• 한국신재생에너지학회:학술대회논문집
• /
• 2010.06a
• /
• pp.71.2-71.2
• /
• 2010

CIS(CuInSe2)계 화합물 태양전지는 높은 광흡수계수와 열적 안정성으로 고효율의 태양전지 제조가 가능하여 화합물 태양전지용 광흡수층으로서 매우 이상적이다. 또한 In 일부를 Ga으로 치환하여 밴드갭을 조절할 수 있는 장점이 있다. 미국 NREL에서는 Co-evaporation 방법을 이용해 20%의 에너지 변환 효율을 달성하였다고 보고된바가 있다. 본 연구에서는 미국의 NREL과 같은 3 stage 방식을 이용하여 광흡수층을 제조하고자 한다. 본 실험에서는 Se 증기압을 각각 $200^{\circ}C$, $230^{\circ}C$, $240^{\circ}C$, $245^{\circ}C$로 달리 하며 실험을 실시하였다. 이때 1st stage의 시간은 15분으로 고정하였으며 기판온도는 약 $250^{\circ}C$로 고정 하였다. 2nd stage는 실시간 온도 감지 장치를 이용하여 Cu와 In+Ga의 조성비가 1:1이 되는 시간을 기준으로 Cu의 조성을 30%더 높게 조절하였으며 기판 온도는 약 $520^{\circ}C$로 고정 후 실험을 실시하였다. 3rd stage의 경우 Cu poor 조성으로 조절하기 위해 모든 조건을 10분으로 고정 후 실험을 실시하였다. 각각의 Se 증기압에 따른 물리적, 전기적 특성을 알아보기 위해 FE-SEM, EDS, XRD 분석을 실시하였다. 본 연구에서 기판은 Na이 첨가되어있는 soda-lime glass를 사용 하였으며 후면 전극으로 약60nm 두께의 Mo를 DC Sputtering 방법을 이용해 증착 하였다.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.06a
• /
• pp.62.1-62.1
• /
• 2010

CIS(CuInSe2)계 화합물 태양전지는 높은 광흡수계수와 열적 안정성 및 조성 조절을 통한 밴드갭 조절이 용이해 고효율 박막 태양전지로 각광 받고 있다. 또한 CIGS 태양전지는 기존의 유리기판 대신 유연한 기판을 사용해 flexible 태양전지 제조가 가능하다. 이러한 유연기판은 보통 stainless steel과 같은 금속 기판이 많이 사용되는데 기존의 soda-lime glass 기판과는 달리 금속기판에는 Na이 첨가되어 있지 않아 별도의 Na첨가를 필요로 한다. Na은 CIGS 흡수층의 조성조절을 용이하게 하여 태양전지의 변환 효율을 향상시키는 역할을 한다. 본 연구에서 기판은 Na이 첨가되어있지 않은 corning glass를 사용 하였으며 NaF를 이용해 Mo가 증착된 기판에 NaF의 두께를 달리하며 증착해 CIGS 흡수층의 grain 사이즈를 비교 하였으며 그 후 태양전지 소자를 제조해 광전특성을 분석하였다. 후면 전극으로 약60nm 두께의 Mo를 DC Sputtering 방법을 이용해 증착 하였다. buffer층으로는 약 50nm의 CdS층을 CBD방법을 이용하여 제조 하였으며 TCO 층으로 약 50nm의 i-ZnO와 약 450nm의 Al-ZnO를 RF Sputtering방법으로 증착 하였다. 마지막으로 앞면 전극으로 약 $1{\mu}m$의 Al을 Thermal Evaporation방법으로 증착하였다. 태양전지 소자의 면적은 $0.49cm^2$로 효율을 비교 분석하였다.

• Journal of the Korean Society of Visualization
• /
• v.15 no.2
• /
• pp.16-20
• /
• 2017

A coffee-ring effect is from capillary flow by different evaporation rate across the droplet. The capillary flow tends particles to accumulate at the edges of the droplet and makes the ring-shaped stain pattern. These coffee-ring formation and suppression of coffee-ring have been a critical role in printing and coating technologies. In this study, we present the experimental study on coffee-ring effect of silver nanowire inside the evaporating sessile droplet. Size and concentration effect of nanowires at coffee-ring effect has been investigated. From the coffee-ring, we observed the regimes of connected rings and disconnected ones and measure the resistivity of single ring pattern with different nanowire length.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2009.05a
• /
• pp.929-933
• /
• 2009

