• Korean Chemical Engineering Research
• /
• v.54 no.3
• /
• pp.315-319
• /
• 2016

This study examined the optimization of hot-water extraction conditions for maximizing the total polyphenol compounds (TPC) extracted from amaranth leaf. The effects of three independent variables, including extraction temperature, extraction time and ethanol concentration on TPC were investigated using central composite design (CCD). The concentration of TPC increased with increased levels of extraction temperature and time. The extraction temperature and the ethanol concentration showed the significant effect on TPC production (p<0.05). The predicted values at the optimized condition were acceptable when compared to the experimental values ($R^2=0.9566$). The optimum extraction conditions were as follows: temperature of $90.1^{\circ}C$, time of 50 min and ethanol concentration of 61.6% (v/v) for the maximum TPC of 12.6 mg GAE/g DM.

• Korean Journal of Environmental Biology
• /
• v.22 no.1
• /
• pp.192-199
• /
• 2004

The distribution of dinofagellate cysts in the top-3 cm surface sediment samples collected from the East China Sea around Jeju Island was investigated in 18 stations of the sea. Twenty-two different types of Dinoflagellate cysts were recorded in this study, among which Spiniferites bulloideus occupied a predominant species in most of all the stations. Dinoflagellate cyst concentration varied from 6 (st. B3) to 3,645 (st. A5) cysts $g^{-1}$, and generally increased toward the northern part of Jeju Island (Part 1) rather than the southern part (Part 2); in the former average value was 183 cysts $g^{-1}$, while that in the latter was 1,144 cysts$g^{-1}$. Compared with the other reports which investigated dinoflagellate cyst concentrations and distributions in the East China Sea, the results in this study showed very similar pattern to those.

• Journal of the Korean Magnetics Society
• /
• v.9 no.1
• /
• pp.7-16
• /
• 1999

Stoichiometric and nonstoichiometric $Y_{3-x}Fe_{5+x}O_{12})$ polycrystalline samples (x=0.00, 0.05, 0.10, 0.30, -0.05, -0.10, -0.30) were prepared by solid state reaction method. The magnetic properties of the sample were investigated by FMR (ferromagnetic resonance) technique at microwave frequency 5.11 GHz (G-band) and 23.39 GHz (K-band) respectively. The spectroscopic splitting factor g were estimated to be 2.04~2.35 from the derivative absorption lines. As the samples became yttrium $(Y^{3+})$ excess and iron $(Fe^{3+})$ excess, Magnetizations were decreased. But resonance linewidth were increased. To investigate the anisotropy, the angular dependence of resonance magnetic fields were measured. Angular dependence of effective magnetizations were measured by FMR from 77 K to 300 K at K-band microwave frequency (23.39 GHz) and the saturation magnetizations were measured by VSM. The Bloch coefficients B and C were determined by fitting. $M_{eff}(0)$ was obtained by the extrapolation from 80 K. From this result, the spin wave stiffness constant D $(about\; 162~206 \;eV{\AA}^2)$and average square range of exchange interaction $$$(about \;5.84~12.13\;{\AA}^2)$ were determined.

• 재활복지
• /
• v.21 no.1
• /
• pp.1-26
• /
• 2017

The main purpose of this paper is identifying the trends of researches in the realm of social welfare for disabled people. It tries to introduce an alternative analytic approach - key word network analysis - that might surpass the shortage of analysis methods of existing studies which have mainly relied on descriptive analysis. For this purpose the authors constructed a database composed of key words and informations about research methods of the data sources of this study. The sources are such researches as doctoral theses and the papers of Korean Journal of Social Welfare and Journal of Rehabilitation Research which were published during the 20 years from 1996 to 2015. Total numbers of the thesis or papers analysed at this study are 1,034. The results are shown in three ways as follows: First, the method trends of selected researches. Second the lists of interested types and population groups of the disabled persons and interested issues. Third, the intellectual structure of the research. Based on the findings of this study, some suggestions are given considering desirable directions of future researches in relation to perspectives, methods, targets and subjects of them.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.37 no.1
• /
• pp.43-53
• /
• 2011

The conditions in fluid-bed processor for nanoencapsulation of azelaic acid-milk nano powder for acne nanocosmetics were optimized by response surface methodology (RSM). The maximum value of yield was 70.97 %. The yield was appreciably influenced by inlet air temperature, atomizing pressure, and feeding speed. The particle size increased with an increase in the feeding speed and a decrease in the atomizing pressure. The elution rate in saline solutions was appreciably influenced by inlet air temperature and atomizing pressure. The moisture content increased with higher atomizing pressure, which was demonstrated to be similar to the nanoencapsulation characteristics related to water activity. The Hunter's L and b values increased with an increase in the inlet air temperature. The optimum conditions estimated by RSM for the maximized values of yield, moisture content, particle size and elution rate in skin suitability were $67{\sim}73^{\circ}C$ of inlet air temperature, 0.6 ~ 0.8 mL/min feeding speed and 1.8 ~ 2.0 kg/$cm^2$ of atomizing pressure, respectively. These estimated values were in agreement with those measured by real experiments.

