• Science of Emotion and Sensibility
• /
• v.15 no.2
• /
• pp.177-182
• /
• 2012

Automotive sub-mat carpet for convenience and comfort of floor administration is additional supplemented floor mat. Sub Mat Backing of the current vehicle's materials reclaimed rubber, PVC, etc. are used, but secondary rubber and PVC Backing have bad sound absorption. Also rubber is heavy too. Contact surfaces between PET staple fiber, PET non-woven, PVC backing and car's floor carpet was measured the coefficient of friction for each sub-mat's non-slip evaluation. A surface of PET non-woven sub-mat has the highest coefficient of friction. Each of sample was observed by optical microscope the contact surfaces before and after. Contact surfaces of PET staple fiber sub-mat was changed increasingly to non-woven. This fact is shown that the sub-mat would be tangled between its contact surface and top of the floor carpet. It is expected to be highly non-slip. In case of PET non-woven sub-mat had not different for contact surfaces between before and after. And PVC backing was shown lower non-slip than other samples. The result of optical microscope and coefficient of friction is seems to be related.

• Horticultural Science & Technology
• /
• v.31 no.3
• /
• pp.289-298
• /
• 2013

Effects of curing treatments and storage temperature on the quality of Chinese yams (Dioscorea polystachya Turcz.) were investigated stepwise in three consecutive years for the optimization of postharvest handling procedures. Tuberous roots were harvested in early to mid November and cured under ambient or $29^{\circ}C$ heated air conditions for various periods according to the treatment conditions. Storage temperatures in the range of 0.5 to $7.5^{\circ}C$ were phased in to avoid chilling injury while examining storage potential from 4 to 7 months. As poststorage technology, short-term $60^{\circ}C$ hot-air exposure or low shelf temperature treatments were additively imposed. Curing treatments, especially heated air curing for 3-5 days tended to reduce the respiration and weight loss during storage while maintaining flesh firmness. Storage at $0.5^{\circ}C$ brought out typical chilling injury symptoms on the shelf with increases in respiration and lower flesh firmness by tissue breakdown resulting in the rapid loss of marketability. Optimum storage temperature appeared to be the $3-4^{\circ}C$ range which suppresses quality deterioration while avoiding chilling injury. Low shelf temperature seemed to be a necessary part of postharvest handling system to keep marketability through control of poststorage disorders such as rooting and decay. Overall results suggested that optimized postharvest program consisting of heated-air curing, storage at $3-4^{\circ}C$, and low shelf temperature could extend storage potential of Chinese yam to longer than 7 months.

• Journal of the Korea Concrete Institute
• /
• v.13 no.5
• /
• pp.438-446
• /
• 2001

Recently, porous concrete has been used for the purpose of decreasing the load of earth environment. It consists solely of cement, water and uniform-sized coarse aggregate. And its fundamental properties will be considerably affected by the physical properties of aggregate because the aggregate occupies for the most part in its mix proportion. For such a reason, this study was carried out to investigate the influence of the sizes and kinds of aggregate for the fundamental properties of porous concrete. It showed that the fundamental properties of porous concrete were the similar value in all sizes of aggregate except in the case of using the 2.5∼5㎜ aggregate and were varied according to the kinds of aggregate. In particular, compressive strength of porous concrete using 2.5∼5㎜ aggregate was more higher than that using other aggregate, and its void ratio and coefficient of permeability was lower. And the maintenance capacity of permeability of porous concrete was varied by the sizes and the kinds of aggregate. In particular, it was greatly decreased in case of using the 2.5∼5㎜ aggregate. And unlike dynamic modulus of elasticity of ordinary concrete, that of porous concrete was very high value in early ages and was slowly increased after that time.

