• The Journal of Engineering Geology
• /
• v.29 no.3
• /
• pp.223-236
• /
• 2019

Resistivity surveys can identify the distribution of geological units and structures (including fragmented fault zones), the extent of weathered and modified geological strata, and the characteristics of groundwater. This study aims to analyze the underground sedimentary layers and geological structures near the Nari and Albong Basins of Ulleung-do, Korea, focusing on six survey lines to identify the spatial trends in subsurface resistivity. A modified dipole array method (D method) was employed, combining resistivity results obtained by existing dipole array methods (A and C methods). The modified method provides optimal analysis of the cross-section of underground resistivity, and shows a clear boundary between a low-resistivity zone (${\leq}500{\Omega}{\cdot}m$) of sedimentary layers and weak zones, and a high-resistivity zone (${\geq}5,000{\Omega}{\cdot}m$) of volcanic rock (trachyandesite). The estimated average thickness of the sedimentary layers is 50~100 m for the Albong Basin and 100~200 m for the Nari Basin. An anomaly zone, different from the weak zone in the bedrock, is identified as a caldera fault, and the low-resistivity zone extends from the surface down to the lowest survey depths.

• The Journal of Engineering Geology
• /
• v.29 no.3
• /
• pp.265-277
• /
• 2019

Changes in the amount, intensity, frequency, and type of precipitation, in conjunction with global warming and climate change, critically impact groundwater recharge and associated groundwater level fluctuations. Monthly gravity levels by the Gravity Recovery and Climate Experiment (GRACE) are acquired to monitor total water storage changes at regional and global scales. However, there are inherent difficulties in quantitatively relating the GRACE observations to groundwater level data due to the difficulties in spatially representing groundwater levels. Here three local interpolation methods (kriging, inverse distance weighted, and natural neighbor) were implemented to estimate the areal distribution of groundwater recharge changes in South Korea during the 2002-2016 period. The interpolated monthly groundwater recharge changes are compared with the GRACE-derived groundwater storage changes. There is a weak decrease in the groundwater recharge changes over time in both the GRACE observations and groundwater measurements, with the rate of groundwater recharge change exhibiting mean and median values of -0.01 and -0.02 cm/month, respectively.

• Journal of Broadcast Engineering
• /
• v.24 no.5
• /
• pp.713-725
• /
• 2019

Automatic License Plate Recognition (ALPR) is a technology required for many applications such as Intelligent Transportation Systems and Video Surveillance Systems. Most of the studies have studied were about the detection and recognition of license plates on cars, and there is very little about detecting and recognizing license plates on motorbikes. In the case of a car, the license plate is located at the front or rear center of the vehicle and is a straight or slightly sloped license plate. Also, the background of the license plate is mainly monochromatic, and license plate detection and recognition process is less complicated. However since the motorbike is parked by using a kickstand, it is inclined at various angles when parked, so the process of recognizing characters on the motorbike license plate is more complicated. In this paper, we have developed a 2-stage YOLOv2 algorithm to detect the area of a license plate after detection of a motorbike area in order to improve the recognition accuracy of license plate for motorbike data set parked at various angles. In order to increase the detection rate, the size and number of the anchor boxes were adjusted according to the characteristics of the motorbike and license plate. Image warping algorithms were applied after detecting tilted license plates. As a result of simulating the license plate character recognition process, the proposed method had the recognition rate of license plate of 80.23% compared to the recognition rate of the conventional method(YOLOv2 without image warping) of 47.74%. Therefore, the proposed method can increase the recognition of tilted motorbike license plate character by using the adjustment of anchor boxes and the image warping which fit the motorbike license plate.

• Journal of Aerospace System Engineering
• /
• v.14 no.3
• /
• pp.42-50
• /
• 2020

For calibration of the non-uniformity characteristics of the space-borne infrared (IR) sensor, a black body system shall provide estimated representative surface temperature at various reference temperatures by using the limited number of temperature sensors. The black body system proposed in this study has an I/F flange integrated on the rear side of the black body for installation of the heat pipe to transfer the residual heat after the black body heat-up. This design allows for obtaining a circular symmetric thermal contour of black body with low surface temperature gradient, leading to much easier representative temperature estimation. Additionally, this provides mechanically stable thermal I/F under launch and on-orbit environmental loads, as well as allowing a fail safe design by using the two heat pipes. Also, a highly accurate temperature estimation is possible even if the temperature sensors are attached on the surface on the rear side of the black body. The effectiveness of the thermal design of the proposed black body has been verified through the on-orbit thermal analysis. Based on the results, the representative surface temperature was estimated according to the number and position of the temperature sensors.