• Korean Journal of Environmental Agriculture
• /
• v.21 no.2
• /
• pp.83-89
• /
• 2002

The effect of low dose $\gamma$ radiation on photosynthesis and the reduction of photoinhibition in red pepper plant was investigated. The seedling height leaf width and leaf length of pepper were stimulated in plants grown from seeds irradiated with the low dose of 4 Gy. The $O_2$ evolution in the 4 Gy irradiation group was 1.5 times greater than in the control. To investigate the effect of low dose $\gamma$ radiation on response to high light stress, photoinhibition was induced in leaves of pepper by illumination of high light (900 $\mu mol/m^2/s$). Pmax was decreased with increasing illumination time by 20% in the control, while hardly decreased in the 4 Gy irradiation group. The photochemical yield of PSII, estimated as Fv/Fm, was decreased with increasing illumination time by 50% after 4 hours while Fo did not change. However, Fv/Fm in the 4 Gy irradiation group was decreased by 37% of inhibition, indicating that the photoinhibition was decreased by the low dose $\gamma$ radiation. Changes in the effective quantum yield of PSII, $\Phi_{PSII}$, and 1/Fo-1/Fm, a measure of the rate constant of excitation trapping by the PSII reaction center, showed similar pattern to Fv/Fm. And NPQ was decreased after photoinhibitory treatment showing no difference between the control and the 4 Gy irradiation group. These results showed the positive effect of low dose $\gamma$ radiation on the seedling growth and the reduction of photoinhibition.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.06a
• /
• pp.18-18
• /
• 2007

지난 수년 동안 Sn-3.0Ag-0.5Cu 합금은 전자산업의 표준 무연솔더 조성으로 전자제품의 제작에 사용되어져 왔으며, 그 신뢰성도 충분히 검증되어 대표적인 무연 솔더 조성으로의 입지를 굳혀왔다. 그러나 전자제품의 mobile화에 따른 내충격 신뢰성에 대한 요구와 최근의 급격한 Ag 가격의 상승은 Ag 함량의 축소에 의한 원가절감을 요청하게 되었으며, 이에 따라 소량의 Ag를 함유하는 솔더 조성 개발에 대한 연구가 산업 현장을 중심으로 절실히 요청되고 있다. Sn-Ag-Cu의 3원계 함긍에서 Ag는 합금의 융점을 낮추고, 강도와 같은 합금의 기계적 특성을 증가시키는 한편, 모재에 대한 합금의 젖음성을 향상시키는데 필수적인 원소로 인식되고 있다. 따라서 Sn-Ag-Cu의 3원계 함금에서 Ag의 함량을 감소시키게 되면, 합금액 액상선 온도와 고상선 온도가 벌어져 pasty range(또는 mush zone)가 증가하게 되고, wettability도 감소하게 되어 솔더 합금으로서의 요구 특성을 많이 상실하게 된다. 또한 Ag 함량을 감소시키게 되면 합금의 elongation이 향상되면서 내 impact 수명이 향상되는 효과를 볼 수 있으나, 합금의 creep 특성 및 기계적인 강도는 감소하면서 열싸이클링 수명은 감소하는 경향을 나타내게 된다. 따라서 솔더 합금의 내 impact 수명과 열싸이클링 수명을 동시에 만족시키지 위해서는 Ag 함량을 최적화하기 위한 고려가 필요하며, 합금원소에 대한 연구가 요청된다고 하겠다. 한편 Ag의 함량을 3wt.% 이상으로 첨가할 경우에도 비교적 느린 응고 속도에서는 조대한 판상의 $Ag_3Sn$ 상을 형성하는 경향이 있어 외관 물량을 야기 시킬 가능성이 매우 커지는 현상도 보고되고 있다. 따라서 Ag의 첨가량을 최적화 하면서 솔더 재료로서의 특성을 계속적으로 유지하기 위해서는 제 4 원소의 함유가 필수적이라고 할 수 있다. 본 연구에서는 Sn-Ag-Cu계에 첨부하는 제 4원소로서 In을 선택하였다. 비록 In은 Ag보다 고가이기 때문에 산업적인 적용을 위한 솔더 합금 원소로는 거의 각광받지 못했으나, 본 연구의 결과로는 In은 매우 소량 첨가할 경우에도 Sn-Ag-Cu계 합금, 특히 소량의 Ag를 함유하는 Sn-Ag-Cu계 합금의 wettabilty와 기계적 특성 향상에 매우 효과적임을 알 수 있었다. 결론적으로 본 연구를 통해 구현된 Sn-Ag-Cu-In계 최적 솔더 조성의 경우 Sn-3.0Ag-0.5Cu의 표준 조성에 비하여 약 18%의 원자재 가격 절감을 도모할 수 있을 것으로 예상되는 한편. Sn-3.0Ag-0.5Cu에 유사하거나 우수한 wettability 특성을 나타내었고. Sn-1.0Ag-0.5Cu 또는 Sn-l.2Ag-0.5Cu-0.05Ni 조성보다는 월등히 우수한 wettability 특성을 나타내었다. 더구나 Sn-Ag-Cu-In계 최적 솔더 조성은 합금의 강도 저하는 최소화 시키면서 합금의 elongation은 극적으로 향상시켜 합금의 toughness 값이 매우 우수한 특성을 가짐을 알 수 있었다. 이렇게 우수한 toughness 값은 솔더 조인트의 대표적 신뢰성 요구 특성인 열싸이클링 수명과 내 impact 수명을 동시에 향상시킬 수 있을 것으로 예상된다. 요컨대 본 연구를 통해 구현된 Sn-Ag-Cu-In계 솔더 조성은 최적 솔더 조성에서 요구되는 4가지 인자, 즉, 저렴한 원재료 가격, 우수한 wettability 특성, 합금 자체의 높은 toughness, 안정하고 낮은 성장 속도의 계면 반응층 생성을 모두 만족시키는 특징을 가짐으로서 기존 무연솔더 조성의 새로운 대안으로 자리 잡을 것으로 기대된다.

