• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 1996.03a
• /
• pp.200-204
• /
• 1996

It is a great number of problem for the man to perform maintenance and repairing work owing to radioactive effusion for a nuclear fuel and the pollution of an related equipment in nuclear power plants. Therefore, the vision processing system presented in this research requires to maintain the good performance under the radioactive circumstances and to safety the real time processing system presented in this research requires to maintain the good performance under the radioactive circumstances and to safety the real time processing. The proposed vision scheme adapts the gradient and Laplacian operator to perform the high speed processing in an edge detection and the centroid formula at each direction to obtain the center position of a holes using DSPs

• Environmental and Resource Economics Review
• /
• v.30 no.4
• /
• pp.557-579
• /
• 2021

Collective energy is an intermediate stage in energy conversion and has a great influence on the power structure as a distributed power source. However, the problem of the collective energy business has recently emerged due to the worsening profitability of some collective energy operators. This study measured the technical efficiency of major operators through the estimation of the production efficiency of Korean collective energy operators, and based on this, we looked at ways to improve the profit structure of operators. After collecting detailed data from 16 collective energy operators between 2016 and 2019, the production efficiency of operators was estimated using the panel stochastic frontier model. As a result of the estimation, combined steam power operators showed the highest production efficiency and reverse CHP operators showed the lowest efficiency. Furthermore, as a result of examining the factors influencing profitability, it was confirmed that production efficiency has a positive effect on overall profitability. However, businesses with a high proportion of heat production, such as small district electricity operators, profitability was lower. This phenomenon is due to the structural limitations of the current heat sales market. Hence, the adjustment of the heat sales unit price is necessary to improve profitability of collective energy operators.

• Journal of the Korea Concrete Institute
• /
• v.26 no.2
• /
• pp.117-124
• /
• 2014

Globally, there are environmental problems due to greenhouse gas emissions. $CO_2$ emissions rate of the cement industry is very high, but the continued demand of cement is needed in the future. In this study, in order to reduce the environmental impact of $CO_2$ emissions from cement production. The experiments were carried out for the development of non-sintered cement (have not undergone firing burning) by granulated ground blast furnace slag. In order to compare the characteristics by curing, an experiment was conducted by changing the curing conditions such as atmospheric steam curing, observe the mechanical properties for the measurement of flexural compressive strength by mortar, observe the chemical properties such as acid resistance, $Cl^-$ penetrate resistance and analyzed the mechanism of hydration by XRD, SEM experiments. From the experimental results, as compared with portland cement usually confirm the mechanical and chemical properties excellent, it is expected be possible to apply to the undersea, underwater and underground structures that require superior durability. In addition, based on the excellent compressive strength by steam curing, it is expected to be possible to utilize as a cement replacement material in the secondary product of concrete. In the future, to solve the problem through continued research, it will be expected to reduce the effect of environmental load and to be excellent economics.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.40 no.6
• /
• pp.397-402
• /
• 2016

To produce adequate electricity in nuclear and thermal power plants, an optimal amount of steam should be supplied to a generator connected to high- and low-pressure steam turbines. A turbine output control device, which is a special steam valve employed to supply or interrupt the steam to the turbine, is operated using a hydraulic servo actuator. In power plants, the performance of servo actuators is degraded by the air generated from the hydraulic system, or causes frequent failures owing to an increase in the wear of the seal. This is due to the seal being burnt as generated heat using the produced compressed air. Some power plants have exhausted air using a fixed orifice, and thus they encounter power loss due to mass flow exhaust. Failures are generated in hydraulic pumps, electric motors, and valves, which are frequently operated. In this study, we perform modeling and analysis of the load-sensing air-exhaust valves, which can be passed through very fine flow under normal use conditions, and exhaust mass flow air at the beginning stage as with existing fixed orifices. Then, we propose a method to prevent failures due to the compressed air, and to ensure the control accuracy of hydraulic servo actuators.