• The Journal of Engineering Geology
• /
• v.31 no.3
• /
• pp.395-432
• /
• 2021

Groundwater recharge rates vary widely by location and with time. They are difficult to measure directly and are thus often estimated using simulations. This study employed frequency and regression analysis and a classification and regression tree (CART) algorithm in a machine learning method to estimate groundwater recharge. CART algorithms are considered for the distribution of precipitation by subbasin (PCP), geomorphological data, indices of the relationship between vegetation and landuse, and soil type. The considered geomorphological data were digital elevaion model (DEM), surface slope (SLOP), surface aspect (ASPT), and indices were the perpendicular vegetation index (PVI), normalized difference vegetation index (NDVI), normalized difference tillage index (NDTI), normalized difference residue index (NDRI). The spatio-temperal distribution of groundwater recharge in the SWAT-MOD-FLOW program, was classified as group 4, run in R, sampled for random and a model trained its groundwater recharge was predicted by CART condidering modified PVI, NDVI, NDTI, NDRI, PCP, and geomorphological data. To assess inter-rater reliability for group 4 groundwater recharge, the Kappa coefficient and overall accuracy and confusion matrix using K-fold cross-validation were calculated. The model obtained a Kappa coefficient of 0.3-0.6 and an overall accuracy of 0.5-0.7, indicating that the proposed model for estimating groundwater recharge with respect to soil type and vegetation cover is quite reliable.

• Food Engineering Progress
• /
• v.15 no.3
• /
• pp.230-234
• /
• 2011

The objective of this study was to optimize the thermal condition and determine the shelf life of heated Chunbokjang product. The optimum thermal condition of heated Chunbok-jang product was determined by sensory test, and heat penetration curve was obtained by Thermal Microprocessor. Sterilization time was a 21~23 min until $F_0$ value reached 9 min, depending upon the number of abalone. As solid content was reduced and temperature of sterilization was increased, the thermal death time was decreased. The score of sensory test indicated that there was no significant difference in flavor of heated Chunbok-jang product made at different sterilization temperatures (110, 121.1, 125, and $130^{\circ}C$). Heated Chunbok-jang product, however, sterilized at $125^{\circ}C$ showed the highest score in texture and taste values. Salinity and pH were not changed during seven month storages, but texture became firmer, and any microorganism had not been detected from the heated chunbok-jang product during these periods. As a result of storage experiment, the shelf-life of heated Chunbok-jang product was 3-month at room temperature.

• Food Engineering Progress
• /
• v.14 no.2
• /
• pp.112-117
• /
• 2010

Black ginger, obtained from steaming and drying process, provides the various functional properties. This study was performed to investigate the optimum processing conditions for black ginger with high content of biologically active substance such as anti-oxidations. Optimum processing conditions such as temperature and time for black ginger was determined by response surface methodology (RSM) with manufacturing process and functionality. The optimum steaming condition was determined 6 hours at 93.2$^{\circ}C$, and 82.7 mg/L DPPH scavenging activities was obtained at this condition. The black ginger drink was made with black ginger extracts, Japanese apricot, and honey. Interaction effects of these ingredients were investigated by modified distance based on design and analyzed by linear, nonlinear regression model, and RSM. The optimization of mixture ratio was made by statistical modeling using DPPH scavenging activities and sensory properties which are the important target constraints in drink. Total flavonoids showed a linear canonical form, while preference and antiradical activity showed a nonlinear canonical form indicating the higher interaction among mixtures. The response trace plot revealed that antiradical activity, sensory properties and total flavonoids were quite sensitive to the drink blending. The optimum formulation of the drink was set at 14.2% of black ginger extracts, 5% of Japanese apricot, and 10.8% honey.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2019.04a
• /
• pp.109-109
• /
• 2019