• Current Research on Agriculture and Life Sciences
• /
• v.7
• /
• pp.99-107
• /
• 1989

The study was conducted to obtain some basic information to establish the system of performance-tests and selection of honeybee queens(Apis mellifera) under Korean circumstances, Colony performances were tested with thirty colonies of Apis mellifera at two apiaries in Taegu, Korea from September, 1988 to August 1989. The results of performance-testing on the colonies are summarized as follows : The colony weight measured before wintering was averaged $23.6{\pm}1.90kg$ and the colony weight was decreased by $2.9{\pm}0.82kg$ in average during winter season. Thirteen colonies were entered in two story hive from thirty single box colonies from April 17 to May 5, 1989 with increase of bee population and, consequently, the ability of enter-supers of the colonies apperared to be low. The ability of collecting pollen was measured to be $14.8{\pm}2.15gr$ per colony during 24 hours in April, and the number of swarm cells was counted $12.5{\pm}3.43$ cells per colony in aveage. Tendency to use propolis appeared to be moderate, and the number of returning foragers for a minute per colony was counted $108.7{\pm}18.31$ bees in average. Brood area was measured $2,464{\pm}628,67cm^2$ per colony in the post nectar flow season of acasia, and 30.8 percent of the colonies appeared to be infected with chalkbrood disease, The amount of honey production was $14.9{\pm}8.49kg$ per colony, which was harvested two times during the main nectar flow season of acasia.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.39 no.4
• /
• pp.11-17
• /
• 2011

This study focused on the regulations and support system of green rooftop landscaping between Korea and China. Our research found out regulations and support system to review the supplement point to understand the present state of green rooftop landscaping in the two countries. We aimed to provide basic legal information for the development of green rooftop landscaping regulations. Also, a management plan guide and after-evaluation guide were suggested. First, roof load safety is the foremost factor for the structure of green rooftop landscaping. It includes not only considering the weight of construction materials, but also accurately calculating weight of rain, snow and the rooftop's capacity for people when the rooftop is designed. Second, the appropriate waterproof and root material should be selected basing on climatic conditions. Third, a maintenance and management plan needs to be established to regularly check the plant, facilities, soil and to maintain them. Fourth, the criteria of quality inspection are waterproof and root resistant material, and the growth and development of plants. Waterproof and root resistant materials are a very important part of rooftop greening, so they must be strictly inspected after construction. Fifth, the support system of rooftop greening should be continuously improved. The choice of the object and the amount of support should be strictly stipulated so that the construction of rooftop is promoted when volunteers do rooftop greening.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.40 no.2
• /
• pp.221-227
• /
• 2016

The main shaft is one of the key components connecting the rotor hub and gear box of a wind power generator. Typically, main shafts are manufactured by open die forging method. However, the main shaft for large MW class wind generators is designed to be hollow in order to reduce the weight. Additionally, the main shafts are manufactured by a casting process. This study aims to develop a manufacturing process for hollow main shafts by the open die forging method. The design of a forging process for a solid main shaft and hollow shaft was prepared by an open die forging process design scheme. Finite element analyses were performed to obtain the flow stress by a hot compression test at different temperature and strain rates. The control parameters of each forging process, such as temperature and effective strain, were obtained and compared to predict the suitability of the hollow main shaft forging process. Finally, high productivity reflecting material utilization ratio, internal quality, shape, and dimension was verified by the prototypes manufactured by the proposed forging process for hollow main shafts.

• Journal of Korean Society of Environmental Engineers
• /
• v.33 no.3
• /
• pp.202-211
• /
• 2011

In this study the seasonal and spatial pattern of mercury (Hg) concentrations in multimedia environments were investigated in Lake So-Yang. Total mercury (TM) in water column greatly enhanced as turbidity and particulate organic carbon (POC) increased due to the severe runoff, suggesting that most of Hg existed as particulate Hg in Lake Soyang. We also collected 22 species of fish in Lake Soyang and Han River, and the average total mercury in fish was 0.073 ppm, lower than both Korean (0.5 ppm) and EPA criteria (0.3 ppm). However when considering the amount of fish intake for Korean the Hg criterion in fish must be more stringent than current value, and the advisory for fish consumption should be made. Hg in fish considerably varied with sampling sites, having the highest in the upper region (Yang-gu) and the lowest in downstream (Han River). This spatial variation was possibly derived by "bloom dilution" associated with high phosphorus loading or elevated DOC concentrations, or both. Total mercury in sediment varied from 69.9 to $98.3{\mu}g/kg$, which was relatively lower than those measured in Voyageurs National Park in Minnesota in USA ($102{\sim}364{\mu}g/kg$).

