• Journal of the Korea Organic Resources Recycling Association
• /
• v.7 no.2
• /
• pp.83-92
• /
• 1999

Chitosan was prepared from chitin which was abstracted from wasted crab shells. Then itaconic acid was graft-copolymerized onto chitosan using ceric ammonium nitrate as a reaction initiator. To investigate the optimal grafting conditions, the influences of several factors on the grafting were studied, i. e., the concentrations of CAN and itaconic acid, the reaction temperature and time. And to find out its flocculation ability. the flocculation test was carried out with a metal plating factory waste water. The state of graft-copolymer was identified through IR spectra analysis. The optimal grafting conditions and flocculation results were shown to be : concentration of ceric ammonium nitrate is $3.5{\times}10^3M$, reaction temperature is $40^{\circ}C$ and reaction time is 4hrs with 0.25M of the monomer(itaconic acid). Though flocculation tests using chitosan, grafted chitosan and cation, CODcr. metal ions removal rates were measured. The order of superiority is Itaconic acid grafted chitosan>Chitosan>Cationic polymer.

• Polymer(Korea)
• /
• v.30 no.1
• /
• pp.56-63
• /
• 2006

We have synthesized two types of diamine monomers containing various chain length to prepare polyimides with layered structure. By using these diamines, homo-polyimides and co-polyimides having hydrophobic and hydrophilic segment of flexible side chain were synthesized. The segregated layered structures were formed by repulsive force with main chain as the side chains reach a critical length because the rigid main chains are packed into layered structure with the flexible side chains occupying the space between layers. As a result, the gallery space of each homo-polyimide was increased at spacing of $32.7\~48{\AA}\;or\;7\~10.5{\AA}$ as the increased hydrophobic or hydrophilic side chain length through X-ray diffraction. The gallery space of co-polyimides was also showed similar phenomenon by repulsive force of side chains with different properties. We have also confirmed that gallery space and molar volume were significantly depended on length of flexible side chain via molecular modeling.

• Membrane Journal
• /
• v.24 no.1
• /
• pp.1-9
• /
• 2014

In this study, four soluble homo- and co-polyimides using 5-(2,5-dioxotetrahydrofuryl)-3-methyl-3-cyclohexene-1,2-dicarboxylic anhydride (DOCDA) and 4,4'-diaminodiphenyl ether (ODA) monomers were synthesized to develop the gas separation membrane with good $CO_2/CH_4$ separation properties. To prepare the copolyimides, 20 mol% of three dianhydrides - (4,4'-(hexafluoroisoproplidene)diphthalic anhydride (6FDA), 4,4'-biphthalic anhydride (BPDA), 3,3',4,4'-benzophenone tetracarboxylic dianhydride (BTDA) - were added in DOCDA-ODA monomer mixture, respectively. All the synthesized homo- and co-polyimides were characterized by FT-IR. Their thermal properties were analyzed with differential scanning calorimeter (DSC). Dense membranes were prepared from these copolyimides to check their gas permeation properties for $CO_2$ and $CH_4$ gases using a time-lag method. The permeation testing results are as follows; DOCDA/ODA homopolymer showed 1.71 barrer of $CO_2$ permeability and 74.35 of $CO_2/CH_4$ selectivity. The three polyimide copolymers (DOCDA/6FDA-ODA, DOCDA/BPDA-ODA, DOCDA/BTDA-ODA) showed lower $CO_2/CH_4$ selectivities and higher $CO_2$ permeabilities than the homopolymer (DOCDA-ODA). DOCDA/6FDA-ODA showed twice times higher $CO_2$ permeabilities without severe $CO_2/CH_4$ selectivity loss than the DOCDA-ODA.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.2
• /
• pp.528-535
• /
• 2016

