• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2017.05a
• /
• pp.26-29
• /
• 2017

KARI has been conducting R&D for independent development of KSLV-II since 2010. Vehicle holding device is a device for vertically standing SLV on the launch pad of launch complex and fixing the lower part of vehicle in order to firmly fix vehicle so that SLV does not fall from an external load such as a wind load. When thrust generated after the 1st stage engine ignition of SLV must exceed the takeoff weight of vehicle, and holding device should be quickly released so that it does not interfere with takeoff of vehicle like other ground equipment at the beginning of the launch. Pyro-valve is one of the key components constituting VHD, and it should have high reliability and quick response characteristics with similar functional parts applied to launch vehicle separation device and satellite separation device. Through this paper, I intend to broaden the overall understanding of the development process of pyro-valve for VHD and KSLV-II.

• Journal of Bio-Environment Control
• /
• v.18 no.4
• /
• pp.481-491
• /
• 2009

This study was conducted to observe some characteristics of aneuploid trees obtained from the crosses between diploid and triploid in the first experiment. The results showed that the difference among the percentage of aneuploid's pollen grain germination was large, and all of them were lower than that of diploid 'Hongro' (82.4%). The average weight and size of each aneuploid's fruit was far lighter and smaller than that of diploid 'Hongro'. According to the width and length, all of the fruits shape was flat or short-globose conical shape except for JF3942. Almost all the aneuploid had higher sugar content than 'Hongro', nearly half of aneuploid fruits were firmer than that of diploid 'Hongro'. As for the acid contents of aneuploid fruits, the results were greatly different from those of previous studies on diploid apples, in present study the citric acid and tartaric acid contents were more than the malic acid which are dominant acid in most cultivars of apples. Both the length and width of aneuploid tree were shorter than that of diploid 'Hongro'. Most aneuploid trees' height was longer than width, but there were 4 exceptions. The size of leaves was smaller than that of diploid 'Hongro' according to the length and width of leaves measured. In all, aneuploid's vegetative growth is not as vigorous as diploid.

• Journal of Sericultural and Entomological Science
• /
• v.29 no.2
• /
• pp.31-37
• /
• 1987

Mulberry leaf sprayed on at the various concentrations of cadmium (Cd) was fed on the just molted fifth instar through the 6th day of the fifth instar and content of cadmium and zinc in the feces, organs and tissues involved were analyzed by spectrophotometer. Along with the effect of those heavy metals on development of the relevant organs and tissues sexwise. 1. The residual content of cadmium on mulberry leaf was about 50% of the total cadmium and the weight of feces disposed from the cadmium fed larvae was less than the control. There was distinctive differences in female-wise disposal of feces between cadmium treatment and control ; cadmium treatment female larvae disposed less feces than female of control. 2. Fourteen percent of the total dry weight of the anterior plus the middle silkgland and of the posterior silkgland in cadmium 100ppm treatment was decreased in female but only 9% of the anterior plus middle silkgland in male was made, showing no decrease the weight of the posterior silkgland in male. 3. Decrease of the dry weight of the silkgland, fat body and hindgut was made in cadmium 100ppm treatment and contrarily the weight of midgut and malphihian tube were increased. The total larval weight of the female and male were decreasd in cadmium 100ppm treatment and the decreasing ratio was higher in famale. 4. There wasa no detection of cadmium in all of the organs and tissues of the control and in those of the cadmium treatment the high residual content was in order of the midgut, hindgut, malphighian tube and head. A slight accumulation of cadmium was shown in fat body and silkgland. 5. Cadmium accumulation in the midgut was higher than in female but in the fat body, malphighian tube, trachea and integument was contrarily high in the female than male. 6. The total zinc content of the larvae was below 60ppm in the control and 80ppm in cadmium 100ppm treantment. The increase of zinc content in cadmium treatment was made on silkgland, malphigian tube and midgut but contrarily the decrease of zinc content in fat body was resulted. 7. In cadmium treatment, much more cadmium accumulation took place in the female and zinc accumulation was made much more in the male.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.8 no.2
• /
• pp.324-331
• /
• 1998

After the addition of yttrium aluminum garnet of 2, 5, 10 mol% as a sintering aid, $\alpha$-silicon carbides were prepared by a liquid-phase sintering at $1850^{\circ}C$, and the microstructural evolution was investigated during sintering as functions of liquid-phase amount and sintering time. The highest apparent density in each compositions was obtained in specimens sintered for 2 h, and the percentage of weight loss increased with sintering time. By increasing the amount of sintering aid (yttrium aluminum garnet), the rate of grain growth during sintering decreased, but the apparent density of sintered body increased. The phase transformation from 6H-SiC to 4H-SiC was partially observed in specimens sintered for a long time, and so, a few rod-like grains were observed.

• Journal of the Korea Concrete Institute
• /
• v.24 no.1
• /
• pp.53-60
• /
• 2012

The main object of this paper is to investigate the effects of high temperatures on the physical and mechanical properties of natural sand concrete(NSC) and crushed sand concrete(CSC). Test samples were exposed to high temperature ranging from $200^{\circ}C$ to $800^{\circ}C$. After exposure, various tests were conducted. Color image analysis and weight losses were determined and compressive strength test and splitting tensile strength test were conducted. The results indicated that weight losses increased as exposure temperature increased with comparable decreasing rate. The results also showed that compressive strength and splitting tensile strength and modulus of elasticity decreased as exposure temperature increased. The results also showed that residual compressive strength of NSC decreased more drastically than that of CSC at $200^{\circ}C$ and $400^{\circ}C$. Residual splitting tensile strength of NSC decreased more than that of CSC at $200^{\circ}C$, while NSC and CSC showed comparable residual strength ratio at $800^{\circ}C$.

