• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.7C
• /
• pp.712-722
• /
• 2002

We have investigated a novel optical decoder for a fiber-optic code division multiple access(CDMA) communication systems. The conventional optical encoder and decoder have the advantage of simple structure. However the number of users in the system is limited by the auto- and cross-correlation properties generated in decoding process. In previous studies, to improve the system performance, although they used an optical code that minimize the sidelobe and cross-correlation, could not yet find a novel methods for performance improvement in fiber-optic CDMA system. Thus, it is necessary to investigate the novel optical decode in order to improve the performance of system. In this paper, we schematize the AND gate logic element(AGLE) composed with 1$\times$2 or 1$\times$3 coupler and the optical thyristor and propose the novel optical decoder using K(weight) AGLE. The optical thyristor only passes the overlapped signal and clips other signals. Such a novel concept means that the optical thyristor can operate as a hard-limiter. We analyze the fiber-optic CDMA system using the novel optical decoder with simulation and is found that the novel optical decoder using the AGLE and optical thyristor excludes the sidelobe and cross-correlation intensity between any two sequences.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.37 no.1
• /
• pp.53-59
• /
• 2000

We propose a modified nonlinear fiber optic interferometer which can serve to generate binary optical pulse sequences for CDMA networks, and to decode them. In one arm cross-phase modulation between a CW signal and a counter- or copropagating high-power pulse takes place in sequences of segment connected via VDM couplers. Preliminary experimental results on code generation as well as autocorrelation and crosscorrelation are presented, using Sagnac interferometer. As we expected, the experimental results show that the outputs of the interferometer device are not summed simply on the basis of power, but the sin-squared version of it. Arbitrary codes can in principle be implemented.

• The Korean Society of Law and Medicine
• /
• v.24 no.1
• /
• pp.131-155
• /
• 2023

Medical act divides unlicensed medical practice into medical practice by non-medical practitioners and unlicensed practice by medical practitioners. In the past, it was a common approach to strictly distinguish between western and Korean medicine, but the Supreme Court's Decision of December 22, 2016, Do. 21314, provided a new direction regarding the criteria for determining whether a Korean medicine practitioner is acting outside license. This paper analyzes the new criteria in detail, examines the significance of the new criteria, and explores its impact on the dualistic medical system. The difference between the new criteria and the previous criteria in the precedents is that the judgment is not based on the connection between Korean medicine principles and Western medicine principles. It is an advanced standard that actively accepts the overlap and variability of medical practice, moving away from dichotomous thinking that exclusively distinguishes between Korean medicine and Western medicine.

• Proceedings of the KIPE Conference
• /
• 2014.11a
• /
• pp.48-49
• /
• 2014

본 논문에서는 4권선 변압기를 이용하여 멀티레벨 운전을 하는 새로운 결선 방식을 제안하였다. 일종의 개방형 권선 구조의 확장으로서, 동일한 하드웨어에서 결선만 바꿈으로써 2차단 권선에 인가되는 전압의 레벨 수를 늘릴 수 있다. 본 논문에서는 제안된 결선 방식에 대한 등가회로를 중첩원리를 이용하여 유도하였다. 제안된 결선 방식을 3개의 델타 결선된 권선에 적용하면, 2레벨 인버터를 사용하더라도 1개 권선의 전압을 합성하는 데 6개의 스위칭 상태가 관여하게 되어 권선 전압의 레벨수를 9개까지 늘일 수 있다. 제안된 회로의 등가회로를 도출하고 모의실험을 통해 등가회로의 타당성을 검증하였다.

• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.207-208
• /
• 2015

최근 HVDC의 설치가 증가하면서 HVDC 컨버터에 의한 고조파가 계통에 영향을 끼치고 있다. 고조파는 전압 왜곡, 손실 증가, 과열 등의 문제를 야기하므로 고조파 필터를 통해 제거되어야 한다. 효율적인 고조파 필터 설계를 위해서는 계통의 고조파 임피던스에 대한 분석이 필요하다. 본 논문에서는 PSS/E에 내장된 IPLAN 프로그램을 사용하여 계통의 고조파 임피던스 특성을 분석하였다. 계통 요소의 모델링은 집중 부하모델 4와 과도 리액턴스 발전기 모델을 사용하였다. 중첩 원리를 이용하여 PSS/E에 내장된 IEEE 25모선에서 1차 고조파에서 70차 고조파까지의 고조파 차수 변화에 대한 계통 임피던스를 계산하였다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.9 no.5
• /
• pp.660-667
• /
• 1998

In this paper, we used differential amplifiers to reduce crosstalk in a wireless in-house optical interconnection in which two channel beams are overlapped. Experimental results show that environmental optical noise is also reduced using the same principle. This method is realized very easily with differential amplifiers without any optical filters or electrical filters. It is very useful in short distance optical interconnections.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.14 no.1
• /
• pp.39-48
• /
• 1994

An equivalent homogeneous 3-D linear composite analysis and accomponying finite element program is presented for elastomeric bearings. This study is limited to the 3-D layered system with linear, elastic, isoparametric small deformation. And we used method of multiscale to model the 3-dimensional configurations and overall response of the layered elastomeric bearings with global and local coordinates. The primary dependent variables for the theory have been selected that require only $C_o$ continuity of the finite element analysis. As a result, it is very simple and computationally economical. The presented theory can also be applied easily to the analysis of nonlinear behavior of layered systems. And those of past are not applicable to nonlinear analysis, because it uses superposition theory. Numerical examples are presented to verify the theory and to illustrate potential applications of the analysis.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.29 no.6
• /
• pp.449-456
• /
• 2018

Herein, several multibeam forming methods that can be applied to microwave wireless power transmission are presented. Because the conventional multibeam forming methods do not consider an active element pattern(AEP), an intended beam shape will contain a steering angle error when applied to an actual system. To solve this problem, a method of considering the average of the AEP and a method of considering all the AEPs by the modified Fourier series method have been proposed. We confirmed that the proposed method reduces the error with the intended beam shape in the multibeam formation. In addition, for the side lobe level(SLL) and null control, a method of multibeam forming by applying the superposition principle to the Dolph-Tschebyscheff method is proposed. We also confirmed that SLL control can be simultaneously achieved with the multibeam formation.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.11
• /
• pp.1272-1280
• /
• 2008

In this paper, we have proposed a phase noise model of fast frequency hopping synthesizer with DDS Driven PLL architecture. To accurately model the phase noise contribution of noise sources in frequency hopping synthesizer, they were investigated using model of digital divider for PLL, DAC for DDS and Leeson's model for reference oscillator and VCO. Especially it was proposed that the noise component of low pass filter was considered together with the phase noise of VCO. Under assuming linear operation of a phase locked loop, the phase noise transfer functions from noise sources to the output of synthesizer was analyzed by superposition theory. The proposed phase noise prediction model was evaluated and its results were compared with measured data.

• The Journal of the Korea Contents Association
• /
• v.7 no.1
• /
• pp.124-130
• /
• 2007

A rectangular coaxial line is mainly utilized as a transition structure from a coaxial line to a rectangular waveguide. A TEM cell is also widely used to measure the EMC characteristics of a DUT. In order to understand the operations of a rectangular coaxial line and a TEM cell, it is essential to analyze the dispersion relations of a rectangular coaxial line and a TEM cell. In this paper, we present simple yet accurate dispersion relations of the TE and TM higher modes based on the TEM mode. Manipulating a mode-matching technique and a Green's function approach allows us to obtain the analytic dispersion equations of a rectangular coaxial line and a TEM cell. In our approach, a rectangular coaxial line is divided into four L-blocks and its electromagnetic fields representations are easily obtained with a superposition. To verify the convergence of our dispersion relations, we perform numerical computations and compare our results with those of FDTD.