Two types of oleophilic acrylic prepolymers were prepared by the solution copolymerization of either ethyl acrylate (EA) or lauryl acrylate (LA) with hydroxy ethyl acrylate (HEA). For the formation of oil-absorbent materials, a mixed solution of the prepolymer and hexamethylene diisocyanate (HDI) as a cross-linker in toluene was applied to polypropylene knit velvet fabric through the conventional pad-dry-cure procedure. The gel fraction of the crosslinked resin, EA-HEA-HDI, increased with increasing feed ratio of HEA to total acrylate or HDI concentration. The oil absorbancy and retention ratio of the prepared materials were compared according to the add-on ratio of resin to fabric, and were assessed with n-decane, toluene, soybean oil, lubricant and bunker C oil as test oils. The optimal oil absorbancy of the materials were observed at around 6% of the add-on ratio for all these oils except for soybean oil. On the other hand, the oil retention ratio increased as the add-on ratio increased. Futhermore, heavier and more viscous oil generally showed higher oil retention ratios. In addition, the oil absorbancy of the materials treated with LA-HEA-HDI resin was higher than that treated with EA-HEA-HDI resin, which showed that the acrylic resins are more absorptive with increasing length of their side alkyl chain.

• Analytical Science and Technology
• /
• v.8 no.1
• /
• pp.1-7
• /
• 1995

Spectrophotometric determination of U(VI) and Th(IV) by Flow injection method is described. Chrome Azurol S forms water soluble complexes with U(VI) and Th(IV) in the presence of cethyltrimethylammonium bromide. The maximum adsorption of U(VI) and Th(IV) complexes are at 600nm with molar absorptivity of $2.3{\times}10^5Lmol^{-1}cm^{-1}$ and 611nm with molar absorptivity of $3.8{\times}10^5Lmol^{-1}cm^{-1}$ in acetate buffer medium having pH 5.0 and 5.5. The calibration curves of U(VI) and Th(IV) are linear over the range of 0.1~0.8ppm and the correlation coefficients are ca. 0.9960 and 0.9930 respectively. The detection limits(S/N) are 20ppb for U(VI) and 15ppb for Th(IV). The relative standard deviation are ${\pm}1.8%$ for U(VI) and ${\pm}2.1%$ for Th(IV). The sample throughput was ca. $50hr^{-1}$.

• Applied Chemistry for Engineering
• /
• v.1 no.2
• /
• pp.190-196
• /
• 1990

The biological active monomer, 1-(methacryloyloxymethyl)-5-fluorouracil(MAOMFU) was synthesized from 2, 4-bis(trimethylsilyloxy)-5-fluoropyrimidine. Poly(MAOMFU) poly(1-methacryloyloxymethyl-5-f1uorouracil-co-methyl methacrylate), and poly(MAOMFU-co-MMA) were also obtained by radical polymerization at $60^{\circ}C$. The monomer reactivity ratios, $r_1$ and $r_2$ were determined by $Kelen-T\ddot{u}d\ddot{o}s$ method ; $r_1(MAOMFU)=0.72$, and $r_2(MMA)=1.24$. These reactivity values imply that the copolymerization was mainly affected by the steric hindrance of MAOMFU. It was found from kinetic measurements that the rate constants of solvolysis are given as $6.42{\times}10^{-5}sec^{-1}$ and $7.40{\times}10^{-6}sec^{-6}$, respectively, for MAOMFU and poly(MAOMFU).

• Applied Chemistry for Engineering
• /
• v.21 no.5
• /
• pp.542-547
• /
• 2010

n-Paraffin and saturated fatty acid methyl esters in the diesel and bio-diesel fuel crystallize at low temperature. Many articles have addressed various solutions for the low temperature crystallization problem and one of them is the use of methacrylate copolymers. In this work, we synthesized a series of copolymers in the reaction condition of 70 : 30 molar ratio of lauryl methacrylate (LMA) (or stearyl methacrylate (SMA)) and alkyl methacrylates. The structures of the copolymers were characterized by $^1H$-NMR and FT-IR spectroscopy, and the molecular weight of copolymers were obtained from Gel Permeation Chromatography (GPC) method. The concentrations of additives were 500~1000 ppm and 1000~10000 ppm in diesel fuels and bio-diesel fuel (BD5 and BD20), respectively. The addition of copolymers changes the many properties of fuel such as the pour point (PP), cloud point (CP) and cold filtering plugging point (CFPP). For example, the low temperature properties of the copolymers containing SMA ($PSMAmR_2n$) were excellently improved about 15, 7, and $10^{\circ}C$ for PP, CP and CFPP, respectively.

