• 제목/요약/키워드: 중진공

검색결과 51건 처리시간 0.026초

중진대의 지진환경하에서 내풍설계된 초고층 철골조 중심가새골조의 지진응답해석 및 내진성능평가 (Seismic Response Analysis and Performance Evaluation of Wind-Designed Concentrically Braced Steel Highrise Buildings under Moderate Seismicity)

  • 이철호;김선웅
    • 한국지진공학회논문집
    • /
    • 제9권1호통권41호
    • /
    • pp.33-42
    • /
    • 2005
  • 국내와 같이 풍하중이 지배 횡하중으로 작용하는 중/약진대라 할지라도 초고층건물의 설계를 담당하고 있는 구조기술자는 특정세기의 잠재지진(가령 재래기 500년 정도의 설계용지진동 또는 재래기 2400년 정도의 최대한도지진)이 구조시스템에 미칠 수 있는 구조적 영향을 합리적으로 평가할 수 있어야 한다. 본 연구에서는 중/약진대로 분류되는 국내의 지진환경하에서, 국내 구조사무소의 평균적 실무관행에 따라 내풍설계된 초고층 철골중심가새골조를 가정하여 지진해석을 수행하고 내진성능을 평가하였다. 내풍설계에서 요구되는 사용성 요건 및 횡력저항 철골부재에 부과돠는 폭-두께비 제한 등으로 인해 상당한 크기의 시스템 초과강도(system overstrength)가 유입됨을 확인할 수 있었다. 내풍설계과정에서 부차적으로 기인하는 이 시스템 초과강도로 인하여, 본 연구의 세장비 6 이상의 철골조 초고층 중심가새골조는 2400년 재래기의 최대한도지진에 대해서도 즉시입주 가능한 거동수준에서 탄성적으로 저항할 수 있음을 확인하였다.

중진지역에 적합한 액상화 평가 생략기준 및 지진규모 보정계수에 관한 연구 (A Study on Magnitude Scaling Factors and Screening Limits of Liquefaction Potential Assessment in Moderate Earthquake Regions)

  • 박근보;박영근;최재순;김수일
    • 한국지반공학회논문집
    • /
    • 제20권7호
    • /
    • pp.127-140
    • /
    • 2004
  • 기존의 액상화 평가법은 대부분 미국, 일본, 그리고 유럽과 같이 지진 발생빈도가 높고 그로 인한 액상화 피해가 빈번한 국가에서 주도적으로 연구되어왔다. 이런 지역적 특성을 토대로 개발된 액상화 평가방법들은 높은 지진규모(M=7.5)에 바탕을 두고 있다. 국내의 경우, 1997년 실제적인 내진 연구가 시작된 이래 액상화 평가의 구체적 규정은 항만시설의 내진설계 표준서(1999)에 언급된 바 있으나 이는 문헌연구를 통해 제시된 것으로 실제적이지 못하다. 그러므로, 국내 적합한 설계기준을 작성하기 위해서는 지진피해자료의 부족을 국내 지반을 대상으로 한 동적실내시험을 통하는 것이 바람직하며, 일반적인 정현하중 진동시험 보다 실제 지진하중 재하 시험이 훨씬 효과적일 수 있다. 본 연구에서는 실제 지진파 고유의 특성을 적용한 진동삼축 시험을 통하여 상대밀도와 세립분함유량의 변화에 따른 액상화 저항강도를 산정하였다. 실험결과를 국내의 대표적인 항만지역의 지진응답 해석 결과와 비교 분석하고 중진지역에 적합한 액상화 평가의 생략기준을 제시하였다. 또한 실제 지진하중 삼축실험 결과를 이용하여 국내 여건에 적합한 지진규모 보정계수를 제안하였다.