• Resources Recycling
• /
• v.31 no.5
• /
• pp.42-51
• /
• 2022

Aggregate resources in Korea are expected to run out owing to an increase in development demand and construction investment. Recycled concrete aggregates (RCA), extracted from waste concrete, have a lower quality than natural aggregates. However, RCA can produce concrete similar in quality to the normal concrete by aggregate pretreatment, use of admixtures, and quality control. RCA are most suitable for use in precast concrete products such as sidewalk blocks and revetment blocks. Herein, the feasibility of producing revetment blocks using recycled aggregate concrete (RAC), similar in quality to normal concrete, was analyzed. The amount of RCA was varied, and moderate high early strength cement and steam curing were used to produce the concrete test blocks. In the block test, the load resistance characteristics of the blocks were evaluated to determine optimal RAC and glass fiber reinforced polymer (GFRP) rebar compositions. Thus, the variable that reduced the cement content was determined at the same level as that of natural aggregate concrete by the control of steam curing. In the concrete block test, although this depends on the reinforcement ratio, the RAC block exhibited the same or better performance than a normal concrete block. Therefore, the low quality of RCA in RAC is no longer a problem when concrete mixing and curing are controlled and appropriate reinforcement is used.

• Industry Promotion Research
• /
• v.9 no.2
• /
• pp.37-44
• /
• 2024

This study selected the worst-case scenario for fireball and vapor cloud explosion (VCE) of a styrene monomer storage tank installed in a petrochemical production plant and performed damage prediction and accident impact analysis. The range of influence of radiant heat and overpressure due to fireball and vapor VCE during the abnormal polymerization reaction of styrene monomer, the main component of the mixed residue oil storage tank, was quantitatively analyzed by applying the e-CA accident damage prediction program. The damage impact areas of radiant heat and explosion overpressure are analyzed to have a maximum radius of 1,150m and 626m, respectively. People within 1,150m of radiant heat of 4kW/m2 may have their skin swell when exposed to it for 20 seconds. In buildings within 626m, where an explosion overpressure of 21kPa is applied, steel structures may be damaged and separated from the foundation, and people may suffer physical injuries. In the event of a fire, explosion or leak, determine the risk standards such as the degree of risk and acceptability to workers in the work place, nearby residents, or surrounding facilities due to radiant heat or overpressure, identify the hazards and risks of the materials handled, and establish an emergency response system. It is expected that it will be helpful in establishing measures to minimize damage to workplaces through improvement and investment activities.

• Journal of Sensor Science and Technology
• /
• v.32 no.5
• /
• pp.328-333
• /
• 2023

This study experimentally verified the etch rate of the SiO₂ sacrificial layer etching process with a single etch hole using vapor-phase hydrogen fluoride (VHF) etching. To fabricate small-sized polysilicon etch holes, both circular and triangular pattern masks were employed. Etch holes were fabricated in the polysilicon thin film on the SiO₂ sacrificial layer, and VHF etching was performed to release the polysilicon thin film. The lateral etch rate was measured for varying etch hole sizes and sacrificial layer thicknesses. Based on the measured results, we obtained an approximate equation for the etch rate as a function of the etch hole size and sacrificial layer thickness. The etch rates obtained in this study can be utilized to minimize structural damage caused by incomplete or excessive etching in sacrificial layer processes. In addition, the results of this study provide insights for optimizing sacrificial layer etching and properly designing the size and spacing of the etch holes. In the future, further research will be conducted to explore the formation of structures using chemical vapor deposition (CVD) processes to simultaneously seal etch hole and prevent adhesion owing to polysilicon film vibration.

• Journal of the Korea Furniture Society
• /
• v.21 no.6
• /
• pp.459-468
• /
• 2010

Materials are such an important factor in designing furniture. Wood is the biggest part of furniture materials. While wood is soft, eco-friendly and natural material, it is variable because it is characterized by severe expansion and contraction. Thus, if the changeable characteristic of wood is not considered in furniture design, the good design of furniture cannot be produced. As one of the skills dealing with woods, bending is such a useful way for making various forms of furniture. While it has been used in furniture-making for a long time, wood processing techniques like steaming bending, bending with ammonia and high frequency bending has been advanced. As wood is a viscoelastic material and has some plasticity, beautiful curves can be created when force is applied. Therefore this paper studies the types of bending methods for furniture and each characteristic of them. Furthermore, this study classifies wood process according to suitability for mass production or small-scale production and researches the proper wood process by the forms and the way of furniture production. Also this study aims to help furniture designers and cabinet makers with wood bending.

