• Magazine of the Korean Society of Agricultural Engineers
• /
• v.37 no.2
• /
• pp.64-72
• /
• 1995

A series of cubical triaxial tests with three independent principal stresses was per- formed on Baekma river sand( # 40~100). It was found that the major principal strain at failure remained approximately constant for b values larger than about 0.3 for both the drained and undrained condition, and thereafter increased as b value decreased. The test results showed that the direction of the strain increment at failure form acute angles with the failure surfaces for both the drained and undrained condition. The results were thus not in agreement with the normality condition from classic plasticity theory. Howev- er, it was found that the projections of the plastic strain increment vectors on the octahe- dral plane were perpendicular to the failure surface in that plane. Failure strength in terms of effective stress anlaysis was greatly influenced by the variation of intermediate principal stress and so was failure criterion. The effective stress failure surfaces for both the drained and undrained condition were estimated quite well by use of Lade's failure criterion.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2023.05a
• /
• pp.477-477
• /
• 2023

빗물이용시설은 집수면적에 내린 빗물을 모아 이용가능하도록 처리하는 시설이며, 일정 면적 이상의 건축물에는 법적으로 빗물이용시설을 설치·운영하여야한다. 빗물이용시설의 저류조 용량은 간편식과 시뮬레이션, 수문모형으로 산정가능하며, 설계계획 수립시 대상지역의 강우 특성, 사용수량 등 지역 특성과 목적을 고려하여 저류조 용량이 결정된다. 저류조 용량 산정시 시뮬레이션을 이용하는 방법은 수문모형 사용에 비하여 용이하지만, 일단위 물수지분석을 구현하는데까지 시간이 소요된다. 간편식은 집수면적에 규모계수 0.05를 곱하여 간단히 구할 수 있지만, 지역 특성과 목적이 고려되어있지 않으며 초기 계획수립 및 개략 평가를 제외하고는 활용에 제약이 존재한다. 이에따라, 본 연구에서는 지역적 특성을 고려한 빗물저류조의 적정 규모 산정을 위해 개선된 간편식을 개발하였다. 빗물이용시설 물수지 분석 Excel 도구를 개발하였으며, 해당 물수지분석 결과에 상수대체율 효율을 기준으로 지역별 적정 저류조 규모 산정을 위한 규모계수를 도출하였다. 빗물사용 용도로써 폭염저감, 미세먼지저감, 조경, 화장실을 채택하였으며, 용도별 1일 사용수량을 산정 및 적용하였다. 7개의 연구대상지역 물수지분석을 위해 연구지역의 최근 10년 강우·미세먼지·기온데이터를 기상청으로부터 적용하였으며, 집수면적은 500-2500m²까지 500m²씩 증분, 저류조용량은 5-700m³까지 5m³씩 증분하여 지역별 적정 저류조 용량 규모계수를 선정하였다. 그 결과 연구대상지역의 적정 저류조 용량산정시 완도군의 규모계수는 평균 0.058이었으며, 보령시의 규모계수는 평균 0.040으로 도출되었다. 본 연구를 통하여 다양한 용도의 빗물사용처에 따른 지역별 저류조 용량 선정을 위한 지원도구로써 사용될 것으로 판단한다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.9 no.3
• /
• pp.65-73
• /
• 1989

Continuum formulations for the expressions of dynamic energy release rates and computational methods for dynamic stress intensity factors are developed for the analysis of dynamic fracture problems subjected to stress wave loading. Explicit volume integral expressions for instantaneous dynamic energy release rates are derived by modeling virtual crack extensions with the dynamic Eulerian-Lagrangian kinematic description. In the finite element applications a finite region around a crack-tip is modeled by using quarter-point singular isoparametric elements, and the volume integrals are evaluated for each crack-tip element during virtual crack extensions while the singularity is maintained. It is shown that the use of the present method is more reliable and accurate for the dynamic fracture analysis than that of other path-independent integral methods when the effects of stress waves are significant.