청년창업기업의 창업초기 생존전략 : 중진공 청년전용자금 활용기업 사례 (Youth Startup Firms: A Case Study on the Survival Strategy for Creating Business Performance)

  • 이승창;임원호;서응교
    • 유통과학연구
    • /
    • 제12권6호
    • /
    • pp.81-88
    • /
    • 2014
  • Purpose - Entrepreneurship promotion is emerging as an important economic growth agenda. However, in Korea, entrepreneurship has weakened because of the collapse of the venture bubbles of the 2000s and the global economic recession in 2008, which have induced the business community to choose stability over risk. The Korean government has been implementing several support projects to inspire and promote youth entrepreneurship through various means including financial assistance; however, the perpetuation rate of young entrepreneurship is still low as compared to advanced economies such as the US and EU. This case study focuses on the Youth Start-Up Business Support Program of the Small & Medium Business Corporation, and explores practical alternatives. Further, it aims to suggest managerial factors and a conceptual model for change management factors affecting the business performance creation of a startup company, based on the Small and medium Business Corporation's young venture startup fund. Research design, data, and methodology - Many studies examine the current progress and issues of startup firms, for example, a lack of systematic cultivation of entrepreneurship and startup business training, lack of commercialization funding for youth startup businesses, lack of mentoring, and inadequate infrastructure. From prior research, we address four factors, namely, personal managerial capabilities, innovative business model, sufficient cash flow, and social network, affecting startup companies' business performance. This study involved a sample survey of 200 young entrepreneurs to investigate casual relations between the four factors and business performance. A regression analysis was used to verify the hypotheses. Results - First, in relation to differences in the founder's personal characteristics, age, sales amount, and number of employees significantly impact business performance. Second, regarding the causal relation between the four factors for creating business performance, an innovative business model and social networking have supported the hypotheses, revealing that the more that a start-up founder has an innovative business model and social networking, the more the start-up firms are likely to have better performance (e.g., sales volume, employment, ROE, ROI, etc.). Although the founder's competency and sufficient cash flow have no significant relationship with business performance, the mean value was higher performance for high founder's competency and sufficient cash flow. Conclusions - This study provides basic data on policy support strategies of the Small and Medium Business Corporation, to help young entrepreneurs achieve their start-up business goals. It shows that young entrepreneurship startup firms should strive to explore ideas to satisfy customers' needs, and that changes in customer value and the continuous innovation of business model differentiation are required to actively respond to change management. Moreover, at the infant startup stage, they should activate social network programs to share information, thereby offsetting resource scarcity and managing business risk. Further, the establishment of a long-term vision and the implementation of training programs in related specific fields should be supported to strengthen founders' personal capabilities.

국내 지진규모를 고려한 중진 지역에서의 액상화 평가방법에 관한 연구 (A Study on Liquefaction Assessment of Moderate Earthquake Region concerning Earthquake Magnitude of Korea)

  • 김수일;박근보;박성용;서경범
    • 한국지진공학회논문집
    • /
    • 제10권3호
    • /
    • pp.125-134
    • /
    • 2006
  • 기존의 액상화 평가방법은 대부분 미국, 일본 등 지진 발생빈도가 높고 그로 인한 액상화 피해가 빈번한 국가에서 주도적으로 연구가 진행되었으며, 개발된 액상화 평가방법들은 큰 지진규모(M=7.5)에 기초하고 있다. 국내에서도 1997년 실제적인 내진연구가 시작된 이래 액상화 평가의 구체적 규정이 제정되었으나, 내진설계기준에서는 실지진하중을 등가의 전단응력으로 간편화한 경험적인 방법과 실내진동실험에 의한 액상화 상세평가 방법을 통해 액상화 평가를 수행하도록 되어있다. 그러나 이러한 경우 실제 지진하중의 특성을 평가과정에서 반영하지 못하는 문제점이 있다. 본 연구에서는 이러한 문제점을 개선하기 위하여 실제 지진파 고유의 특성을 적용한 진동삼축실험을 통하여 상대밀도와 실트질함유량의 변화에 따른 액상화 저항강도를 산정하였다. 실험결과를 토대로 국내의 대표적인 항만지역의 지진응답해석 결과와 비교 분석하여 중진지역에 적합한 액상화 평가 생략기준을 제시하였다. 또한 액상화 평가시 정현하중 사용의 문제점을 개선하기 위하여 쐐기하중 및 선형증가쐐기하중 실험을 수행하여 하중 변화에 따른 액상화 저항강도 특성을 분석하였다.

