• Journal of Convergence for Information Technology
• /
• v.11 no.8
• /
• pp.84-91
• /
• 2021

In the 21st century, a number of storm and flood disasters caused by rapidly changing climate change is increasing, and the number of flood accidents at construction sites is also increasing. However, no specific reduction measures have been presented and thereby safety management to prevent flood accident need to be improved. Therefore, in this study, the inundation pattern by downpour at the excavation site was interpreted and the inundation risk quantification method was used to classify the risk magnitude. Finally, using the fish-bone diagram, we derived the major reasons of inundation accident at construction site systematically. The simulation results showed that the inundation depths of small-scale excavation sites and excavation sites exceeded 3 m due to the fluid flowing through the excavation surface. In addition, depending on the excavation site, a high velocity temporarily observed and decreased due to the storage effect, or high velocity surpassing 10 m/s continued. Since this type of flooding can pose a risk to most or all workers, if proper management measures are insufficient, fatal damage to life and property could occur. Consideration of the roots of these disasters is judged to be helpful in understanding the causes of inundation accidents that result in casualties and presenting accident reduction measures.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2010.05a
• /
• pp.99-100
• /
• 2010

The objective of this research aims at improving the structural and economical efficiency of small and medium-span reinforced concrete bridges by importing the Inverted-T girders (hereinafter, called as IT). This new Rahmen bridge with IT girders has an advantage over minimizing the construction process which could cause environmental pollution and traffic congestion. Especially it is thought that this new composite bridge can give better aesthetic and view than existing old bridges, and can be a good construction method to solve labor shortage problems due to coming aging society. Therefore, this IT method should be one of very effective construction technologies to improve the constructibility and to reduce the construction cost.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2011.05a
• /
• pp.347-347
• /
• 2011

하천에서의 유사량의 추정은 하천유사 해결을 위한 자료획득이 기본이고, 하천내의 수리구조물의 설계 및 유지관리, 하천개수 및 하도의 안정, 홍수터 관리, 저수지의 설계 및 운영 등 하천계획에 필요한 기본적 요소 중 하나이다. 유사량을 추정하는 방법은 Einstein(1950) 공식이나 Toffaleti(1968) 공식 등과 같은 하천 유사량 공식을 이용한 간접적인 계산방법과 현장 실측을 통한 직접적인 방법이 있다. 그러나 유사량 공식을 이용한 추정은 아직도 그 신뢰성이 떨어지며, 대부분의 기존 유사량 공식들이 하상토 유사량을 위주로 추정하여, 소류사가 지배적인 경우에는 이런 공식들을 이용하여도 어느 정도 신뢰성이 확보되는 결과를 얻을 수 있을 것으로 판단되나, 부유사가 지배적인 하천의 경우 정확도가 많이 떨어지는 것으로 알려져 있다. 따라서, 현재까지 가장 신뢰할 수 있는 방법은 현장실측에 의한 방법이며, 유사량 공식은 부득이한 경우에만 이용하는 것이 바람직하다. 실측 유사량 산정을 위하여 하천 규모에 따라 구분하였으며, 국가하천인 경우 임진강을 대상으로 민간인 출입이 가능한 구간(L = 84.5km), 중소규모하천인 경우 안성천 수계의 황구지천과 인천의 계양천을 대상으로 하였고, 임진강의 경우에는 부유사의 대부분이 이토나 점토로 구성되어 있고 중 상류에서 하상재료의 구성이 대체로 호박돌이나 암반으로 이루어진 부분이 많아 주로 모래로 이루어진 충적하천에서 이용되는 수정 Einstein(1955) 방법에 의한 총 유사랑 추정은 의미가 없기 때문에(한국건설기술연구원, 1992) 본 조사에서는 임진강의 총유사량을 부유사양으로 간주하였으며 다른 유사량 공식을 이용한 부유사량과 비교를 통하여 공식을 제안하였다. 유사량 측정은 하천별로 2007년부터 2009년까지 평수기와 홍수기로 구분하여 측정하였으며, 수리량과 하상토자료를 이용하여 종유사량을 산정하는 Einstein(1950) 공식, Rijn(1984) 공식, Toffaleti(1968) 공식, Shen & Hung(1971) 공식, Yang(1973) 공식, Yang(1979)공식, Ackers & White(1973) 공식, Engelud & Hansen(1967) 공식, Ranga Raju(1981) 공식을 이용하여 결과 값을 비교하였다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.172-172
• /
• 2015

