• Journal of Korean Society of Steel Construction
• /
• v.11 no.2 s.39
• /
• pp.223-232
• /
• 1999

For the design and maintenance of highways and road structures, the statistical data are needed for the vehicle, especially heavy truck crossing. So far, static weighing has been used but it needs fixed station, crews, and it takes a lot of time. Also truck mix and headway distances cannot be obtained. Bridge Weigh-In-Motion system uses the bridge as a weighing scale and collects the axle weights, axle distances. vehicle types and etc. without stopping or slowing down the vehicle. In this study, for the first time in the country, BWIM system is applied on steel I-girder bridge and its applicability is examined. Also data collected in this system is analyzed to get truck traffic characteristics including average daily truck traffic, weight distribution, typical truck configuration and overweight truck status. The results are compared with other data from weighing station and highway toll gates.

• Journal of Advanced Navigation Technology
• /
• v.24 no.6
• /
• pp.491-499
• /
• 2020

There are policies that foster the drone industry, which either put a legal precedent on drones through the "Drone Act" or grant a delay or exemption in applying the safety measures of "the Aviation Safety Act". Yet, the definition of a drone is unclear, requiring further discussion on commercial usage. Therefore, we have studied cases domestically and abroad, and also analyzed issues with the current aviation legislation. It was found that a drone is defined as "an unmanned aircraft where a pilot is not on board, and its net weight is 150 kg or less". However, there are several issues, such as that a drone taxi requires a pilot on board, and its weight is 150 kg or more. Thus, we propose to define a drone as "an unmanned aerial vehicle (provided, that its own net weight should be 300 kg or under, or not be limited to weight) under Article 2 (3) of the "Aviation Security Act" as prescribed by Ordinance of the Ministry of Land, Infrastructure, and Transport, which operates either by remote, automatically, or autonomously; or an unmanned aircraft under Article 2 (6) of the "Aviation Security Act".

• Journal of Food Hygiene and Safety
• /
• v.34 no.4
• /
• pp.325-333
• /
• 2019

The present study was carried out to identify the distribution characteristics of heavy metals in ginseng and wood-cultivated ginseng reduction of dietary exposure. Samples of ginseng and wood-cultivated ginseng were collected from 14 and 5 regions across Korea, respectively. Lead (Pb), cadmium (Cd) and arsenic (Ar) were detected by ICP-MS after microwave digestion, whereas aluminum (Al) was determined using ICP. Cultivated ginseng peels were 16.2% of whole root, while the peels and fine roots amounted to 21.8% and 16.8% of whole wood-cultivated ginseng, respectively. Taking into account the weight and concentration of the heavy metals by root part, their distribution ratios were calculated and compared. The cultivated ginseng peels contained 40.3% Pb, 25.9% Cd, 47.6% As, and 89.9% Al. Meanwhile, heavy metals consisting of 27.2% Pb, 28.2% Cd, 48.3% As, and 56.8% Al were distributed in the peels of the wood-cultivated ginseng. There was no significant difference between the peels and fine roots of the wood-cultivated ginseng with respect to the distribution proportion of heavy metals, except for Al. These results indicate that the level of dietary exposure to heavy metals could be reduced by peeling ginseng and wood-cultivated ginseng prior to consumption.

• Asia-pacific Journal of Multimedia Services Convergent with Art, Humanities, and Sociology
• /
• v.7 no.6
• /
• pp.719-729
• /
• 2017

Recently, the field of agriculture has been gaining a new leap with the integration of ICT technology in agriculture. In particular, smart farms, which incorporate the Internet of Things (IoT) technology in agriculture, are in the spotlight. Smart farm technology collects and analyzes information such as temperature and humidity of the environment where crops are cultivated in real time using sensors to automatically control the devices necessary for harvesting crops in the control device, Environment. Although smart farm technology is paying attention as if it can solve everything, most of the research focuses only on increasing crop yields. This paper focuses on the development of a system architecture that can harvest high quality crops at the optimum stage rather than increase crop yields. In this paper, we have developed an architecture using apple trees as a sample and used the color information and weight information to predict the harvest time of apple trees. The simple board that collects color information and weight information and transmits it to the server side uses Arduino and adopts model-driven development (MDD) as development methodology. We have developed an architecture to provide services to PC users in the form of Web and to provide Smart Phone users with services in the form of hybrid apps. We also developed an architecture that uses beacon technology to provide orchestration information to users in real time.

• Journal of Advanced Navigation Technology
• /
• v.24 no.1
• /
• pp.1-8
• /
• 2020

In this research, we develop an airborne equipment radiating S/C-band signal to a target located at a long distance. RF interface of the equipment comprises band-specific transmitters and an broadband antenna to satisfy EIRP(effective isotropic radiated power) requirements. The equipment is in a shape of a POD like an aircraft fuel tank. The measured weight of the equipment is 119.8 kg, the CG(center of gravity) is 1391.35 mm and the MOI(moment of inertia) are 46.07 ± 0.05(I_yy) kg·㎡, 45.36 ± 0.09(I_zz) kg·㎡. All results are found to meet the requirements for aircraft installation. To verify flight safety, EMI(electromagnetic interference) tests (RE102, CE102), environmental tests (high/low temperature operation, altitude), intra-system EMC(electromagnetic compatibility) and HERP(hazards electromagnetic radiation personnel) tests have been conducted and all the test results met the requirements. It is confirmed that the equipment could be mounted on the aircraft by meeting all electrical and mechanical requirements.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.41 no.10
• /
• pp.827-832
• /
• 2013