• Applied Chemistry for Engineering
• /
• v.7 no.3
• /
• pp.588-596
• /
• 1996

The optimum conditions of the 1st and 2nd distillation had been investigated to obtaine a high quality monomeric MDI and fire reactive polymeric MDI by purification of crude MDI. Effect of additives on the monomeric MDI's color change, dimerization and the reactivity of polymeric MDI with standard polyol system has been tested. When the monomeric MDI yield is approximately 32%, 4,4'-MDI content is above 98% in the monomeric MDI at the 1st distillation. When the separation ratio of initial portion and residue percentage, reflux ratio are set at respectively, approximately 20wt%, 9wt%, above 2 in order to minimize the content of 2,4'-MDI in monomeric MDI, the freezing point of final distilled monomeric MDI is above $38.4^{\circ}C$. Since the monomeric MDI is inherently unstable in the room condition, monomeric MDI easily changes it's color and conducts self-polymerization reaction. To increase the stability of monomeric MDI, the composition of antioxidant, which is composed of phenolic 1st antioxidant, phosphorus 2nd antioxidant, UV absorbent and Hindered amine light stabilizer are used, and benzoyl chloride as antipolymerization agent test are that APHA color is less than 20, dimer content is remained less than 0.36wt% after 45 days storage of monomeric MDI.

• Korean Journal of Food Science and Technology
• /
• v.30 no.1
• /
• pp.230-236
• /
• 1998

We have screened total 32 herbal drugs to find the highest activity against human cariogenic enzyme, glucosyltransferase (GTase) from the extracts of Magnoliae bark. The extracts were separated into three phases, i. e. water, n-butanol and ethylacetate according to their solvent polarity. Among them, ethylacetate fraction had approximately more than 70% of total activities, and the active principle was further isolated by prep. HPLC following silicagel column chromatography to yield single compound as white powder. The chemical structure of the compound was finally elucidated to be 4,4'-dihydroxy-3,3'-dimethoxylignan from the spectral data of FAB-MS. $^1H-\;and\;^{13}C-NMR$ spectrometries. The compound was also shown to have relatively strong antibacterial activity against ten types of cariogenic oral bacteria and one kind of Actinomyces sp.

• Korean Chemical Engineering Research
• /
• v.58 no.1
• /
• pp.44-51
• /
• 2020

The basic catalyst 1-benzyl-3-methyl-imidazolium hexafluoroantimonate (BMH) was synthesized and analyzed by FT-IR and ¹H-NMR. A crystalized biphenyl-based epoxy was synthesized by using tetramethyl biphenol (TMBP) and epichlorohdrine. In order to consider the curing tendency of the synthesized BMH, the mass ratio was changed to 0.5, 1.0, 2.0 wt.% under heated conditions and the curing tendency was analyzed by differential scanning calorimeter (DSC). As a result, the BMH catalyst showed a fast curing result in the stepwise heating pr℃ess of the biphenol-A epoxy and the cationic polymer. From these results, the BMH catalyst showed excellent thermal stability as a potential heat curing catalyst. In addition, we considered the application possibility of epoxy molding compound (EMC) which required a skeleton structure and a high heat resistance because the synthesized biphenyl epoxy had a characteristic of rapidly lowering viscosity at a constant temperature and a rigid skeleton structure of biphenol. As a result, it was confirmed that the TMBP-based epoxy developed in this study was composed of a crystalline structure, and a curing reaction was observed with a Novolac resin at a high temperature. In the presence of a catalyst, a curing reaction was observed around 150 ℃ and thus TMBP-based epoxy was successfully applied as a raw material of EMC.