• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.1942_1943
• /
• 2009

무선통신 시스템의 소형화와 저가격, 고품질, 다기능 재료 및 첨단 가공 기술과 연계된 필터설계 및 제작 기술에 대한 연구가 활발히 진행 중이다. 그러나 무선통신 시스템은 주파수라는 한정된 자원을 사용하기 때문에 주파수 자원의 효율적 관리를 위한 규제나 방안이 필요하고. 이에 따라서 여러 가지 대책과 방안이 필요로 하고 있다. 그래서 필터의 성능개선을 위한 연구가 본질 적으로 중요하게 되었다. 본 논문은 체비세프(Chebyshev)필터와 버터워스(Butterworth)필터를 이용한 대역통과(band pass) 필터를 제안한다. 이 필터는 안정화된 통과대역과 빠른 주파수 응답을 얻기위해 6차 체비세프필터와 8차 버터워스필터를 결합 하였다. 측정된 대역통과 필터는, 차단 영역을 구분하는 스커트(skirt)특성은 날카롭게(sharp) 되었고 통과대역의 평탄도 또한 개선되어짐을 볼 수 있다. 제안된 필터의 중심주파수는 2.5GHz, 대역폭은 200MHz이고, 대역내 평탄도는 0.5dB, 경사도는 오차가 60dB일때 체비세프는 210MHz, 버터워스는 340MHz, 체비세프-버터워스는 290MHz가 되어 버터워스 보다 좋게 되었으며 극점의 배치도 안정적인 결과를 얻었다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.16 no.10 s.101
• /
• pp.1020-1027
• /
• 2005

In this paper, economic miniature RF transmitter module for intelligent transportation system(ITS) is described. This module which consists of ASK modulator, frequency synthesizer, power amplifier is operating at 5.8 GHz frequency band and implemented by using LTCC process technique. Thus, ultra small size of 0.8 CC and improved electrical performances has been obtained. From the test results, transmitting characteristics of 10 dBm ouput power and -46 dBc interchannel interference with 1.024 Mbps ASK modulated have been shown. Frequency synthesizer as a transmitting signal source reveals very short locking time of 26 usec and outstanding phase noise of -115 dBc/Hz at 1 MHz offset from 5.8 GHz center frequency.

• Proceedings of the Acoustical Society of Korea Conference
• /
• spring
• /
• pp.395-398
• /
• 1999

본 연구에서는 초음파현미경에서 다중의 동작주파스를 사용하여 얻어진 영상을 합성하여 깊이분해능이 개선된 초음파영상을 복원하는 방법을 연구하였다. 실험을 위하여 중심주파수가 5MHz이고 비대역폭이 $35\%$인 초음파변환기를 사용하여 초음파현미경을 구성하였다. 시편은 알루미늄을 이용하여 표면에 깊이가 $100{\mu}m$이고 지름이 2mm인 원형결함을 제작하였다. 실험결과, 동작주파수가 5MHz인 단일 주파수를 사용하여 얻어진 영상에서 결함이 존재하는 면과 그렇지 않은 면에 대한 콘트라스트가 0.098로 나타났다. 반면에 동작주파수를 $4.4MHz\~5.6MHz$ 범위에서 200kHz씩 변화시키면서 획득한 데이터를 합성하여 얻어진 영상에서 결함이 존재하는 면과 그러하지 않은 면에 대한 영상 콘트라스트가 0.398로 나타났다. 따라서 초음파현미경에서 다중의 동작주파수를 사용한 경우, 피사체의 깊이 변화에 대한 영상의 콘트라스트가 단일주파수를 사용한 경우에 비하여 개선되어 나타났으며 깊이분해능이 향상되었다. 앞으로의 과제는 초음파현미경에서 음향렌즈의 집속도 변화에 대한 적절한 동작주파수의 동작범위와 영상의 분해능과의 관계에 대한 연구가 계속되어져야 한다고 본다.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.9 no.5
• /
• pp.19-26
• /
• 1972

A newly developed quartz frequency modulator utili3ing a V. V. C. diode is briefly described. Its electrical characteristics-including modulation linearity, modulation distortion, and carrier frequency stability depending upon the variation of the environmental temperature and the applied power voltage, etc.-are suitable for the modulator of a mobile or a portable F.M. transmitter according to the experimental results. The excellent over-all electrical characteristics were proved from the experimental development of the two kinds of transceivers. One is the single channal transceiver which contains a direct frequency modulator at the carrier frequency of 52.750 MHg. The other is the dual channel transceiver (the frequencies are selected from about 40 channels without tuning adjustment) whose operational frequency is composed of a modulated frequency of 10.7 MHz and the frequency generated at a channel control oscillator, As mentioned above, it is realized that the electrical characteristics of this modulation method are suitable for portable F. M. transceivers.