• Journal of the Korean Society for Precision Engineering
• /
• v.21 no.2
• /
• pp.116-121
• /
• 2004

In rigid-plastic finite element method, there is a heavy computation time and convergence problem. In this study, static-explicit rigid-plastic finite element method will be introduced. This method is the way that restrict the convergence interval. It is expected that various results from the numerical analysis will give very useful information for the design of tools in sheet metal forming process.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.53 no.1
• /
• pp.1-6
• /
• 2004

This paper suggests an extended power flow analysis algorithm based on a modified economic load dispatch concept. Meaningfully, the proposed method makes it possible to perform the power flow analysis without a slack bus. And the 'equal incremental cost' rule which is obtained by economic load dispatch prior to power flow is maintained even during the proposed power flow analysis. In this paper, both 5 - bus and 14 - bus power systems are used to offer the theoretical accuracy and practical applications of this algorithm.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1997.03a
• /
• pp.159-164
• /
• 1997

The optimal conditions were investigated in order to manufacture the light automotive body parts using the semi-solid forging process by the finite element nalysis. Considering about macro-segregation cause to difference of relative velocity between solid phase and liquid phase, solidificational phenomenon cause to heat transfer from die and export of the latent heat, so solid fraction updating algorithm can be proposed. The rigid thermo-viscoplastic finite element analysis was carried out according to die temperature with proposed algorithm, so availability of forming part were understood. The finite element program can be used to the analysis of semi solid forging process.

• Journal of Advanced Marine Engineering and Technology
• /
• v.18 no.4
• /
• pp.69-76
• /
• 1994

Thermal elasto-plastic analysis of axi-symmetric body by the finite element method is presented in this paper for analyzing the process of upset forming of circular section extruded bar. The example of calculation for upset forming of Nimonic extruded bar is also presented. It is shown that remeshing of quadrilateral finite element is necessary because the very highly distorted element by plastic deformation disturbs the calculation. Calculated values for nodal points in new mesh are obtained from nodal points of old mesh by linear interpolation method. The experimental results are compared with calculated values. The appearance of upsetupset forming obtained by experimental method is very similar to that obtained by calculations. So, it is proved that the thermal elasto-plastic analysis of axi-symmetric body by the finite element method is very useful for finding the optimum upsetting condition.

• Journal of Korea Port Economic Association
• /
• v.37 no.1
• /
• pp.1-18
• /
• 2021

A coastal marine ranching project in Uleungdo had been conducted for 5 years from 2013 to 2017 with investment costs of 5 billion won, for the special purpose of the deployment of artificial reefs, the release of young fishes. The paper focuses on an ex-post analysis of the economic feasibility for the project after completing the project, which is apart from a preliminary viability. For economic analysis, the economic benefits are derived from direct benefits including increasing effects of fisheries income and saving effects of harvesting costs, and indirect benefits including increasing effects of recreational fishing and preservation effects of coastal marine ecosystems while economic costs include releasing and purchasing costs of artificial reef and juvenile fish, R&D costs, maintenance costs and harvesting costs. The result shows that the project should not be accepted according to NPV=-0.125 billion won, IRR=4.5% and B/C ratio=0.98 under Scenario 1 which considers direct benefits and indirect benefits excluding the preservation values, while the project should be accepted under Scenario 2 indicating NPV=30.9 billion won, IRR=11.3% and B/C ratio=1.49 which considers the direct benefits as well as the indirect ones including the preservation values, based on 4.5% of the social rate of discount.

• Journal of the Korean Society for Railway
• /
• v.15 no.5
• /
• pp.467-475
• /
• 2012

Static and dynamic train load tests were conducted to evaluate the train load transfer mechanism in the roadbed which was retained by two types (fully and partially) of segmental retaining walls reinforced by geogrid. The test roadbed was 2.6m high, 5m wide, and 6m long. A combination of earth pressure gages, displacement transducers, and strain gages were placed in specific locations to measure the responses. Test results showed that the wall displacement pattern as well as the earth pressure for the fully reinforced retaining wall was different from those for the partially reinforced retaining wall. In the dynamic train load test, the strain in the upper part of the wall tended to decrease, and both the residual deformation and the rate of the deformation were significantly lower than those in the current design standard.

• Geotechnical Engineering
• /
• v.4 no.3
• /
• pp.35-42
• /
• 1988

A series of consolidated-undrained cubical triaxial tests was performed to investigate the three- dimensional strength characteristics of anisotropic overconsolidated clay. All specimens sampled in field were loaded under conditions of principal stress directions fixed and aligned with the directions during sampling. A sufficient number of tests It was performed to deter.mine the three- dimensional failure surface in the octahedral plane. The adjusted effective friction angles obtained by the stress state projected on the same octahedral plane did not show anisotropy, while the measured effective friction angles showed considerally difference according to the axes of speccimens. Therefore, Lade failure criterion proposed fort isotropic materials could be also used practically for anisotropic overconsolidated clay. The direction of the plastic strain increment wrectors superimposed on the principal stress space was nearly perpendicular to the traces of the failure surface in the octahedral plane.