• Journal of Conservation Science
• /
• v.33 no.6
• /
• pp.467-483
• /
• 2017

In this study, the degradation properties by temperature stress of $Araldite^{(R)}$ rapid-curing epoxy resin used for inorganic cultural heritages, was identified. The tensile and tensile shear strength of durability decreased for 12,624 hours at temperatures of $40{\sim}60^{\circ}C$. In terms of stability of external stress and temperature, the slow-curing epoxy was superior to the rapid-curing epoxy, and cultural heritage conservation plans should therefore consider the strength and stress properties of restoration materials. Color differences increased for 12,624 hours at temperatures of $40{\sim}60^{\circ}C$, and glossiness decreased. Both color and gloss stability were weak, which necessitates the improvement of optical properties. Thermal properties (weight loss, decomposition temperature, and glass transition temperature) of adhesives are linked to mechanical properties. Interfacial properties of the adherend and water vapor transmission rates of adhesives are linked to performance variation. For porous media (ceramics, brick, and stone), isothermal and isohumid environments are important. For outdoor artifacts on display in museums, changes in physical properties by exposure to varying environmental conditions need to be minimized. These results can be used as baseline data in the study of the degradation velocity and lifetime prediction of rapid-curing epoxy resin for the restoration of cultural heritages.

• Journal of Applied Biological Chemistry
• /
• v.61 no.1
• /
• pp.25-31
• /
• 2018

This study investigated the effect of different $O_2$ transmission rate (OTR) of films on surface temperature, weight loss, pH, $O_2$, $CO_2$ and sensory characteristics, microbial quality, total phenolic contents and 1,1-diphenyl-2-picryl hydrazyl radical scavenging activity of fresh-cut lettuce during storage at $10^{\circ}C$ for 7 days. $80{\pm}5g$ of fresh-cut lettuce were packaged with oriented polypropylene films respectively. The OTR of packaging materials was 5,000, 8,000 and $10,000cc/m^2{\cdot}day{\cdot}atm$. Quality characteristics showed significant differences during storage. The surface temperature was averaged 13 and lower in higher OTR of films. The weight loss of lettuce ranged from 2.8 to 5.4% and the highest loss showed in $5,000cc/m^2{\cdot}day{\cdot}atm$ of film. pH was increased during storage and the highest pH was found in $5,000cc/m^2{\cdot}day{\cdot}atm$. The $O_2$ content in the packaging was decreased with increasing $CO_2$ content during storage. The lowest $CO_2$ was found in $10,000cc/m^2{\cdot}day{\cdot}atm$. As OTR was decreased, antioxidant profile of lettuce was decreased. Total aerobic bacteria showed from 5.48 to 6.59 log CFU/g. From the result of the overall sensory test, the marketability of fresh-cut lettuce stored at $10^{\circ}C$ seemed to be maintained effectively over 5 days.

• Journal of Korean Society of Steel Construction
• /
• v.27 no.1
• /
• pp.23-30
• /
• 2015

Developed in this study were Octagonal-hollow-section(OHS) struts, whose compressive strengths against flexural and local buckling is higher than H-shape or rectangular-hollow-section(RHS) struts with the same unit weight. OHS members are also advantageous in handling and storing compared to circular hollow sections(CHS). OHS members were fabricated from HR Plates by cold forming and fillet welding. 5 numbers of 20m long OHS struts were assembled, each of which consist of two 9.6m long OHS member and two end connection elements made of cast iron. The compressive strength of the OHS strut was evaluated by comparing the test results, design codes and FEM analysis each other. Test results show that all of the struts have almost same or larger compressive strength than Korean Road Bridge Design Code(KRBDC) (2012). The initial imperfections can be estimated by using measured strains and are turned out to be less than L/450 for all the struts tested. The results of FEM analysis show that the variation of initial imperfection has less effects on the compressive strength for struts with vertical surcharge than for those with self-weight only, while the strength decreases as the initial imperfection increases. As the result of this study, the allowable initial imperfection for 20m long OHS struts is recommended to be less than L/350 on job sites.