하천에서 발생하는 소류력은 하상 변동을 발생시키기 때문에 주변 구조물이나 하천의 흐름특성 등을 변화시키게 되며, 유사이송, 침식 및 퇴적, 유동해석 등에 매우 중요한 하천 계수이다. 하천에서 소류력의 직접 측정은 매우 어려워 직접 측정 대신 하천경사 및 동수반경을 기반한 단면 평균소류력 산정 공식을 일반적으로 이용한다. 그러나, 이러한 방식은 상세한 유사이송, 세굴 등의 해석에는 한계가 있기 때문에 국부적인 소류력이 필요하다. 실내 실험에서는 프레스톤게이지를 활용한 직접 측정이나, 난류측정을 통한 레이놀즈 분포를 외삽하여 단면에서 국부적인 소류력을 측정하는 방식이 사용되어 왔다. 반면, 실제 하천에서는 국부 소류력 직접측정 및 난류 산정이 거의 불가능하거나 비효율적이므로 대안으로 하천의 연직유속분포에 대수분포를 적용하여 소류력을 추정하는 간접적인 방법이 제시되어 왔다. 일부 실내실험에서 대수법칙을 통한 소류력 산정 방식은 직접 측정을 통해 검증한 바가 있으나 실제 하천은 난류의 공간 시간적 스케일이 실내 규모와 상이하여 국부 소류력에 영향을 미칠 수 있어 이러한 검증결과를 현장 적용하기에는 한계가 있다. 본 연구에서는 실제 규모 하천에서 대수법칙을 활용한 국부 소류력 산정 결과와 레이놀즈 응력의 연직분포 측정을 통해 산정한 값과 비교하여 대수법칙 활용 소류력 산정 방식의 적용성을 검토하였다. 실험은 중소규모의 하천을 재현한 한국건설기술연구원 안동하천실험센터 직선(A1) 및 사행(A2) 하천의 유속측정을 수행하였으며, 유속 측정에는 정밀도가 높으나 실내에서 주로 사용된 초음파지점유속계(Micro ADV)를 현장에 설치하여 사용하였다. ADV의 관측 시간은 90초이며, 직선수로에서는 횡방향으로 25 cm 간격, 수심방향으로는 5 ~ 10 cm 간격으로 측정하였고, 사행수로는 횡방향으로 50 cm 간격, 수심방향 5 ~ 10 cm 간격으로 측정을 수행하였다. 실험결과 대수법칙과 레이놀즈 분포로부터 산정된 국부 소류력은 사행과 직선 모두 상당한 이격을 보였다.

• Journal of Korean Society of Steel Construction
• /
• v.19 no.5
• /
• pp.527-537
• /
• 2007

The main girders and cross-beams of an H-beam bridge consisted of factory-made H-beams, providing better conditions for quality control. Also, on-site fabrication works can be minimized and most of the stiffeners can be omitted, enabling simple and economic construction. In this study, the effect of the Multi-Stepwise TPSM (M-TPSM) on improving the maximum span length and section efficiency is analyzed. Compared to a 30-m-long, five-girder conventional plate girder bridge, structural analysis results showed that 50.7~55.1% of the girder height and 24.1~26.2% of the self-weight may be reduced by the application of M-TPSM to a five-girder H-beam bridge constructed with H-$900{\times}300$beams. In case of conventional H-beam bridges without M-TPSM, it was found that seven girders are required for a similar level of load-carrying capacity. Therefore, it is concluded that by the application of the M-TPSM, the H-beam bridge would become one of most cost-competitive options for short- and medium-span bridges.

• Korean small business review
• /
• v.42 no.2
• /
• pp.139-177
• /
• 2020

The concepts of entrepreneurship are very various. So many researchers are confused or not sure of the concepts of entrepreneurship. Likewise, the concept of entrepreneur are very various, and confused of the concepts of entrepreneur. This study try to set a comprehensive conceptual model of concepts of entrepreneurs. This model suggest a prototype model of entrepreneur with historical context and anthropological approach.

• Korean Journal of Construction Engineering and Management
• /
• v.5 no.5 s.21
• /
• pp.183-192
• /
• 2004