• Journal of the Korean Society of Groundwater Environment
• /
• v.4 no.2
• /
• pp.103-108
• /
• 1997

A series of batch tests were conducted to evaluate the design parameters for the application of soil washing techniques to the hydrophobic organic compounds (HOCs)-contaminated soil using mixed surfactants. Because the mixed surfactants form different structures of molecular aggregates from single surfactant, they were applied to improve the washing efficiency. Kinds of surfactants added, mixing ratio, and total concentration of mixed surfactants were evaluated. The uncontaminated soil was obtained from a country hill near Nock-Chun Station in Seoul. The portion of soil passing #4 (4.75 mm) sieve was used. The pH, organic contents and cation exchange capacity were 4.4, 1.6% and 4.08 meq/100 g, respectively The soil was artificially contaminated by n-dodecane. The 5% solution of OA-5 and OA-14 (1:1) showed 86% washing efficency. The 4% solution of SDS and OA-5 (1:1) showed 95% washing efficiency.

• Journal of Advanced Navigation Technology
• /
• v.24 no.6
• /
• pp.491-499
• /
• 2020

There are policies that foster the drone industry, which either put a legal precedent on drones through the "Drone Act" or grant a delay or exemption in applying the safety measures of "the Aviation Safety Act". Yet, the definition of a drone is unclear, requiring further discussion on commercial usage. Therefore, we have studied cases domestically and abroad, and also analyzed issues with the current aviation legislation. It was found that a drone is defined as "an unmanned aircraft where a pilot is not on board, and its net weight is 150 kg or less". However, there are several issues, such as that a drone taxi requires a pilot on board, and its weight is 150 kg or more. Thus, we propose to define a drone as "an unmanned aerial vehicle (provided, that its own net weight should be 300 kg or under, or not be limited to weight) under Article 2 (3) of the "Aviation Security Act" as prescribed by Ordinance of the Ministry of Land, Infrastructure, and Transport, which operates either by remote, automatically, or autonomously; or an unmanned aircraft under Article 2 (6) of the "Aviation Security Act".

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2006.11a
• /
• pp.122-126
• /
• 2006

Two types of pressurization system and low weight feeding piping system are developed. With sub-system tests, ullage pressure control performance was verified for 1 step and 2 step pressurization system and the feeding performance of feeding piping system was also verified. The weight of the feeding piping system is low enough for the application of launch vehicle. In addition, LOX conditioning system is developed for avoiding geysering and LOX temperature rise. Integrated performance was verified through integrated on-board feeding system performance tests.

• KSBB Journal
• /
• v.17 no.1
• /
• pp.54-58
• /
• 2002

Curdlan gel containing various hydrophobic materials was prepared. The homogenized suspension of curdlan and hydrophobic materials was healed at $100^{\circ}C$. The curdlan gel can contain hydrophobic material up to 27%(v/v). When gel was compressed, only water in the gel was removed. When immersed in water, the dried gel absorbed water and became the original wet gel. The syneresis of gel decreased with the concentration of hydrophobic material added. DHA content of dried gel was about 90%. $\beta$-cyclodextrin inclusion complexes containing DHA were prepared with addition of water and ethanol. X-ray diffractograms of complexes showed a specific peak at 7-$8^{\circ}C$ and FT-IR spectrum of complex showed a specific C=O peak at $1745\textrm{cm}^{-1}$. Inclusion complex containing DHA was microcapsulated with curdlan and pullulan.

• The Bulletin of The Korean Astronomical Society
• /
• v.37 no.2
• /
• pp.192.2-192.2
• /
• 2012

위성시스템 소형화, 탑재체 수용증대, 발사비용절감, 탐사임무 효율화 등의 요구로 인하여, 위성 설계에 있어 경량화는 오랜 기간 진행되어온 연구 주제였다. 이러한 연구결과로서, 위성 구조체를 복합재료로 대신하기 위한 구조 경량화 연구와 적용이 성과를 거두었으며, 현재 위성체 프레임이나 전개형 안테나, 광학구조물 등에 경량 탄소섬유 강화 복합재료의 적용은 보편화되어 있다. 한편, 위성시스템에서 전력, 통신, 명령/데이터처리, 자세제어 및 관측기기의 각종 전자장비를 보호하는 하우징 구조물에는 여전히 금속재료가 광범하게 적용되고 있다. 특히, 알루미늄 합금은 하우징 재료로 널리 사용되는데, 강도, 강성, 열전달, 우주방사, 전기전도도 및 EMI 차폐특성과 더불어 가공성이 우수하다는 장점을 지닌 반면에, 금속재료로서 중량이 상당하여 위성 경량화 관점에서는 한계를 갖게 하는 단점이 있다. 전자장비에 부여된 전자기능 측면에서 보면, 하우징은 기생 구조물로서, 경량으로 제공될수록 전자장비 전체 무게에서 전자유닛만의 무게가 차지하는 전기전자기능비가 향상되고 위성 경량화에 크게 기여할 수 있다. 구조 경량화를 위하여 전자장비 하우징을 경량 복합재로 대체하여 설계 및 제작하였으며, 복합재 하우징의 강도, 강성, 열전달, 우주방사, 전기전도도 및 EMI 차폐를 검증할 수 있는 방법에 대하여 검토하였다.