2018년 5월 전라북도 남원군에서 재배하여 수확 후 $0^{\circ}C$ 저장고에서 예냉을 마친 산마늘을 사용하였으며 외 포장 상자는 골판지로 구성된 통기공이 없는 골판지상자 1kg용을 사용하였다. 골판지상자와 함께 내부 포장으로 사용하기 위한 내포장 필름은 $20{\mu}m$ 두께의 HDPE으로 된 필름 봉지, 흡습종이는 파라핀왁스 코팅 종이($32{\times}35cm$, 태영산업)를 이용하여 조합 처리하고 국내에서 개발한 기능성 필름2종으로 포장처리는 총 4가지로 (1) PE(관행) (2) PE+흡습지 (3) 기능성필름1($30{\times}58cm$, 기능성물질 1%+40,000OTR, 제조사: 신영산업사) (4) 기능성필름2($30{\times}58cm$, Key fresh, 제조사: 씨앤케이프로팩(주)) 각 처리당 1kg 씩의 산마늘 잎을 포장하였다. 실험은 포장 처리 후 상온상태로 전북 완주군 실험실까지 수송하였으며 실험실 도착 후 상온 실험실에 두고 2일과 6일 후 중량감소율, 색도, 엽록소, 손실률 및 종합선도 등 품질특성 변화를 조사하였고 각 포장방법별 온도와 상대습도 변화를 보기 위하여 산마늘 잎이 포장된 상자 내부 중앙 부분에 디지털온습도기록계(SP-2000-20R)를 고정한 후 측정하였다. 대조구로 사용한 PE필름 단용으로 포장한 산마늘 잎은 상온저장 6일 경과 후 중량 소율이 1.7%, PE필름+신선지 처리는 1.0%, 기능성필름1과 기능성필름2는 거의 중량감소가 없어 1% 미만의 변화를 보였다. 산마늘 잎의 SPAD 값에 의한 엽록소 수치와 색도를 측정한 명도($L^*$)와 Hue angle 값의 변화는 기능성필름1과 기능성필름2가 유사하게 높게 유지되었고 반면에 PE필름은 저장 2일 후 부터 값이 감소하기 시작하여 6일 후 크게 감소하였다. 저장 6일 후 기능성필름1과 기능성필름2가 외관품위에서 높은 평가를 받아 상품성을 유지하고 있었으나 PE필름 처리와 PE필름+흡습지 처리는 상품성을 상실한 상태였다. 이러한 경향은 건전율에 있어서도 유사하였으며 기능성필름1(다공성 나노 물질이 혼입되어 있으며 산소투과율을 $40,000cc/m2{\cdot}day{\cdot}atm$으로 조성한 필름)이 상온저장 6일 후 상품성을 유지하는 건전율이 83%로 가장 높았다.

• 재활복지
• /
• v.20 no.1
• /
• pp.1-22
• /
• 2016

This research aimed to examine the problems in a current national emergency management system that does not consider the disabled in the face of manmade catastrophes and natural disasters, and to conduct an expert opinion survey to explore the direction of disabled-inclusive public disaster management system. As a result of the analysis, the respondents of the survey revealed a need for a designated government department for disaster management systems for the disabled and the experts preferred the Ministry of Public Safety and Security (50%) than the Ministry of Health and Welfare (37.5%). However, 12.5% of the surveyed experts perceived cooperation between the two Ministries, rather than selecting a certain ministry, as necessary to establish a disaster management system for the disabled. Additionally, the experts recognized the response period (43.8%) of the disaster management life cycle to be the most important phase. Thus, at the disaster response period, the experts suggested utilizing an emergency alarm system to effectively rescue the disabled in the face of disaster. Based on this discussion, the paper explores ways to establish a disabled-inclusive public disaster management system.

• Ecology and Resilient Infrastructure
• /
• v.5 no.4
• /
• pp.257-263
• /
• 2018

This study is to develop a GSTM (Green infrastructure Surface Temperature Measurment) equipment for reducing the surface temperature of GI by using LID Method. The tests were conducted including GI products such as Greening block, Pervious Block, Soil Block and so on. The GSTM equipment developed by considering the literature surveys are characterized as follows. The non-contact infrared temperature sensor was used to measure the surface temperature, and it was improved to measure the overall average temperature including the center and the corner temperature of the specimen. The developed GSTM equipment was used to compare performance of asphalt and GI products. As a result, the Greening Block show a high difference of $18.4^{\circ}C$ and it contributes to the decrease of surface temperature.