• Korean Journal of Optics and Photonics
• /
• v.8 no.1
• /
• pp.68-72
• /
• 1997

Using one of the absorption lines of $^{13}C_2H_2$ molecules near the zero dispersion wavelength(1549.49nm) of dispersion shifted fiber, we stabilized center frequency of an optical fiber Fabry-Perot filter. The free spectral range of the filter is 100 GHz for 100 GHz channel allocation. For equi-spaced three channel multiplexing, channel locking of three DFB-LDs to transmission peaks of the fiber Fabry-Perot filter was tried. To investigate the effect of dithering current applied to each DFB-LD, the change of DFB-LD linewidth was measured.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.5
• /
• pp.3079-3085
• /
• 2014

This paper suggests a power level controllable frequency up-converter which is designed and fabricated using both the filtering technology consisted with only passive devices and a multi-level digital attenuator. The suggested frequency up-converter simultaneously realizes the low power consumption and the low cost model. Because of the possibility for controlling power levels, it is possible to use the suggested frequency up-converter for wide spectral range. According to the experimental results, the average gain value of 0.75dB is obtained for the bandwidth of 160MHz at the center frequency of 1,200MHz. Especially, it is confirmed that the power level can be controlled from 10 to -21.5dBm through the digital attenuator.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.1
• /
• pp.39-45
• /
• 2008

In this parer a branch type inverted-F structure antenna with dual-band is proposed. The proposed antenna has a size of about $70mm{\times}35mm{\times}0.8mm$ with a total mobile phone PCB for support and patch of about $12mm{\times}8mm{\times}0.8mm$. This antenna is designed to operate of frequency 2.45GHz and 5.8GHz, Bandwidth at each other frequency is satisfied $83MHz{\sim}100MHz$ in frequencies. Also, The designed and fabricated dual-band antenna for 2.45GHz, 5.8GHz have a gain between 2.0dBi and -1.0dBi at all bands.

• Journal of the Korea Society of Computer and Information
• /
• v.7 no.1
• /
• pp.94-102
• /
• 2002

In this paper, we present a forecasting model for the spectrum demand which will be used for the mid/long-term spectrum forecasting in Korea. In specific, we present the bottom-up model with considering the customer not the previous top-down method. The Proposed model consists of service definition. classification of service characteristics, drawing representative service characteristic , forecasting of service demand, mapping with spectrum resource, verification and spectrum forecasting. The carried actions in each step is described in detail. For the validation of the model an example for the PCS environments is shown. traverse stepping stones for a variety of legitimate reasons.

• The Journal of the Acoustical Society of Korea
• /
• v.28 no.1
• /
• pp.25-31
• /
• 2009

This paper introduces a spectrally formulated element method (SEM) for the beams treated with passive constrained layer damping (PCLD). The viscoelastic core of the beams has a complex modulus that varies with frequency. The SEM is formulated in the frequency domain using dynamic shape functions based on the exact displacement solutions from progressive wave methods, which implicitly account for the frequency-dependent complex modulus of the viscoelastic core. The frequency response function and dynamic responses obtained by the SEM and the conventional finite element method (CFEM) are compared to evaluate the validity and accuracy of the present spectral PCLD beam element model. The spectral PCLD beam element model is found to provide very reliable results when compared with the conventional finite element model.

• The Journal of the Acoustical Society of Korea
• /
• v.28 no.4
• /
• pp.336-342
• /
• 2009

A conventional Closest Point of Approach (CPA) analysis allows a non-maneuvering moving source that is radiating a constant frequency tone to be located using doppler shifted frequency measurements obtained by a stationary receiver. The original frequency, relative speed of the target, time at the CPA, and range from the CPA to the sensor are estimated by the conventional CPA. However, this paper proposes a new CPA analysis that allows the motion parameters of a target to be estimated using the bearing and frequency measurements obtained by a moving receiver that has a constant velocity. The validity of the proposed estimation scheme is confirmed through a performance analysis and simulation study.