• The Journal of the Korea Contents Association
• /
• v.18 no.9
• /
• pp.390-398
• /
• 2018

The purpose of this study is to analyze the relationship between local economy and local universities focusing on the job creation. The study estimates the impacts of industry-university cooperation expenditure in 2018 on the Korean industry using the 2014 input-output table released by the Bank of Korea in 2016. The results show that the effect of production inducement was 30.2 trillion Won which reached 1.5 times of the total industry-university cooperation expenditure 19.6 trillion Won. The effect of labor inducement was estimated to employ 35 thousand people. With respect to the effects of inter-industries, the professional, scientific and technical activities, information and communication, and education sectors showed much higher effect of both production and labor inducement in the Korean industry. Therefore, the industry-university cooperation expenditure in Korea has to be focused on those industries in order to increase job creation effects from industry-university cooperation.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.06a
• /
• pp.83.2-83.2
• /
• 2010

최근, 원유 가격의 상승으로 인해 태양에너지에 대한 관심이 크게 증가되고 있다. 그러나 이러한 태양전지용 Si(SoG-Si)의 대부분을 차지하는 태양전지급 다결정 실리콘 원료를 대부분 수입에 의존하고 있는 실정이다. 이에 대한 기술적 대응으로서 최근에는 고비용의 기상법을 해결하기 위하여 야금학적인 정련법을 이용한 제조기술 개발이 세계적으로 주목받고 있으며, 야금학적 정련기술은 지적재산권에 관한 기술적 배타성을 제고 할 수 있을 뿐 만 아니라 기상법의 Si 대비 낮은 품위 에도 불구하고 태양전지용 실리콘의 사용가능성을 제시함으로서 활발한 연구와 함께 실용화기술로 대두되고 있다. 그러므로 본 연구는 기존 사용 중인 고가의 기상법 폴리실리콘 제조와 달리, 생산 가격경쟁력이 있는 규석광으로부터 고순도금속 및 태양전지급 폴리실리콘 생산 연속 종전기술을 개발하고자 하였다. 금속급 Si(이하 MG-Si)으로부터 경제적인 SoG-Si을 제조하기 위한 공정 개발을 일환으로 MG-Si 중 불순물인 P 원소를 효과적으로 정련할 수 있는 슬래그 정련기술 개발과 슬래그설계 기술개발을 기본목표로 설정하여 고찰하였다. 용융 Silicon과 슬래그계면에 설정되는 산소분압제어에 따른 슬래그의 P의 이온 안정성을 변화시킴으로서, MG-Si중 P를 분리제거를 기본개념으로 설정하였다. 염기성 산화물로 산소이온이 공급됨을 이용하여 염기도에 따른 분배비를 고찰한 결과, CaO의 활동도가 증가함에 따라 슬래그 중 $O^{2-}$의 활동도와 함께 phosphide 이온의 안정성이 증가함을 확인하였다. 그리고 슬래그로부터 실리콘 중 Ca의 용해도에 따른 분배비를 확인하기 위해 실험 후 Si에서 Ca의 성분을 분석한 결과, 실리콘 중 Ca 용해도는 염기도($a_{CaO}/\sqrt{a_{SiO_2}}$)의 증가와 함께 증가하였으며, Ca의 용해도 증가는 탈린능을 증가시킨다는 것을 알 수 있었다. 또한 수소분압을 변화시켜 인의 증기압변화 및 기화정련 효과를 알 수 있었으며, acid leaching을 통해 잔존해있는 불순물을 추가적으로 정련될 수 있는 가능성을 확인할 수 있었다.