• Food Science and Preservation
• /
• v.12 no.3
• /
• pp.209-215
• /
• 2005

Response surface methodology(RSM) was applied to monitor the elimination rate of heavy metals(Pb, Cd) and soluble solids depending on the steaming and roasting conditions of Polygonatum odoratum roots. Experiments of 16 different steaming and roasting conditions based on a central composite design for steaming time($60{\sim}180$ min), roasting temperature($110{\sim}150^{\circ}C$), and roasting time($10{\sim}50$ min) were conducted, thereby predicting the steaming and roasting conditions for the maximal responses; soluble solids($71.47\%$) at 65.24 min, $126.93^{\circ}C$ and 37.58 min; Pb removal rate($18.87\%$) at 71.23 min, $119.81^{\circ}C$ and 24.35 min; Cd removal rate($50,85\%$) at 160.89 min, $126.43^{\circ}C$ and 15.81 min, respectively. The optimum conditions estimated by RSM for the maximized values of soluble solids and heavy metal elimination rates were $165{\sim}180$ min of steaming time, $120{\sim}135^{\circ}C$ of roasting temperature, and $30{\sim}45$ min of roasting time, respectively. These estimated values were in agreement with those measured by real experiments.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.20 no.2
• /
• pp.214-227
• /
• 2018

An object oriented crop model was developed to perform crop growth simulation taking into account complex interaction between biotic and abiotic factors in an agricultural ecosystem. A set of classes including Atmosphere class, Plant class, Soil class, and Grower class were designed to represent weather, crop, soil, and crop management, respectively. Objects, which are instance of class, were linked to construct an integrated system for crop growth simulation. In a case study, yield of corn and soybean, which was obtained at an experiment farm in Rural Development Administration from 1984 to 1986, were compared with yield simulated using the integrated system. The integrated system had relatively low error rate of corn yield, e.g., <4%, under sole and intercropping conditions. In contrast, the system had a relatively large underestimation error for above ground biomass except for grain compared with those observed for corn and soybean. For example, estimates of biomass of corn leaf and stem was 31% lower than those of observed values. Although the integrated system consisted of simple models, the system was capable of simulating crop yield under an intercropping condition. This result suggested that an existing process-based model would be used to have more realistic simulation of crop growth once it is reengineered to be compatible to the integration system, which merits further studies for crop model improvement and implementation in object oriented paradigm.

• Journal of Korea Water Resources Association
• /
• v.47 no.6
• /
• pp.547-559
• /
• 2014

The objective of this study is to evaluate the performance of the complementary relationship-based evapotranspiration models, namely, advection-aridity (AA) model of Brutsaert and Stricker and the CRAE model of Morton for estimating actual evapotranspiration. Both models were applied to the Bokhacheon middle-upper watershed, and their estimates were evaluated against the water balance estimate. The calculation was made on a daily basis and comparison was made on monthly and annual bases. For comparison, the water balance estimates were not obtained from the observed precipitation and streamflow data but were based on the simulated data by using integrated watershed model, SWAT-K which is the revised version of SWAT. The reason not to directly use the observed data for water balance estimate is that the credible record period is not sufficient and the streamflow has been altered due to water use and release. Overall, the results showed that both AA model and CRAE model with their original parameters overestimate annual and monthly evapotranspiration, and the large difference between the complementary relationship-based approach and the water balance approach occurs especially for the dry season from Nov. to Mar. It was found out that the parameters, particularly for the advection related parameter, must be recalibrated to accurately produce monthly and annual regional evapotranspiration for this study area.