Heating wire cutting type separation mechanism has been widely used for cube satellite applications due to its design constraints such as small size of $10cm{\times}10cm{\times}10cm$ and light weight of less than 1kg. In addition, usage of pyro technic device is not allowed for cube satellite application. The conventional methods have some disadvantages of relatively small mechanical constraint force and the system complexity for the multi-deployable systems. In this paper, a separation nut type non-explosive separation mechanism has been proposed and investigated. The effectiveness of the design has been verified through the qualification tests of the mechanism.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.04a
• /
• pp.169-172
• /
• 2008

Carbon fiber reinforced polymer (CFRP) laminates can be used more efficiently in strengthening applications by applying prestress to the CFRP laminates. A key problem for prestressing with CFRP laminates is anchoring the laminates. These may include fracture to the CFRP laminates due to excessive gripping force or slippage of the CFRP laminates out of the anchorage zone caused by low friction between the anchor device and the lamiantes. The main objective of this study is the development of an applicative mold-type anchorage system for prestressed CFRP laminates through experimental study. The experimental parameters were the type of anchorage detail and the effect of surface treatment. The test results showed that the developed anchor assures 100% CFRP laminate strength.

• Journal of Animal Environmental Science
• /
• v.17 no.2
• /
• pp.81-92
• /
• 2011

When we bury the infected poultry into the ground, we have many problems such as the difficulty of making sufficient area for burying, environmental contamination by the leachate, unpleasant ordor. Also, in case of burning the carcass of the infected poultry, there are some problems such as high cost, dust, unpleasant odor, etc. It could cause environmental contamination which many peoples and environmental organization complains about. In this study, we develop a treating system which treats the infected poultry carcass in a environmental method preventing the environment contamination. This system is composed of many processes. The euthanasia system uses rigid vinyl to trap and to do a euthanasia the infected poultry with lethal gas, carbon dioxide. And then, with the tractor attached grappler infected poultry carcass could be put into the carcass treating system. The euthanasia system uses rigid vinyl to trap the infected birds and to confine lethal gas, carbon dioxide. Infected poultry carcass are moved to carcass disposal system by collecting device which is attached at tractor. The carcass treatment system (capacity of disposal : 6.3 $m^3$) is installed on a truck and do one pass work, which is input, crush, stir, sterilize, and discharge treated carcass. 1,000 chickens was killed within 9.7min by $CO_2$ (300L/min) in the tent (10 $m^3$). The collecting device could carry 142 chickens at a time, and the movable carcass treatment system could sterilize 2 tons carcass per hour (at one time). This treatment systems was eco-friendly because it reduced the volume of carcass by 31.9% with no wastewater generation.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.44 no.10
• /
• pp.911-920
• /
• 2016

For the pitch and yaw axis attitude control of launch vehicle, thrust vector control which changes the direction of thrust during the engine combustion is commonly used. Hydraulic actuation system has been used generally as a drive system for the thrust vector control of launch vehicles with the advantage of power-to-weight ratio. Nowadays, due to the developments of highly efficient electric motor and motor control techniques, it has done a lot of research to adopt electro-mechanical actuator for thrust vector control of small-sized launch vehicles. This paper describes system design and test results of the prototype of direct drive electro-mechanical actuation system which is being developed for the thrust vector control of $3^{rd}$ stage engine of KSVL-II.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2018.05a
• /
• pp.61-61
• /
• 2018

본 연구에서는 전자 플로터 시스템의 관한 것으로, 특히 수표면 위에서 작용하는 바람, 파도 등의 영향을 거의 받지 않으면서 물의 흐름방향에 순응하여 이동할 수 있도록 함으로써 정확한 유속 측정이 가능하도록 한 연직 다 지점 GPS 전자 플로터 시스템 및 이를 이용한 유속 측정방법을 제시하였다. 일반적으로 대기나 해양, 하천 등에서 유동 유체의 유동상태를 파악하기 위하여 다양한 연구가 진행되고 있다. 이 같은 연구에서 유체의 유동 특성을 파악하기 위해 시뮬레이션을 통한 모델링을 하는 것이 한 방법이나, 이는 실제 유체가 유동하는 환경에서 발생되는 요인들을 나타내기 위해서는 한계가 있기 때문에 실제 측정을 통한 검증만큼 실제적이진 못하였다. 본 연구의 유속 측정 장치는 GPS 수신기를 탑재한 GPS 전자플로터가 수표면에 부유하고 라인으로 연결된 수중 추진부인 가이드볼, 중량보강부재로 구성되어져 있다. 기존 연구의 GPS 전자플로터는 1구형으로 표면유속만 측정 할 수 있었고 바람, 파도와 같은 외부영향에 대한 단점이 있었다. 이를 보완하기 위해 연직 다 지점 GPS 전자 플로터를 개발하였으며 이는 수표면 위에서 가해지는 바람, 파도 등의 영향을 거의 받지 않고, 하측에서 지지해주는 가이드볼이 물의 흐름에 의해 자연스럽게 자전할 수 있도록 구성되어져 보다 원활하게 물의 흐름에 순응하여 이동하고 수심에 따라 가이드볼 개수를 조절할 수 있기 때문에 대하천에서 운용이 가능하다. 이러한 유속 측정 장치 개발은 접근의 위험성과 안정성이라는 장점을 가지고 있으며 대하천 및 중소하천에서도 다양하게 운용이 가능하다. 또한 화학유출사고와 같은 문제가 많이 발생하는 요즘 화학사고와 관련된 연구들에 많은 도움이 될 것으로 사료된다.