진공시스템 성능에 대한 설계인자 영향 전산모사 (Simulation of Design Factor Effects on Performance of Vacuum System)

  • 김형택;정광필
    • 한국진공학회지
    • /
    • 제16권6호
    • /
    • pp.405-413
    • /
    • 2007
  • 진공시스템 최적화 설계를 위한 시스템 성능에 대한 설계인자 영향이 전산모사로 연구되었다. 본 연구로 상업화 전산모사기인 $VacSim^{Multi}$에 의한 진공시스템 모델링기구가 제시되었으며 진공시스템의 진공생성기구인 펌핑계 설계인자의 영향을 평가하여 향후 여러 설계인자들의 전산모사 연구 가능성이 확인되었다. $VacSim^{Multi}$의 저진공펌프 모델 전산모사 결과와 펌프사양에 의한 배기거동이 오차범위로 일치하였으며 부스터펌프의 사용이 중진공영역 응용에 효과적인 것으로 확인되었다. 또한 자체 배기능력이 없는 유확산펌프와 터보분자펌프 배기계의 최적화보조펌프 조합이 제시되었으며, 유확산 및 터보분자펌프 배기계의 시스템 공정응용특성도 확인되었다.

일반강도 및 고강도 재료를 사용한 보-기둥 접합부의 지진응답 (Seismic Response of Exterior Beam-Column Subassemblies Using Normal and High-Strength Materials)

  • 장극관;서대원
    • 한국지진공학회논문집
    • /
    • 제3권4호
    • /
    • pp.83-94
    • /
    • 1999
  • 고강도 콘크리트는 부재의 내력증가 뿐만아니라 내구성을 증대시키기 때문에 널리 사용되고 있다 그러나 고강도 철근콘크리트 보-기둥 접합부의 구조성능에 관한 연구자료는 충분하지 않은 실정이며 현행규준 또는 일반강도 콘크리트의 실험에 근거하고 있다 따라서 본 연구에서는 일반강도 $(f_c'=240kg/\textrm{cm}^2) 및 고강도(f_c'=700kg/\textrm{cm}^2)$ 콘크리트를 사용하여 실제의 중진지역 30층 실제구조물의 2/3크기를 축소한 보와 기둥 슬래브로 구성된 네 개의 부분구조체를 제작하여 유사정적실험을 통한 구조거동과 파괴형태를 조사하고 전단내력에 대한 현행규준과 비교 검토하였다.

  • PDF

중진지역 건축물의 묻힌온통기초에 작용하는 토압과 말 뚝변위에 대한 지진해석 (Seismic Analyses of Soil Pressure against Embedded Mat Foundation and Pile Displacements for a Building in Moderate Seismic Area)

  • 김용석
    • 한국지진공학회논문집
    • /
    • 제21권1호
    • /
    • pp.69-76
    • /
    • 2017
  • Seismic analyses of a pile under a large rigid basement foundation embedded in the homogeneous soil layer were performed practically by a response displacement method assuming a sinusoidal wave form. However, it is hard to take into account the characteristics of a large mat foundation and a heterogeneous soil layer with the response displacement method. The response displacement method is relevant to the 2D problems for longitudinal structures such as tunnel, underground cave structure, etc., but might not be relevant with isolated foundations for building structures. In this study, seismic pile analysis by a pseudo 3D finite element method was carried out to compare numerical results with results of the response displacement method considering 3D characteristics of a foundation-soil system which is important for the building foundation analyses. Study results show that seismic analyses results of a response displacement method are similar to those of a pseudo 3D numerical method for stiff and dense soil layers, but they are too conservative for a soft soil layer inducing large soil pressures on the foundation wall and large pile displacements due to ignored foundation rigidity and resistance.