전 세계적으로 기후변화와 이상기후에 대한 관심이 높아지고 있다. IPCC(2001)는 "기후변화"라는 요소가 기온 증가, 강우강도 및 빈도 변화와 이들로 인한 증발산의 변화, 유출량의 시 공간적 변동을 초래하여 수자원의 효율적 관리 및 안정적인 공급에 어려움을 증대시킬 것으로 전망하였다. 이에 따라 세계 각국은 미래 기후에 대한 보다 정확한 정보를 얻기 위하여 IPCC 권장 시나리오인 SRES(Special Report in Emission Scenario)기반의 GCM(General Circulation Model)과 RCM(Regional Circulation Model)을 이용하고 있으며 특히, 최근에는 고해상도 자료를 생산함으로써 국부지역에 대한 지형학적 특성을 효과적으로 모의할 수 있는 RCM 모형을 이용한 연구가 국외를 중심으로 진행되고 있다(권현한 등, 2008). 본 연구에서는 미래 한강 유역의 수자원 변동성을 평가하기 위하여 CA-Markov Chain 기법으로부터 토지이용변화를, 기온과 강수자료을 독립변수로 이용한 다중 회귀식으로부터 미래 NDVI를 추정하고 기상청에서 제공하는 RegCM3-지역지후모형으로부터 축소기법을 이용하여 추정된 KMA RCM 50set 기후변화시나리오를 SLURP 모형에 입력하였다. 2001년부터 2090년까지 총 90년에 대한 한강 유역의 미래 유출모의를 실시한 후 각 댐별 과거와 미래 유출량을 월별로 비교하고 이들의 유황분석을 실시하였다.

• Journal of Energy Engineering
• /
• v.12 no.1
• /
• pp.17-22
• /
• 2003

The present study was conducted to obtain the fundamental knowledge on the manufacturing and operating characteristics of a small scale CPL (Capillary Pumped Loop) heat pipe. CPL heat pipes are able to transfer heat effectively at any orientation in a gravitational field over long distances. An experimental model with an evaporator of a circular plate shape was designed and manufactured and its operating performances were tested. A Bronze powder sintered metal plate of 3 mm thick and $\Psi$ 50 mm was used as wick and ethanol was used as working fluid. An experimental apparatus was set up to ascertain the operating conditions oi CPL at different heat load and an surrounding temperature at the condenser was maintained about 13$^{\circ}C$.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.36 no.10
• /
• pp.1011-1016
• /
• 2008

Jet-A spray and combustion were numerically analyzed in annular type combustor model using KIVA3V. The combustor geometry have 6 dilute holes. Swirl effect and thermal NO were considered in this investigation to analyze mixing and combustion characteristics. Fuel vapor, flame temperature, NO generation were investigated for various spray angle. As increase of spray angle, Jet-A vapor appeared uniformly in primary zone and evaporation rate was increased. Mixing between fuel vapor and ambient gas was enhanced as increase of spray angle. As a result, high temperature region appeared widely and thermal NO generation rate was increased.

• Journal of the Korean Applied Science and Technology
• /
• v.35 no.1
• /
• pp.284-291
• /
• 2018

In this study, a dust inhibitor for road dust was prepared by using molecular structure, molecular weight, viscosity, hydrophilicity, swelling, wetting and moisturizing properties of natural polysaccharide which is widely used as food and cosmetic materials. Various dust control effects were confirmed and superior results were obtained than simple water spraying and synthetic for control(PVA). In addition, the comparison of water evaporation, scattering inhibition rate, Field test, and determining acute lethality of effluents to Daphnia magna were studied and the safety of soil and water quality was studied. The availability of the dust inhibitor was confirmed.

• Elastomers and Composites
• /
• v.46 no.2
• /
• pp.125-131
• /
• 2011

The effects of chopped kenaf fiber concentration on mechanical property of polypropylene (PP) composite are investigated. The addition of kenaf increased the tensile strength, flexural modulus, impact strength, specific gravity, and HDT, while decreased the elongation%, flexural strength, and melt flow index. The increase of mechanical properties is due to increased surface area contacting between fiber and polymer matrix and fiber-fiber interaction. Volatile extractives in the kenaf seemed to decrease the interfacial adhesion between kenaf surface and PP.

• Korean Journal of Poultry Science
• /
• v.20 no.1
• /
• pp.33-41
• /
• 1993

Among the several factors that affect shelf-life of washed shell eggs, storage temperature and relative humidity were the most important. Besides those factors listed above, temperature of washing water, composition of foreign substances and washing method of eggs were also the factors affecting the shelf-life of the eggs. The effect of sanitizer treatment was significant in extending the shelf-life of eggs compared with washed and unwashed eggs. In case of oil coating treatment, the shell eggs treated showed the better results than that of washed and unwashed eggs because the coating materials prevented the moisture evaporation from the inner shell eggs and kept the contamination of microorganisms from the environment. Consequently, it is considered that reducing egg shell contamination of microorganisms and proper treatment could be the key to extend the shelf-life of shell eggs.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.6 no.4
• /
• pp.388-398
• /
• 1994

Computer simulation model for predicting more accurately the heat transfer performance of the evaporator and condenser which have significantly affected on the performance of air-conditioner has been suggested. In this model oil and micro-fin tube used in a actual unit are considered to simulate the more realistic case. The effects of oil and micro-fin tube on the performance of an air-conditioner have been investigated. It is found that the present model requires higher pressure than the existing model due to the characteristics of the tube considered. However, it turns out that the present model is very close to an actual cycle. As the amount of oil inside the tube increases, condensation heat transfer coefficient shows a linear decrease irrespective of a kind of oil, while evaporation heat transfer coefficient increases slightly in the oil with low viscosity and decreases exponentially in the oil with high viscosity. Pressure drop in both evaporator and condenser increases linearly irrespective of a kind of oil. It is also found that the effect of the variation of oil concentration on the magnitude of two-phase region is negligible.