Even in Korea the number of steel structure buildings that allow internal space and easy change of their layouts in accordance with the purpose of buildings and box-type steel bridges constructed with thick plates with thickness in a rage just from a few $\beta$AE to \$100\beta$AE is increasing these days and therefore, domestic fabrication and processing technology of members for steel structures is being improved at a pace faster than in the past to meet the growing requirements of consumers for high reliability on quality control on the related steel structures. However, most domestic fabricators os steel structures who are turning out their steel products in accordance with the designs prepared by engineering companies in their respective works for the sake of cost cut more than anything else, hesitating to introduce any advanced new technology into themselves. In the case of the steel structure design application for small and mid-size buildings in particular, it is quite meaningful not only for those who are involved in steel structure business, but also for the people working at construction work fields to review the result of the study on the connections of steel structure members deigned to obtain superb quality of steel structures within short period for steel fabrication and erection at fields in economical ways, as there is a glowing tendency seeking standardization of connection of steel structure members as well as whole structure together with the development on design of construction system of buildings including their exterior and interior decoration materials, manufacture of the related members and fabrication technique structure. This paper has been prepared with the aim to review the peculiar characteristics of buildings constructed with the main frames of steel structures and actual cases of the change made ing the connections between steel structure columns and between columns and girder members in order to reduce the work period necessary for fabrication and erection of steel structures at the maximum as well as the some examples of steel structures fabricated through automatic welding by robots for box-type columns in addition to the description of the problems found in the course of fabricating those steel structures, suggesting possible counter-measures to solve them.

• Journal of the Korean GEO-environmental Society
• /
• v.21 no.10
• /
• pp.11-16
• /
• 2020

Korea's agricultural reservoir is one of the country's major infrastructures and plays an important role in people's lives. However, aging reservoirs are a risk for life and property. Currently, large and small dams and reservoirs have been constructed nationwide for more than 40 years of aging. Dams and reservoirs built nationwide are managed by various institutions. Therefore, it is difficult to manage all dams and reservoirs due to cost and time. Managers in the field with less management personnel and lack of expertise should be able to quickly identify risk factors for multiple reservoirs. In this study, risk factors such as seepage, leakage, settlement slide, crack and erosion were selected. To assess the risk of the items, we used the analytical hierarchical process (AHP), one of the Multi-Criteria Decision Making (MCDM) methods. The analysis showed that seepage has the greatest impact on reservoir collapse. It is judged that the priority of detailed diagnosis can be determined by evaluating the risk of dam reservoir collapse in a convenient way in advance using the calculated weight.

• Korean Journal of Construction Engineering and Management
• /
• v.13 no.5
• /
• pp.64-75
• /
• 2012

Today organizations are making considerable efforts in order to maintain excellent talent, and in particular, they are focusing on understanding their intentions of changing jobs which are most highly correlated with job turnover. In the case of architectural design firms, its intensity of work is very high unlike industrial settings, and it not only takes much time to cultivate new men of talent and but also is characteristic that employees can change livery easily because of the flexible labor market. The turnover rated by National Statistical Office indicates that specialized, scientific and technical service industry including the architectural design firm has a relatively high turnover rate compared to the average of the turnover rate of the overall industries. However, studies on intentions of changing jobs until now were conducted focused on employees engaged in other industrial areas, and it is true that studies regarding intentions of changing jobs of practitioners of architectural design firms are very insufficient. In this context, the present study aimed to draw determinants affecting intentions of changing jobs of practitioners of architectural design firms, to objectively understand the practitioners' intentions of changing jobs through importance analysis by each factor based on this and to make a comparative analysis of differences between the large scale architectural design firms and the small and medium sized architectural design firms.

• Korean Journal of Environmental Biology
• /
• v.38 no.4
• /
• pp.634-649
• /
• 2020

Recently, stream longitudinal connectivity has been a topic of investigation due to the frequent disconnections and the impact of aquatic ecosystems caused by the construction of small and medium-sized weirs and various artificial structures (fishways) directly influencing the stream ecosystem health. In this study, the international and domestic research trends of the longitudinal connectivity in aquatic ecosystems were evaluated and the applicability of fish-based longitudinal connectivity models used in developed countries was analyzed. For these purposes, we analyzed the current status of research on longitudinal connectivity and structural problems, fish monitoring methodology, monitoring approaches, longitudinal disconnectivity of fish movement, and biodiversity. In addition, we analyzed the current status and some technical limitations of physical habitat suitability evaluation, ecology-based water flow, eco-hydrological modeling for fish habitat connectivity, and the s/w program development for agent-based model. Numerous references, data, and various reports were examined to identify worldwide longitudinal stream connectivity evaluation models in European and non-European countries. The international approaches to longitudinal connectivity evaluations were categorized into five phases including 1) an approach integrating fish community and artificial structure surveys (two types input variables), 2) field monitoring approaches, 3) a stream geomorphological approach, 4) an artificial structure-based DB analytical approach, and 5) other approaches. the overall evaluation of survey methodologies and applicability for longitudinal stream connectivity suggested that the ICE model (Information sur la Continuite Ecologique) and the ICF model (Index de Connectivitat Fluvial), widely used in European countries, were appropriate for the application of longitudinal connectivity evaluations in Korean streams.