of Korean Medical classics
• /
• v.33 no.1
• /
• pp.159-178
• /
• 2020

Objectives : The purpose of this paper is to study the metaphor that the liver is the admiral from which strategic planning is derived in 『Suwen Linglanmidianlun』 in relation to Liver function. Methods : Annotations to the verse along with descriptions of strategic planning in classical texts and their relation were examined. Results : Previous annotators described the Admiral organ and Strategic Planning separately, in which it is difficult to fully explain the totality the two. They cannot be separated from each other, and only when they are in dependence of each other can they become complete. Liver function as described in classical texts and contemporary text books such as detoxification and sterilization all embody this meaning of strategic planning of an admiral. Conclusions : Reinterpretation of the Liver function based on an integrated understanding of the Liver as described in 『Suwen Linglanmidianlun』 is required. This will allow for better understanding of what the metaphor means, and to better connect this description to Liver physiology for an integrated understanding of the Liver itself in Korean Medicine.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2009.05a
• /
• pp.196-199
• /
• 2009

The most important thing is to analyze the Fast Cook Off problem of the solid motor case exposed to direct flame is a heat transfer analysis. Heat causes degradation and ignition of the propellant. To archive an acceptable reaction level in Fast Cook Off, the rocket motor case generally must fail structurally prior to propellant ignition. We investigate the responses of the solid motor case exposed to Fast Cook Off by using finite element method for the thermal analysis.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2000.11a
• /
• pp.131-131
• /
• 2000

백판지, KL, 지관원지, 석고원지 등의 산업 용지 지종에 주로 ace 계통의 저급 고지가 원료 로 주로 사용되고 있다 .. ace 고지는 크게 원산지별로 약간씩 상이한 물성을 나타내고 있는데 각 원지 요구 특성도 각각 다양하다. 효율적인 ace 고지의 이용을 위해서는 ace 고지 자체의 외관 특성 및 물리적인 특성을 정확하게 파악하는 것이 중요하다. 그러므로 본 연구에서는 각 O ace 원료의 특성을 파악하여 각 원지 특성에 적합한 물성을 나타내기 위한 ace data를 얻고 자하였다. 미산 ace, 국산 ace, 일본 ace의 물성을 측정하였다. 실험 결과 열단장이 각각 2.94, 2. 3 35, 2,2km로 미산 ace가 가장 우수하였고, 국산과 일본 ace 는 비슷한 열단장을 나타내고 있다. 파열강도도 역시 미산 ace가 가장 우수하였고, 국산과 일본 ace 는 비슷한 강도를 나 타내고 있다. 내절도의 경우에도(1.0kgf 압력하) 미산, 국산과 일본산이 각각 124, 19, 18회 를 나타내고 있다. 해리성의 경우에는 국산과 일본산은 98.9%의 해리율로 유사한 특성을 나타내고 있으나, 미 국산의 경우에는 89.0-96.9%로 상당히 낮은 해리율을 나타내고 있는데 미국산 ace의 경우에 는 습윤시 강도 향상을 위하여 습윤지력중강제의 투입으로 인하여 섬유 해섬에 방해가 되기 때 문이다. 해리성 향상을 위하여 펄핑 방법, 시간, 약품 (가성소다, 해리촉진제 등), Kneader 처 리 둥을 시도하여 보았다. 펄핑 시간과 가성소다의 투입 영향이 가장 큰 효과를 나타내었다. 이물질함량은 국산 ace가 가장 많았고, 미산, 일본산 ace가 가장 적었다.

• Transactions of the Korean hydrogen and new energy society
• /
• v.26 no.5
• /
• pp.438-444
• /
• 2015

This study describes the effect of T branch shape on internal flow characteristics inside itself. Continuity and three-dimensional Reynolds-averaged Navier-Stokes equation have been used as governing equations for the numerical analysis. The T branch was modeled assuming that it is used for Alaska pipeline project which was planned to provide reliable transportation of natural gas from ANS to Alaska-Yukon border. Therefore the characteristics of T branch and operating condition of pipeline were from report of Alaska pipeline project. The nine T branch shapes were analyzed and the mass flow rate ratio between mainline and branch was assumed to be 0.95 : 0.05, 0.9 : 0.1, 0.85 : 0.15. The results shows that there are typical flow patterns in T branch and the shape of T branch makes some differences to the internal flow of branch rather than mainline.