피복관 프레팅마모 해석을 위한 LuGre 마찰모델 성능 고찰 (Vibration Simulation Using LuGre Friction Model for Cladding Tube Fretting Wear Analysis)

  • 박남규;김진선;김중진;김재익
    • 한국소음진동공학회논문집
    • /
    • 제26권1호
    • /
    • pp.55-62
    • /
    • 2016
  • Nuclear fuels are always exposed to hot temperature and high speed coolant flow during the reactor operation. Thus the fuel rod accompanies small amplitude vibration due to the turbulent flow. The random vibration causes friction between the fuel rod and the grid structure which provides the lateral supports. The friction is critical to the fuel rod fretting wear, and it degrades fuel performance when a severe wear is developed. LuGre friction model is introduced in the paper, and the performance was evaluated comparing to the classical Coulomb model. It is shown that the developed friction force considering the Coulomb friction is not enough to stop or delay the motion while the stick-slip can be simulated using LuGre friction model. Numerical solutions of the two dimensional spacer grid cell model with the modern friction are also reviewed, and it is discussed that the new friction model simulates well the nonlinear mechanism.

비접촉 겹침 이음된 프리캐스트 U형 보의 휨성능에 미치는 효과 (Effect of Flexural Performance on U-Shaped Precast Concrete Beams with Noncontact Lapped Splice)

  • 하상수;김승훈
    • 한국구조물진단유지관리공학회 논문집
    • /
    • 제12권6호
    • /
    • pp.119-128
    • /
    • 2008
  • 본 연구는 중진지역에서의 PC(precast conctete) 보-기둥 접합부의 새로운 모멘트-저항 시스템을 제안하는 것이다. 철근 이음형 접합부에서 연결재는 접합부를 관통하고, U형 하프 PC 보의 하부철근과 비접촉 겹칩이음으로 연결되어 있다. 비접촉 겹침이음에 대한 성능을 파악하기 위하여 실험적 연구와 해석적 연구가 수행되었다. 실험의 주요변수는 겹침길이, 연결재의 크기, 그리고 겹침이음된 연결재의 거리 등이다. 또한, 균열양상, 하중-변위 곡선, 내력 비교, 그리고 연결재의 변형 등에 초점을 맞추어 해석적 연구를 수행하여 실험결과와 비교하였다. 해석과 실험 결과 주요변수인 겹침길이, 연결재의 크기, 연결재의 비접촉 수직 거리등에 따라 강도, 연성, 그리고 접합부 거동에 큰 영향을 주는 것으로 나타났다.

현장 사례를 통한 PSM 공법의 생산성 향상 방안에 관한 연구 (A Study on Productivity Improvement Scheme Through Site Case Study In PSM)

  • 이태식;이원용;김길홍
    • 한국건설관리학회:학술대회논문집
    • /
    • 한국건설관리학회 2001년도 학술대회지
    • /
    • pp.541-544
    • /
    • 2001
  • 본 연구는 경부고속철도 공사에 처음으로 적용한 PSM 공법의 현장사례 분석을 통하여 생산성 향상 방안을 모색하였다. 본 사례현장의 경우 생산성에 영향을 많이 미치는 요인으로는 기능공의 숙련도 미숙, 장비운영관리 미흡 동절기 콘크리트 양생 조건 등을 발견하였다. 따라서 생산성을 향상시키는 방안으로 기능공들의 숙련도 중진, 생산성 향상을 위한 인센티브제도의 도입, 관계자간의 긴밀한 협조, 조직적인 팀웍, 생산적인 작업 여건 조성 둥을 제시하였다. 이외에도 생산성 향상을 위한 방안으로는 수행한 작업에 대한 철저한 피드백으로 작업방법의 지속적인 개선, 현장여건에 맞는 지속적인 교육훈련 등이 필요하다. 이러한 생산성 향상 방안을 활용하여 향후 적용될 공사에 있어 PSM공법의 장점을 최대한 살려, 성공적인 공사 수행을 도모하고자 한다.

  • PDF